<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=Content-Type content="text/html; charset=us-ascii">
<meta name=Generator content="Microsoft Word 12 (filtered medium)">
<!--[if !mso]>
<style>
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style>
<![endif]-->
<style>
<!--
/* Font Definitions */
@font-face
{font-family:"MS Mincho";
panose-1:2 2 6 9 4 2 5 8 3 4;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:"\@MS Mincho";
panose-1:2 2 6 9 4 2 5 8 3 4;}
@font-face
{font-family:"Stylus BT";
panose-1:2 14 4 2 2 2 6 2 3 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"Balloon Text Char";
margin:0in;
margin-bottom:.0001pt;
font-size:8.0pt;
font-family:"Tahoma","sans-serif";}
span.EmailStyle17
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.BalloonTextChar
{mso-style-name:"Balloon Text Char";
mso-style-priority:99;
mso-style-link:"Balloon Text";
font-family:"Tahoma","sans-serif";}
.MsoChpDefault
{mso-style-type:export-only;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.Section1
{page:Section1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="2050" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=EN-US link=blue vlink=purple>
<div class=Section1>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Hi Xiaoyang,<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>0.4 cfm/ft2 can be entered in the same detailed edit window I
copied you on earlier. <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>If you set the minimum flow to 0.5 cfm/ft2, that implies a
proposed system design decision. Note that the referenced section is
specifically for Baseline HVAC systems, not your proposed model.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>You can avoid making an assumption of which is greater, simply enter
both the ventilation requirements and the minimum cfm/ft2. eQuest will
work out both for each hour, and provide cfm to meet hourly ventilation needs
in excess of the minimum ratio as necessary – this meets the requirement
of the referenced section.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>~Nick<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><img width=119 height=37 id="Picture_x0020_1"
src="cid:image001.jpg@01CBE23B.6666C4B0" alt="cid:489575314@22072009-0ABB"></span><b><span
style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p> </o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'>NICK CATON, E.I.T.</span></b><b><span style='font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><span style='font-size:7.5pt;font-family:"Calibri","sans-serif";
color:#CC9900'>PROJECT ENGINEER<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>Smith & Boucher Engineers</span><span style='font-size:7.5pt;
color:#CC9900'><o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>25501 west valley parkway<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>olathe ks 66061<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>direct 913 344.0036<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>fax 913 345.0617<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><a href="www.smithboucher.com"
title="blocked::www.smithboucher.com"><span style='font-size:10.0pt'>www.smithboucher.com</span></a></span><u><span
style='font-size:10.0pt;font-family:"Calibri","sans-serif";color:blue'> </span></u><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> xiaoyang shi
[mailto:xs2144@gmail.com] <br>
<b>Sent:</b> Monday, March 14, 2011 11:17 AM<br>
<b>To:</b> Nick Caton; equest-users@lists.onebuilding.org<br>
<b>Subject:</b> Re: [Equest-users] VAV minimum flow<o:p></o:p></span></p>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<p class=MsoNormal style='margin-bottom:12.0pt'>Hi Nick,<br>
<br>
How do you think this standard from ASHRAE 90.1 G3.1.3.13 <span
style='background:#FFFF66'>VAV Minimum Flow Setpoints (Systems 5 and 7).
Minimum volume setpoints for VAV reheat boxes shall be 0.4 cfm/ft2 of floor
area served or the minimum ventilation rate, whichever is larger.</span><br>
<br>
In my opinion, it means, if we set "Minimum Design Flow is 0.5
cfm/ft2", the VAV minimum flow should be set 80% (we assume the minimum
ventilation rate is smaller than VAV minimum flow.), Or I am wrong?<br>
<br>
Thank you very much.<br>
<br>
Best,<br>
Xiaoyang<br>
<br>
<o:p></o:p></p>
<div>
<p class=MsoNormal>On Fri, Mar 11, 2011 at 5:18 PM, Nick Caton <<a
href="mailto:ncaton@smithboucher.com">ncaton@smithboucher.com</a>> wrote:<o:p></o:p></p>
<div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'>Hi there Xiaoyang,</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'> </span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'>VAV min flows can be set both in wizards
and in detailed edit modes. See following screenshots.</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'> </span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'>The “standard” depends on
the HVAC design, and specifically how ventilation air is being
distributed. There’s a range of CFM’s that the factory will
set as a minimum terminal unit at depending on the size, but it may well be
zero if you are distributing ventilation air via DOAS in certain ways.
I’d suggest asking your HVAC designer directly what the minimum is for each
unit (it’s probably scheduled), and use that info to either come up with
an average for each zone or to set the minimum for each zone separately.</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'> </span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'>Here’s the wizard…</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'><b>Error! Filename not specified.</b></span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'>… and in detailed, double click on
a space served by a VAV system, under the Airside HVAC tab, to find the
following window. In this case, the minimum flow is set to 30% (0.30):</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'><b>Error! Filename not specified.</b></span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'> </span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'> </span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'>~Nick</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'><b>Error! Filename not specified.</b></span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='font-size:11.0pt;color:#2D4D5E'> </span></b><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='font-size:11.0pt;color:#2D4D5E'>NICK CATON, E.I.T.</span></b><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:7.5pt;color:#CC9900'>PROJECT ENGINEER</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:#2D4D5E'>Smith & Boucher Engineers</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:#2D4D5E'>25501 west valley parkway</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:#2D4D5E'>olathe ks 66061</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:#2D4D5E'>direct <a href="tel:913%20344.0036"
target="_blank">913 344.0036</a></span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:#2D4D5E'>fax <a href="tel:913%20345.0617"
target="_blank">913 345.0617</a></span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'><a href="http://www.smithboucher.com"
target="_blank" title="blocked::www.smithboucher.com"><span style='font-size:
10.0pt'>www.smithboucher.com</span></a></span><u><span style='font-size:10.0pt;
color:blue'> </span></u><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'> </span><o:p></o:p></p>
<div style='border:none;border-top:solid windowtext 1.0pt;padding:3.0pt 0in 0in 0in;
border-color:-moz-use-text-color -moz-use-text-color'>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='font-size:10.0pt'>From:</span></b><span style='font-size:10.0pt'> <a
href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a>
[mailto:<a href="mailto:equest-users-bounces@lists.onebuilding.org"
target="_blank">equest-users-bounces@lists.onebuilding.org</a>] <b>On Behalf Of
</b>xiaoyang shi<br>
<b>Sent:</b> Friday, March 11, 2011 2:35 PM<br>
<b>To:</b> <a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a><br>
<b>Subject:</b> [Equest-users] VAV minimum flow</span><o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'>Hi
folks,<br>
<br>
Do you know how to set the <span style='background:#FFFF66'>"VAV minimum
flow" (percentage) </span>at the "HVAC zones: temperatures and Air
Flows" panel? eQUEST default number is 40%. Is there any standard?<br>
<br>
Thank you.<o:p></o:p></p>
</div>
</div>
</div>
</div>
<p class=MsoNormal><br>
<br>
<o:p></o:p></p>
</div>
</body>
</html>