<font color='black' size='2' face='Arial, Helvetica, sans-serif'><font size="2" color="black" face="Arial, Helvetica, sans-serif">Hello Everyone,<br>
<br>
I am modeling very large office building, which is having central plant with chillers and heat exchangers. The heat exchangers provide hot water to the 2-pipe loop via two pumps, while the chillers provide chilled water to 2-pipe loop via four chilled water pump. The 2-pipe distribution supplies chilled and hot water to the AHUs and FCUs located different zones in the entire facility.<br>
<br>
The 2- pipe distribution system have no pump. The loop operates year around based on heating and cooling requirement. Since, there is no pump in 2-pipe distribution system, it uses primary loop pumps (Chilled water pumps in summer and hot water pump in winter). </font><br>
<font size="2" color="black" face="Arial, Helvetica, sans-serif"><br>
Is there anyway i can model two primary loops and one secondary loop (2-pipe) in the eQUEST?<br>
<br>
Thanks,<br>
<br>
Vipul<br>

</font></font>