Does only those two spaces have 8 foot ceilings or the whole building? <div><br></div><div>When you utilize the design wizard you can specify a floor to ceiling height and a floor to floor height.  I would use this and input 8 and 25 ft respectively.  Then if some of the spaces span the whole 25 ft, i would leave wizard mode and enter design mode and delete the plenum spaces and change the heights of the rooms to be 25 ft.  it is much easier to delete than create once you get to the design mode.  </div>
<div><br></div><div>Hope this helps.<br><br><div class="gmail_quote">On Wed, Apr 13, 2011 at 5:11 PM, BLafley <span dir="ltr"><<a href="mailto:BLafley@cetonline.org">BLafley@cetonline.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
Hello,<br>
<br>
I am modeling a 1 story retail/warehouse space that has a 25 foot ceiling.  How do I put an office and a restroom space that have 8 foot ceilings?<br>
<br>
Thanks for any assistance,<br>
-- <br>
Bill Lafley<br>
Energy Analyst<br>
Center for Ecological Technology (CET)<br>
320 Riverside Drive - 1A Florence, MA 01062<br>
<a href="mailto:blafley@cetonline.org" target="_blank">blafley@cetonline.org</a> <mailto:<a href="mailto:blafley@cetonline.org" target="_blank">blafley@cetonline.org</a>> / <a href="tel:413-586-7350" value="+14135867350" target="_blank">413-586-7350</a> ext. 222<br>

<a href="tel:413-695-2730" value="+14136952730" target="_blank">413-695-2730</a> (cell) Visit <a href="http://www.cetonline.org" target="_blank">www.cetonline.org</a> <<a href="http://www.cetonline.org" target="_blank">http://www.cetonline.org</a>><br>

Support our work <<a href="https://www.merchantamerica.com/cet/echopay/index.php" target="_blank">https://www.merchantamerica.com/cet/echopay/index.php</a>><br>
<br>
_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
</blockquote></div><br><br clear="all"><br>-- <br>Rob Hudson<br>
</div>