<div>Hello,</div><div> </div><div>I am having some issues on a EPAct project with HVAC Equipment.  The Quality Check Details states that My CFM/ton of Cooling is high at around 750cfm/ton.  I have entered the exact design flows/ sizes of the heat pumps as indicated in the mechanical schedules, but something seems to be short circuiting the heating/ cooling relationship.  Should I discard the actual supply flow rate?  I guess the real question stems from the fact that when I increase the sizing of the system above 1.0 to ~1.25, the heating actually gets worse.  Same thing with specifying airflow zone by zone.  At this point, it seems that there is something obvious I am overlooking.</div>
<div> </div><div>thanks,</div><div>nic</div>