<BODY onload=parent.init() contentEditable=true>Robby: This project is being done by an architect who used DD. I looked for the error in CHW plant and forgot to look at HVAC supply temps. I was mistaken, the Detailed Edit does allow you to set CHWS temp but not SD and DD. Varkie<BR><BR><BR>
<P></P><B>----- Original Message -----</B>
<P></P><B>From</B>: Robby Oylear <robbyoylear@gmail.com>
<P></P><B>Date</B>: Thursday, December 15, 2011 4:29 pm
<P></P><B>Subject</B>: Re: RE: [Equest-users] CHW error message
<P></P>
<P></P>> Whoops, here's the image I meant to send with the detailed edit <BR>> screen:[image: image.png] <BR>> <BR>> On Thu, Dec 15, 2011 at 2:29 PM, Robby Oylear <BR>> <robbyoylear@gmail.com> wrote: <BR>> <BR>> > Varkie, <BR>> > <BR>> > On wizard screen 3 of 3 under "CHW Plant Equipment" the setpoint is <BR>> > defined. The default is 44 deg F. <BR>> > <BR>> > [image: image.png] <BR>> > <BR>> > In detailed edit mode this setpoint can be seen on the <BR>> "Circulation Loop <BR>> > Properties" screen: <BR>> > [image: image.png] <BR>> > <BR>> > On Thu, Dec 15, 2011 at 2:22 PM, Varkie C Thomas <BR>> <thomasv@iit.edu> wrote: <BR>> > <BR>> >> Kelsey, Robby, <BR>> >> <BR>> >> Thanks. The supply air temp was too low. What CHWS temp does <BR>> eQUEST>> assume? This should be an input value too, besides temp <BR>
> rise.>> <BR>> >> Varkie <BR>> >> ** <BR></BODY>