<html>
  <head>
    <meta content="text/html; charset=ISO-8859-1"
      http-equiv="Content-Type">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    <font size="+1"><tt>It is the way the program runs and is written. 
        eQuest is a program which will handle pretty much any building
        that can be conceived.  This does require some adjustments to be
        done by the program operator to make the program conform to what
        you are doing with it.  In your case you want to delete the
        roofs which aren't roofs.  Be careful, you still need a floor
        and you also need eQuest to recognize the 2 thermal spaces are
        adjacent to each other.  All that you need is in the program. 
        My time is too short to do a full walk through but there is many
        examples in the archives.  I believe Nick Canton did a very nice
        run explanation on this.<br>
        One handy benefit of this is when you have a building that has
        floors which don't line up, ie partial roofs.  It is easier to
        put the roof in and then delete the parts you don't need later. 
        Lol, not quite as easy and clean as that but you get the drift. 
        That is in the archives too.<br>
        Everyone has to remember computers and software have zero
        intelligence, they are as dumb as a post.  What makes them
        useful is the skill of the operator.  eQuest takes a huge amount
        of skill to operate.  As the eQuest basher said yesterday it can
        be deceptively simple.  It is not, you have to check everything
        to make sure it is configured to match your model and that you
        haven't made an error that is giving you bad results.  If you
        put crap in you are going to get crap out.<br>
      </tt></font><font size="+1"><tt>Bruce Easterbrook P.Eng.<br>
        Abode Engineering</tt></font><br>
    <br>
    On 11/04/2012 01:23 AM, xiaoyang shi wrote:
    <blockquote
cite="mid:CAHVKLyqDDaD3NdPiu8jz7Xi0kq3FMux-WJBX+_Zn-YX_iP802Q@mail.gmail.com"
      type="cite">
      <div>Hi everyone,</div>
      <div><br>
      </div>
      <div>When I build a model as a whole shell, say 5 floor, the
        simulate results show: only the top floor roof is the whole
        building roof.</div>
      <div><br>
      </div>
      <div>But if I build this 5 floor building one floor by one floor,
        setting like: "position this shell: immediately above", the
        results show: every floor surface adds together is the whole
        building roof.</div>
      <div><br>
      </div>
      <div>So, the amount of heat loss from the roof will be different.</div>
      <div><br>
      </div>
      <div>Could anybody tell me the reason?</div>
      <div><br>
      </div>
      <div>Thank you.</div>
      <div><br>
      </div>
      <div>Best,</div>
      <div>yang</div>
      <div><br>
      </div>
      <div><br>
      </div>
      <div> 学长,有个东西请教下呀。<br>
        我一起建一个5层的大楼模型的时候,只有顶层哪个是roof。<br>
        <br>
        但是这次,我一层一层建的,就是第一个界面上设置position this shell: immediately above, 因
        为每层room plan不一样。最后结果显示,每一层的的roof加在一块是整个roof。 <br>
        <br>
        我觉得equest把每层的这个roof热损失都算进去了,这样子是不正确的吧。<br>
        怎么回事呀?<br>
        <br>
        谢谢学长。 </div>
      <br>
      <fieldset class="mimeAttachmentHeader"></fieldset>
      <br>
      <pre wrap="">_______________________________________________
Equest-users mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send  a blank message to <a class="moz-txt-link-abbreviated" href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
    </blockquote>
  </body>
</html>