<div>Hello All,</div>
<div> </div>
<div>I am trying to set an air supply temperature of 75 deg F, but it seems that eQUEST will not allow me to set a temperature above 70 deg F.  The input that I am controlling is under the Air-Side Cooling Tab, titled "Zone Entering Min Supply Temp."</div>

<div> </div>
<div>Can anyone verify if this is correct that I cannot enter an air supply temperature higher than 70 deg F?</div>
<div> </div>
<div>Best,</div>
<div> </div>
<div>Patrick<br clear="all"><br>-- <br>Patrick J Keeney<br>MArch-MSSD Candidate<br>410-299-5627<br></div>