<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40"><head><meta http-equiv=Content-Type content="text/html; charset=us-ascii"><meta name=Generator content="Microsoft Word 14 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
        {font-family:Calibri;
        panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
        {font-family:Tahoma;
        panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
        {font-family:Consolas;
        panose-1:2 11 6 9 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
        {margin:0in;
        margin-bottom:.0001pt;
        font-size:12.0pt;
        font-family:"Times New Roman","serif";
        color:black;}
a:link, span.MsoHyperlink
        {mso-style-priority:99;
        color:blue;
        text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
        {mso-style-priority:99;
        color:purple;
        text-decoration:underline;}
p
        {mso-style-priority:99;
        mso-margin-top-alt:auto;
        margin-right:0in;
        mso-margin-bottom-alt:auto;
        margin-left:0in;
        font-size:12.0pt;
        font-family:"Times New Roman","serif";
        color:black;}
pre
        {mso-style-priority:99;
        mso-style-link:"HTML Preformatted Char";
        margin:0in;
        margin-bottom:.0001pt;
        font-size:10.0pt;
        font-family:"Courier New";
        color:black;}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
        {mso-style-priority:99;
        mso-style-link:"Balloon Text Char";
        margin:0in;
        margin-bottom:.0001pt;
        font-size:8.0pt;
        font-family:"Tahoma","sans-serif";
        color:black;}
span.mark
        {mso-style-name:mark;}
span.EmailStyle19
        {mso-style-type:personal;
        font-family:"Calibri","sans-serif";
        color:#1F497D;
        font-weight:normal;
        font-style:normal;
        text-decoration:none none;}
span.HTMLPreformattedChar
        {mso-style-name:"HTML Preformatted Char";
        mso-style-priority:99;
        mso-style-link:"HTML Preformatted";
        font-family:Consolas;
        color:black;}
span.BalloonTextChar
        {mso-style-name:"Balloon Text Char";
        mso-style-priority:99;
        mso-style-link:"Balloon Text";
        font-family:"Tahoma","sans-serif";
        color:black;}
span.EmailStyle24
        {mso-style-type:personal-reply;
        font-family:"Calibri","sans-serif";
        color:#1F497D;}
.MsoChpDefault
        {mso-style-type:export-only;
        font-size:10.0pt;}
@page WordSection1
        {size:8.5in 11.0in;
        margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
        {page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]--></head><body bgcolor=white lang=EN-US link=blue vlink=purple><div class=WordSection1><p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>I agree with Patrick that building-wide LPD should never be used for the proposed design. In the simulation, the lighting power density is always coupled with a schedule, thus improving lighting that is on 24/7 should result in higher kWh savings than equivalent improvement to lighting that is on for just a few hours a day. Using uniform building-wide LPD in the proposed design makes even less sense for projects that have daylighting. We never use building area method for the baseline model either, which is an easy way to avoid review comments like the one that Oscar got. Building area method makes sense for prescriptive compliance with 90.1, but it is surprising that it made its way into Appendix G.<o:p></o:p></span></p><p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>Maria<o:p></o:p></span></p><p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p> </o:p></span></p><div><div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'><p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowtext'>From:</span></b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif";color:windowtext'> equest-users-bounces@lists.onebuilding.org [mailto:equest-users-bounces@lists.onebuilding.org] <b>On Behalf Of </b>Patrick J. O'Leary, Jr.<br><b>Sent:</b> Tuesday, May 22, 2012 5:49 PM<br><b>To:</b> Sami, Vikram<br><b>Cc:</b> eQuest Users; Oscar B.<br><b>Subject:</b> Re: [Equest-users] Building area method ASHRAE 90.1<o:p></o:p></span></p></div></div><p class=MsoNormal><o:p> </o:p></p><p class=MsoNormal>as long as a lighting system has been designed:<br><br>according to ashrae/appendix g the uniform/whole building method applies a uniform lpd to the BASELINE building only while the PROPOSED uses what is designed - so long as the design is based on the whole building area method.  the lpd of the PROPOSED design should not be applied uniformly to the PROPOSED building simulation.  <br><br>see appendix g, table g3.1, section 6 lighting, subsection b, page 173 (2004), page 179 (2007).  user's manual pages g-17/18 (2004 & 2007)<br><br>i would suggest to quote table g3.1 when replying to the reviewer's comment.  i have had reviewer's tell me i have to use the space-by-space method in a simulation for both proposed and baseline buildings.  this is not correct.  what is correct is that the simulation reflect the methodology used by the lighting designer.  if the lighting design is based on the whole building method then the whole building method maximum lpd is used in the BASELINE building.  