<div>Hello everyone!</div><div> </div><div>I am working on a project, a high rise office building. The architect added louvers as part of the design which I admire for sophistication. Attached is a picture that shows the louvers outside for shading. But, when I did the initial run, the effect of the louvers is only around 1% energy improvement from the baseline.</div>
<div> </div><div>Please let me know if there is a better way to do it in eQuest. What I did was to measure the louver thickness and proportioned it to the glass area that it covers. I put the fraction as "Transmittance:" in Building and Fixed Shades properties. Doe 2 help says: <h5>
<font color="#666600">TRANSMITTANCE</font></h5><font color="#666600">
</font><p class="MsoBodyText"><font color="#666600">Fraction of incident solar radiation that is transmitted by 
the shading surface. The default value is 0.0, which means the surface is 
opaque. A value greater than 0.0 represents a device that passes some solar 
radiation, such as a tree, lattice, or fabric. Using SHADE-SCHEDULE allows 
seasonal variation in transmittance. Daylighting calculation assumes 
TRANSMITTANCE = 0.</font></p></div><div> </div><div>The design team quite find it hard to believe that the louvers have very minimal effect. I told them to consider the window to wall ratio (almost 60%) and that fact that they will be using a clear glass, even with these louvers partial UV rays still pass through the gaps that spreads allover the glass surface that adds to the heat load for air conditioning. Ive noticed to some of my other projects in tropical countries, building shades don't have much effect to energy efficiency. Did anyone encounter the same result with building shades? </div>
<div> </div><div> </div><div>Thanks,</div><div> </div><div>Bob</div>