Hi everyone,<br><br>I have a question regarding eQuest's process for defining economic rates schedules.<br><br>We just finished modeling a building with electricity provided by Pacific Power, under Schedule 28.  Assuming eQuest was drawing on some database with up-to-date rates, we put a report together using two-page summary savings, only to find that the reported savings for a lighting EEM were roughly (but not exactly) half what we would expect.<br>
<br>After digging through DDE mode to identify rates schedules and blocks, we found that eQuest had populated the rates blocks entirely differently from the expected rates schedules provided by Pacific Power.<br><br>eQuest had split rates up into blocks whose $/unit values varied wildly; the first block was set up in such a way that the charges would accelerate slowly, and had a $/unit setpoint that seemed completely random.<br>
<br>The real question in my mind is this: where does eQuest find its rates schedules, and how up-to-date are they?  Of course an eQuest modeler should always check through rates schedules, but should we also always assume that only custom rates will reflect utilities' actual numbers?<br>
<br>Any insight into the issue would be very much appreciated.<br><br>Regards,<br>Taylor Sharpe<br>Sharpe Energy Solutions<br>