if the design is based on the space-by-space method then the space-by-space maximum lpd for each space type is used in the BASELINE building.  in either case the PROPOSED building should reflect what is designed.  by 'what is designed' i mean look at the lighting plans, lighting schedules, and enter the lpd for each space/zone (thermal block) based on the number of fixtures, watts per fixture, and square feet of space.<br><br><br><br>On 5/22/12 2:15 PM, Sami, Vikram wrote: <o:p></o:p></p><p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>The building area method applies a uniform LPD to the entire building. If you do that in your baseline, you need to apply a uniform LPD to you proposed building too. </span><o:p></o:p></p><p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>In general, I don’t recommend using the building are method – the space by space method is a better approach. </span><o:p></o:p></p><p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><o:p></o:p></p><div><p class=MsoNormal style='text-autospace:none'><b><span style='font-size:10.0pt;font-family:"Arial","sans-serif";color:#DCAA2C'> </span></b><o:p></o:p></p><p class=MsoNormal style='text-autospace:none'><b><span style='font-size:9.0pt;font-family:"Arial","sans-serif";color:gray'>Vikram Sami</span></b><span style='font-size:9.0pt;font-family:"Arial","sans-serif";color:gray'>, LEED AP BD+C</span><o:p></o:p></p><p class=MsoNormal style='text-autospace:none'><span style='font-size:9.0pt;font-family:"Arial","sans-serif";color:gray'>Sustainable Design Analyst</span><o:p></o:p></p><p class=MsoNormal style='text-autospace:none'><span style='font-size:9.0pt;font-family:"Arial","sans-serif";color:gray'>1315 Peachtree St. NE, Atlanta, GA 30309</span><o:p></o:p></p><p class=MsoNormal style='text-autospace:none'><span style='font-size:9.0pt;font-family:"Arial","sans-serif";color:gray'>t: 404-443-7462    f: </span><span lang=ES style='font-size:9.0pt;font-family:"Arial","sans-serif";color:gray'>404.892.5823   </span><span style='font-size:9.0pt;font-family:"Arial","sans-serif";color:gray'>    e: <a href="mailto:vikram.sami@perkinswill.com">vikram.sami@perkinswill.com</a>   </span><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><a href="http://www.perkinswill.com/"><span style='font-size:9.0pt;font-family:"Arial","sans-serif";color:gray;text-decoration:none'>www.perkinswill.com</span></a></span><o:p></o:p></p><p class=MsoNormal style='margin-bottom:3.0pt;text-autospace:none'><b><span style='font-size:9.0pt;font-family:"Arial","sans-serif";color:gray'>Perkins+Will.</span></b><span style='font-size:9.0pt;font-family:"Arial","sans-serif";color:gray'>  </span><span style='font-size:9.0pt;font-family:"Arial","sans-serif";color:#ADD425'>Ideas + buildings that honor the broader goals of society</span><o:p></o:p></p><p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><o:p></o:p></p></div><p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'> </span><o:p></o:p></p><div><div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'><p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> <a href="mailto:equest-users-bounces@lists.onebuilding.org">equest-users-bounces@lists.onebuilding.org</a> [<a href="mailto:equest-users-bounces@lists.onebuilding.org">mailto:equest-users-bounces@lists.onebuilding.org</a>] <b>On Behalf Of </b>Oscar B.<br><b>Sent:</b> Tuesday, May 22, 2012 4:38 PM<br><b>To:</b> eQuest Users<br><b>Subject:</b> [Equest-users] Building area method ASHRAE 90.1</span><o:p></o:p></p></div></div><p class=MsoNormal> <o:p></o:p></p><div><p class=MsoNormal style='margin-bottom:12.0pt'><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> </span><o:p></o:p></p><div><p class=MsoNormal><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> </span><o:p></o:p></p><p class=MsoNormal><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>How does the building area method work?</span><o:p></o:p></p><p class=MsoNormal id="yui_3_2_0_20_1337697656927248"><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> </span><o:p></o:p></p><p class=MsoNormal id="yui_3_2_0_20_1337697656927251"><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>I just got a comment from the review team for a project pursuing LEED certification.</span><o:p></o:p></p><p class=MsoNormal id="yui_3_2_0_20_1337697656927254"><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> </span><o:p></o:p></p><p class=MsoNormal id="yui_3_2_0_20_1337697656927257"><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>I used the building area method for the baseline case and in the proposed case I put the <span class=mark>LPD</span> from the lighting design. However they told me that the same method has to be used in both cases.</span><o:p></o:p></p><p class=MsoNormal id="yui_3_2_0_20_1337697656927260"><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> </span><o:p></o:p></p><p class=MsoNormal id="yui_3_2_0_20_1337697656927263"><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>Any help would be appreciate.</span><o:p></o:p></p></div></div><p class=MsoNormal><br><br><br><o:p></o:p></p><pre>_______________________________________________<o:p></o:p></pre><pre>Equest-users mailing list<o:p></o:p></pre><pre><a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><o:p></o:p></pre><pre>To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><o:p></o:p></pre><p class=MsoNormal><o:p> </o:p></p></div></body></html>