Thanks Joe<div>Even I realized the same thing. the total energy use in Energy plus was almost 50% less than equest.</div><div>If this is the case, who would you know that you model is working fine?<br><br><div class="gmail_quote">
On Wed, Apr 27, 2011 at 6:06 PM, Joe Huang <span dir="ltr"><<a href="mailto:yjhuang@whiteboxtechnologies.com">yjhuang@whiteboxtechnologies.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
I was involved in a two year project 2005-2007 to convert the Calif. Energy Commission's Title-24 certification suite of building tests from DOE-2.1E to EnergyPlus.  There are some areas where it's difficult to get comparable inputs due to differences or limitations in the models. The differences between the two programs varied a lot depending on the building, weather, and HVAC system. For the CEC certification suite of 160 runs, cooling results were more consistent, within 10% in most cases, with EnergyPlus almost always on the high side; for heating, the differences were much greater, sometimes with EnergyPlus being 40-60% lower than DOE-2.1E.  I have a 120-page report on this comparison, but haven't bothered to put it on the Web.<br>

<br>
Joe<br>
<br>
Joe Huang<br>
White Box Technologies, Inc.<br>
346 Rheem Blvd., Suite 108D<br>
Moraga CA 94556<br>
<a href="mailto:yjhuang@whiteboxtechnologies.com" target="_blank">yjhuang@whiteboxtechnologies.com</a><br>
<a href="http://www.whiteboxtechnologies.com" target="_blank">www.whiteboxtechnologies.com</a><br>
(o) <a href="tel:%28925%29388-0265" value="+19253880265" target="_blank">(925)388-0265</a><br>
(c) <a href="tel:%28510%29928-2683" value="+15109282683" target="_blank">(510)928-2683</a><br>
"building energy simulations at your fingertips"<br>
<br>
<br>
<br>
deepika khowal wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div></div><div class="h5">
HI All<br>
I am trying to create same model in equest and energy plus to see whether i see same results and just to validate my simulation files.<br>
has anyone done this before?<br>
I would like to know what is the % difference in both software outputs?<br>
Thanks<br>
Deepika<br></div></div>
------------------------------------------------------------------------<div class="im"><br>
<br>
_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
  <br>
</div></blockquote>
</blockquote></div><br></div>