<div>For the VFD to take effect, the cooling coil valve has to be two-way. Default in eQuest is three-way. See if that is the issue.</div><div>-Rohini<br><br></div><div class="gmail_quote">On Mon, Oct 10, 2011 at 6:20 PM, Kazim Mirza <span dir="ltr"><<a href="mailto:mirzkazim9@gmail.com">mirzkazim9@gmail.com</a>></span> wrote:<br>
<blockquote style="margin: 0px 0px 0px 0.8ex; padding-left: 1ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid;" class="gmail_quote"><div>Hello All,</div>
<div>             Here is a "sim" output from the hospital bldg I am modelling. The secondary CHW pump has a VFD on it and I would think that the flow would be proportional to speed and the pump would spent some time in the lower load ranges rather being in > 80% load range. </div>


<div> </div>
<div>(<em>Although I do not know as to how eQUEST comes up with the speed to match with flows - my presumption being that the flows are being derived from the loads and delta-T. The constant speed pumps cycles on and off to get deliver the load and VFD equipped pump varies the speed of the pump to regulate the flow to satisfy the load</em>)</div>


<div> </div>
<div>Why is the speed hours not consistent with the flow hours? I am also not limiting the speed of the pump in any way to below 80% range.</div>
<div> </div>
<div>Please advise.</div>
<div> </div>
<div>Thanks in Advance,</div>
<div>Kazim Mirza</div><font color="#888888">
<div>Energy Engineer</div>
<div>EMCOR Energy Services</div>
</font><br>_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br>