<div>Hello All,</div>
<div> </div>
<div>I am trying to establish the baseline model for LEED NC 3.0, and have some problem as following:</div>
<div> </div>
<div>1. From ASHRAE 90.1 2007  G3.1.2.8, does it mean that I can simulation the supply airflow rate by </div>
<div>    setting MIN-SUPPLY-T & DESIGN-COOL-T have 20 degree difference and let eQUEST to calculate the </div>
<div>    supply airflow automatically?</div>
<div>2. My baseline HVAC is system No.8, VAV with PFP boxes, so from G3.1.3.12, the supply air temperature reset must depend on the load, but I can't find this setting option in eQUEST, could anybody tell me how to set that?</div>

<div>3.Because I am not in a LEED project, could anyone send me the LEED NC3.0 "EAp2 Section 1.4 table.xls" to check if there is anything I loss?</div>
<div> </div>
<div> </div>
<div>Thanks in advance, </div>
<div> </div>
<div> </div>
<div>Stan Ho</div>