<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=us-ascii" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.19120"></HEAD>
<BODY>
<DIV><SPAN class=205335516-13092011><FONT size=2 face=Arial>Trying to model a 
reversible chiller scenario.  Any help is appreciated.</FONT></SPAN></DIV>
<DIV><SPAN class=205335516-13092011><FONT size=2 
face=Arial></FONT></SPAN> </DIV>
<DIV><SPAN class=205335516-13092011><FONT size=2 face=Arial>Will have (2) 
chillers - 1 dedicated for a CHW loop on load side and the other for a HW loop 
on the load side.  The chillers will be piped into a vertical well 
ground loop for the condenser side.</FONT></SPAN></DIV>
<DIV><SPAN class=205335516-13092011><FONT size=2 
face=Arial></FONT></SPAN> </DIV>
<DIV><SPAN class=205335516-13092011><FONT size=2 face=Arial>The CHW 
loop will serve a few small CHW coils in single zone 
AHUs.  </FONT></SPAN></DIV>
<DIV><SPAN class=205335516-13092011><FONT size=2 
face=Arial></FONT></SPAN> </DIV>
<DIV><SPAN class=205335516-13092011><FONT size=2 face=Arial>The HW loop will 
serve the HW coils in the same AHUs, but also a HW radiant slab 
heating system and several heat recovery units (heating only).  The HW 
chiller is meant to serve as a preheater to the HW loop as the temp will peter 
out at 130 (max), while any remaining heat would be provided by a set of 
condensing boilers that will maintain the HW loop at 150.  
</FONT></SPAN></DIV>
<DIV><SPAN class=205335516-13092011><FONT size=2 
face=Arial></FONT></SPAN> </DIV>
<DIV><SPAN class=205335516-13092011><FONT size=2 face=Arial>I've set up a loop 
to loop heat pump with the condenser loop to the lake/well option, attached to 
the CHW loop and attached to the HW loop.  It runs with fatal errors and 
brings me back to the input screens.  </FONT></SPAN></DIV>
<DIV><SPAN class=205335516-13092011><FONT size=2 
face=Arial></FONT></SPAN> </DIV>
<DIV><SPAN class=205335516-13092011><FONT size=2 
face=Arial>Thoughts?</FONT></SPAN></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><SPAN class=205335516-13092011><FONT size=2 
face=Arial>Eric</FONT></SPAN></DIV></BODY></HTML>