Leave it to Bill and Bruce to give you great answers. Bruce, you are so spot on about the equipment sizing. If LEED buildings don't "live up to their promise" I would start looking for the cause right there. <br>
<br>I keep thinking that a specification section for LEED compliance might help. Similar to the Building Commissioning one, in that there's a single place to put all the requirements of the task so people don't have to search 00800 and the 16440 and then xxxxxx in order to be sure you have seen all that's spec'd.<br>
<br>Aru, I remember when using a system that had baseboard heating, or some system with no heating fan, that I was unable to apply the heating oversize in the air handler. I could oversize the cooling, just not the heating. In that case I applied the oversize to the boiler and let er rip. The model output seemed reasonable.<br>
<br>Carol<br><br><div class="gmail_quote">2011/7/26 Arunabha Sau <span dir="ltr"><<a href="mailto:runabha@gmail.com">runabha@gmail.com</a>></span><br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
<font face="tahoma,sans-serif">Thanks Bill. Awesome clarification. I appreciate your time.<br></font><div><div><font face="tahoma, sans-serif">So I was wondering, if you oversize the Plant does the AHU get oversized too by default, in eQuest?</font></div>

<div><font face="tahoma, sans-serif">Any thoughts?</font></div><div><font face="tahoma, sans-serif"><br></font></div><div><font face="tahoma, sans-serif"><br>
</font></div><div><font face="tahoma, sans-serif">Much thanks,</font></div><div><font face="tahoma, sans-serif">Aru</font></div><div><font face="tahoma, sans-serif"><br>
</font></div><div><font face="tahoma, sans-serif"><br></font><div class="gmail_quote">2011/7/26 Bishop, Bill <span dir="ltr"><<a href="mailto:wbishop@pathfinder-ea.com" target="_blank">wbishop@pathfinder-ea.com</a>></span><div>
<div></div><div class="h5"><br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div link="blue" vlink="purple" lang="EN-US"><div><p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D">Aru,<u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D">I don’t think the intention of G3.1.2.2 is met by oversizing only the plant and not the systems. The 90.1 User’s Manual does not specify what is to be oversized either, although it does describe a chiller when discussing the differences in equipment sizing between the ECB and PRM:<u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D">“For instance, if a chiller in the proposed building is 50% oversized, then the chiller in the budget building is also 50% oversized. However with the building performance rating method, equipment in the baseline building is oversized by a fixed amount in all cases.”<u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D">In eQUEST, setting the system Cool Sizing Ratio to 1.15 and Heat Sizing Ratio to 1.25 will also increase the autosized capacities of the plant. I believe this is how most Appendix G modelers (including myself) address the G3.1.2.2 requirement.<u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D">Note that you could also achieve the same cooling and heating capacity oversizing by setting the overall system Sizing Ratio to 1.15, the Cool Sizing ratio to 1.00 and the Heat Sizing Ratio to 1.087. (1.15x1.087—1.25). However, this oversizes the system airflow by 15%, and G3.1.2.8, which specifies how design airflow rates are determined, does not mention oversizing. I have had models where unmet heating/cooling hours could only be reduced sufficiently by increasing the system airflow as a last resort.<u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D">Regards,<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D">Bill<u></u><u></u></span></p>

<p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D"><img src="" alt="Senior Energy Engineer" height="116" width="486"><u></u><u></u></span></p>

<div><p class="MsoNormal"><span style="font-size:11.0pt;color:#1F497D"><u></u> <u></u></span></p><div style="border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in"><p class="MsoNormal"><b><span style="font-size:10.0pt">From:</span></b><span style="font-size:10.0pt"> <a href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a> [mailto:<a href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a>] <b>On Behalf Of </b>Arunabha Sau<br>

<b>Sent:</b> Monday, July 25, 2011 7:47 PM<br><b>To:</b> <a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a><br><b>Subject:</b> [Equest-users] Oversizing..AHU or Plant?<u></u><u></u></span></p>

</div><p class="MsoNormal"><u></u> <u></u></p></div><p class="MsoNormal"><span>Howdy!</span><u></u><u></u></p><div><div></div><div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p>

</div><div><p class="MsoNormal"><span>So, I just saw a project which has applied its oversizing factors (1.15 for cooling and 1.25 for heating) to the plant rather than the air handlers.  ASHRAE 90.1 Appendix G <span>page 180, G3.1.2.2 Equipment capacities  does not specify where the oversizing should occur.  Have you seen this method used before?  Is it an acceptable and accurate way of meeting the baseline modeling requirements?</span></span><u></u><u></u></p>

</div><div><p class="MsoNormal"><span><u></u> <u></u></span></p></div><div><p class="MsoNormal"><span>I appreciate your help.<u></u><u></u></span></p></div><div><p class="MsoNormal"><span><u></u> <u></u></span></p></div>
<div>
<p class="MsoNormal"><span><u></u> <u></u></span></p></div><div><p class="MsoNormal"><span><u></u> <u></u></span></p></div><div><p class="MsoNormal"><span><u></u> <u></u></span></p></div><div><p class="MsoNormal"><span>Much thanks,<u></u><u></u></span></p>

</div><div><p class="MsoNormal"><span>Aru<u></u><u></u></span></p></div></div></div></div></div></blockquote></div></div></div><br></div></div>
<br>_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br><br clear="all"><br>-- <br>Carol Gardner PE<br>
<div style="visibility: hidden; left: -5000px;" id="avg_ls_inline_popup"></div><style type="text/css">#avg_ls_inline_popup{position: absolute;z-index: 9999;padding: 0px 0px;margin-left: 0px;margin-top: 0px;overflow: hidden;word-wrap: break-word;color: black;font-size: 10px;text-align: left;line-height: 130%;}</style>