<div>Hello,</div><div>I am becoming concerned with how much better my geothermal Heat Pump modeled as PVVT (with geo HP under heating cooling respectively) are performing over the Ashrae Baseline required system 4 (Packaged Single Zone HP).  I am approaching the 40-50% mark.  I understand that the geothermal system should be appreciably less in energy consumption since there is little energy spent on the heat sink other than pumps.</div>
<div> </div><div>Both were specified by Equest through wizard selection, but the PVVT Geo HP system was confirmed to be the best selection for a multizone system in a Equest users response.</div><div> </div><div>Am I correct in thinking that the Single Zone HP are incorrectly duplicating themselves for each zone serviced?  Therefore, increasing the energy consumption.  Whereas, each PVVT system can service multiple zones. </div>
<div> </div><div>Should I use the PVVT system for the baseline and modify it to simulate a PSZ-HP?</div><div> </div><div>Thanks for any help.</div>