<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
<font size="+1"><tt>I have run into this, not in parametric runs,
but when I do a lot of changes. I have found that saving the
file and exiting eQuest, reopening and then running the
simulation stops the freezing. It also stops losing a lot of
work. Sometimes you just lose the changes, sometimes the whole
file is corrupted. <u>Always</u> keep an independent backup
just in case.<br>
Bruce Easterbrook P.Eng.<br>
Abode Engineering<br>
</tt></font><br>
On 26/03/2012 11:37 AM, <a class="moz-txt-link-abbreviated" href="mailto:atowell@cxegroup.com">atowell@cxegroup.com</a> wrote:
<blockquote
cite="mid:11CFD2AEFF72D842BB23C529D3E1038F3FE6797A30@P3PW5EX1MB01.EX1.SECURESERVER.NET"
type="cite">
<pre wrap="">Dane-
I've run into this also, but I don't really have a solution, just a workaround. I try not to put too many data modifications onto one parametric component. If I start to get a lot of changes, I just create another component for the rest of my modifications.
Adam E. Towell
CxE Group LLC
CONSULTING ENGINEERS
Your Independent, Third-Party Commissioning Authority.
20 Edwardsville Professional Park, Suite A
Edwardsville, Illinois 62025-3602
PHONE: 618.659.9461
FAX: 618.659.9589
EMAIL: <a class="moz-txt-link-abbreviated" href="mailto:atowell@cxegroup.com">atowell@cxegroup.com</a>
-----Original Message-----
From: <a class="moz-txt-link-abbreviated" href="mailto:equest-users-bounces@lists.onebuilding.org">equest-users-bounces@lists.onebuilding.org</a> [<a class="moz-txt-link-freetext" href="mailto:equest-users-bounces@lists.onebuilding.org">mailto:equest-users-bounces@lists.onebuilding.org</a>] On Behalf Of Dane Heimerman
Sent: Monday, March 26, 2012 10:10 AM
To: <a class="moz-txt-link-abbreviated" href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>
Subject: [Equest-users] Parametric Window Freezes
Anybody else run into the issue when you're in the parametric run dialogue box, if you add too many rows under "Data Modifications:", that the window/program will freeze up? Any time I add more than 7 modifications under a parametric component, my whole computer freezes, and I have to restart it. I've been able to work around it, but it adds time and frustration sometimes.
Thanks,
--
Dane Heimerman, EIT
HVAC Engineer
Michael L. Norris& Associates, Inc.
270 Walker Dr, Suite 201B
State College, PA 16801
p:814.867.3823
f:814.867.4823
<a class="moz-txt-link-abbreviated" href="mailto:daneh@mlnai.com">daneh@mlnai.com</a>
_______________________________________________
Equest-users mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send a blank message to <a class="moz-txt-link-abbreviated" href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
_______________________________________________
Equest-users mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send a blank message to <a class="moz-txt-link-abbreviated" href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
</blockquote>
</body>
</html>