You might have already done it, did you set OA control to something other than fixed - also economizer is just at the system level, not space level.<br><br><div class="gmail_quote">On Tue, May 24, 2011 at 11:35 AM, Rob Hudson <span dir="ltr"><<a href="mailto:rdh4176@gmail.com">rdh4176@gmail.com</a>></span> wrote:<br>
<blockquote style="margin: 0px 0px 0px 0.8ex; padding-left: 1ex; border-left-color: rgb(204, 204, 204); border-left-width: 1px; border-left-style: solid;" class="gmail_quote">When trying to set up a space to have economizer mode using the schedule, i can't seem to make it work.  <div>
<br></div><div>When i enter the value 0.001 as requested by the help files, to enable economizer mode and let the unit go to 0% during the unoccupied periods, it doesn't work.</div>
<div><br></div><div>When i enter -999 as requested by the help files to allow my stated OA ratio to rule (33% in this case) it doesn't allow it to go to 100% OA and therefore i get unmet hours.</div><div><br></div><div>

If i set the value to 1 at all times, then i get 100% OA during the summer, which is not advised.</div><div><br></div><div>Any help is appreciated,</div><div><br>-- <br>Rob Hudson<br>
</div>
<br>_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br>