<html>
  <head>
    <meta content="text/html; charset=GB2312" http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    <tt>I just realized I spelled Nick's name wrong, it is Caton.  Don't
      search by author though, you will get way too many unrelated
      discussions.  Do a subject search and then look for Nick's name,
      he is always in the thick of things.  Pay attention to the names
      of some of the other pro's in the discussions, it will help you
      later on in other searches.  Nick especially, and a few others too
      do some very nice illustrated how to tutorials in the discussions.</tt><br>
    Here is the link again:
    <a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/">http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/</a>
    <br>
    It is always good to post to the group so we build the archive and
    keep it pertinent.  Also others will jump in with help as well. 
    Bill Bishop did today on another discussion I was having on
    "Removing unmet heating hours".  You might want to look at that one
    too, that will answer your next questions.  Bill's addition was very
    good on a part I had just glossed over.<br>
    Bruce<br>
    <br>
    On 11/04/2012 02:48 PM, xiaoyang shi wrote:
    <blockquote
cite="mid:CAHVKLyoEor+styZfQr9THvQO-hZQm_aCQtZ0OFPkACpzHUEOWg@mail.gmail.com"
      type="cite">Thank you very much, Bruce.
      <div><br>
      </div>
      <div>Would you mind I ask what "the archives" is?  You mean you
        attached file for me ? or the eQUEST three help documents?</div>
      <div><br>
      </div>
      <div>Thank you again.</div>
      <div><br>
      </div>
      <div>Yang<br>
        <br>
        <div class="gmail_quote">On Wed, Apr 11, 2012 at 9:08 AM, Bruce
          Easterbrook <span dir="ltr"><<a moz-do-not-send="true"
              href="mailto:bruce5@bellnet.ca">bruce5@bellnet.ca</a>></span>
          wrote:<br>
          <blockquote class="gmail_quote" style="margin:0 0 0
            .8ex;border-left:1px #ccc solid;padding-left:1ex">
            <div bgcolor="#FFFFFF" text="#000000"> <font size="+1"><tt>It
                  is the way the program runs and is written.  eQuest is
                  a program which will handle pretty much any building
                  that can be conceived.  This does require some
                  adjustments to be done by the program operator to make
                  the program conform to what you are doing with it.  In
                  your case you want to delete the roofs which aren't
                  roofs.  Be careful, you still need a floor and you
                  also need eQuest to recognize the 2 thermal spaces are
                  adjacent to each other.  All that you need is in the
                  program.  My time is too short to do a full walk
                  through but there is many examples in the archives.  I
                  believe Nick Canton did a very nice run explanation on
                  this.<br>
                  One handy benefit of this is when you have a building
                  that has floors which don't line up, ie partial
                  roofs.  It is easier to put the roof in and then
                  delete the parts you don't need later.  Lol, not quite
                  as easy and clean as that but you get the drift.  That
                  is in the archives too.<br>
                  Everyone has to remember computers and software have
                  zero intelligence, they are as dumb as a post.  What
                  makes them useful is the skill of the operator. 
                  eQuest takes a huge amount of skill to operate.  As
                  the eQuest basher said yesterday it can be deceptively
                  simple.  It is not, you have to check everything to
                  make sure it is configured to match your model and
                  that you haven't made an error that is giving you bad
                  results.  If you put crap in you are going to get crap
                  out.<br>
                </tt></font><font size="+1"><tt>Bruce Easterbrook P.Eng.<br>
                  Abode Engineering</tt></font>
              <div class="im"><br>
                <br>
                On 11/04/2012 01:23 AM, xiaoyang shi wrote: </div>
              <blockquote type="cite">
                <div class="im">
                  <div>Hi everyone,</div>
                  <div><br>
                  </div>
                  <div>When I build a model as a whole shell, say 5
                    floor, the simulate results show: only the top floor
                    roof is the whole building roof.</div>
                  <div><br>
                  </div>
                  <div>But if I build this 5 floor building one floor by
                    one floor, setting like:
                    "position this shell: immediately above", the
                    results show: every floor surface adds together is
                    the whole building roof.</div>
                  <div><br>
                  </div>
                  <div>So, the amount of heat loss from the roof will be
                    different.</div>
                  <div><br>
                  </div>
                  <div>Could anybody tell me the reason?</div>
                  <div><br>
                  </div>
                  <div>Thank you.</div>
                  <div><br>
                  </div>
                  <div>Best,</div>
                  <div>yang</div>
                  <div><br>
                  </div>
                  <div><br>
                  </div>
                </div>
                <div> 学长,有个东西请教下呀。<br>
                  我一起建一个5层的大楼模型的时候,只有顶层哪个是roof。<br>
                  <br>
                  但是这次,我一层一层建的,就是第一个界面上设置
                  position this shell: immediately above, 因
                  为每层room plan不一样。最后结果显示,每一层的的roof加在一块是整个roof。 <br>
                  <br>
                  我觉得equest把每层的这个roof热损失都算进去了,这样子是不正确的吧。<br>
                  怎么回事呀?<br>
                  <br>
                  谢谢学长。 </div>
                <br>
                <fieldset></fieldset>
                <br>
                <div class="im">
                  <pre>_______________________________________________
Equest-users mailing list
<a moz-do-not-send="true" href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send  a blank message to <a moz-do-not-send="true" href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
                </div>
              </blockquote>
            </div>
          </blockquote>
        </div>
        <br>
      </div>
    </blockquote>
  </body>
</html>