I would check first if a climatic zone has been defined. You can check this at the "project and site" screen, at the site data option. That's how I solved it when I got that same error.<br />
<br />
Good Luck!<br />
<br />
Quoting Astrance eQuest <astrance.equest@gmail.com>:<br />
<br />
> Hi All,<br />
><br />
><br />
><br />
> I'm new at eQuest.<br />
><br />
><br />
><br />
> I modelized a building and when I did the compliance analysis for LEED I get<br />
> this error:<br />
><br />
> "Error : Table look-up failed: A901-07_Envelope(1,4) evaluating rule:<br />
> Look-up and default C-FFACTOR for slabs"<br />
><br />
><br />
><br />
> Does somebody know what it means and how can I solve this problem ?<br />
><br />
><br />
><br />
> Thank you for your help,<br />
><br />
> Jb<br />
><br />
><br />
><br />
><br />
<p> </p>
<p class="imp-signature"><!--begin_signature-->Federico Steinvorth<br />
Master's Student, Construction Management<br />
School of Planning, Design, and Construction<br />
Michigan State University<!--end_signature--></p>