<div>Hi all !</div>
<div> </div>
<div>Can somebody help me here? :)</div>
<div> </div>
<div>As I choose "VAV with reheat" system in Wizard mode, it generates Reheat elements in </div>
<div> </div>
<div>Detailed mode.  But now I was informed that the system doesn't have reheat. </div>
<div> </div>
<div>So, I put "Not Installed" in Zone Heat Source and blanked Reheat Delta T.</div>
<div> </div>
<div>Then, I installed Main heating coil and input "Hot Deck Max Leaving Temp."</div>
<div> </div>
<div>But, as the system is single-zone VAV, "Heat Control" box is not modifiable. That means setting "Hot Deck Max Leaving Temp" doesn't do any good.</div>
<div> </div>
<div>Should I force the "Heat Control" to be "Constant" through Editing User Default?   </div>
<div> </div>
<div>And, above steps will make my main heating coil work reasonably?</div>
<div> </div>
<div>Thank you in advance.</div>
<div> </div>
<div>DE</div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>
<div> </div>