Hi everyone,<br><br>I feel that this topic must have been discussed at some point, but an exhaustive archive search got me nowhere, so I thought I'd throw together a post of my own, especially since I'm working on an eQuest model of a small server building which is heated in part by a large number of computers that run many hours every day.<br>
<br>I'm interested in how eQuest treats electric loads - from lights, computers, refrigerators, etc - as regards space heating.  I had always assumed that, especially in the case of lights, much of the energy used would be converted to heat within the building, and contribute to space heating.<br clear="all">
<br>However, I set up an experiment to test this and found that the results were far different from what I'd expected: I upped the lighting density in an existing natural-gas-heated building model by about 15x and compared the electric use from before and after the lights were increased.  I converted all values to mmBtus for easy comparison.  To my surprise, I found that only a very small fraction (about 6%) of the mmBtus added to the building through those lights contributed to space heat.  The kWh recorded were increased hugely, but the heating energy required to keep the building heated was almost the same in both cases.<br>
<br>I repeated the experiment, upping misc. equipment instead of lighting, and saw a similar result.<br><br>Does anyone have any knowledge of what equations eQuest uses to decide how much electrical energy use is converted to heat and added to the space in which it is installed?<br>
<br>Regards,<br>Taylor Sharpe<br>Sharpe Energy Solutions<br><a href="mailto:newspectrum@gmail.com" target="_blank">newspectrum@gmail.com</a><br>(541-840-5698)<br><br>