<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
are you trying to show the cooling benefit of the windows? or just
comparing the evap cooler to a baseline packaged unit?<br>
<br>
i've done this with fire stations, and been successful, but it is often
more in the ventilation savings from not running a compressor in the
evap system than the building envelopes themselves. at least in my
experience. there is also the trade off in the simulation though that
the evap cooler will have probably have a larger fan power (in reality)
than the baseline packaged unit.<br>
<br>
and if a leed project don't forget the baseline outside air is the
minimum required, which will probably be lower than your evap even if
it is not a 100% outdoor air system.<br>
<br>
On 8/16/11 11:35 AM, deepika khowal wrote:
<blockquote
cite="mid:CAHKrw7UPyqgWm7Du6AKuysWTRvvA0SCMfQ1f6AUdPBSFEwQ4tA@mail.gmail.com"
type="cite">Hello all
<div>I am modeling a building in Bridgeport, CA which has evaporative
coolers.</div>
<div>I dont see any benefits if I replace existing clear glass with
low-e in cooling energy consumption.</div>
<div>Did anyone model evaporative coolers/swamp coolers before?</div>
<div>I want to know whether there is a way to show cooling benefit
with such HVAC system.</div>
<div>Thanks</div>
<div>Regards</div>
<div>Deepika</div>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_______________________________________________
Equest-users mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send a blank message to <a class="moz-txt-link-abbreviated" href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
</blockquote>
<br>
</body>
</html>