<div>Hi Paul,</div>
<div> </div>
<div>I completed a VRV system LEED submission last summer 2010 that was accepted by LEED and achieved a LEED Gold certification with it.  I'll have to look it up, but I think with the VRV mfg adjustment factors provided by Daikan I was able to report/demonstrate 39% Energy Cost Savings over the baseline.   </div>

<div> </div>
<div>There are a few quirks about this model and project that I'd love to discuss the details with you.  The first being that this was still a late-bloomer V2.1 LEED project, so the baseline analysis was using 90.1-2001...but the proposed showed the VRV System efficiencies fairly well from a "relative" perspective and thus I was able to 'make-the-case' to the GBCI reviewer(s)...</div>

<div> </div>
<div>If it is true what you say that the utility or any other organization (i.e. GBCI?)  is intending to dictate which sim programs are acceptable or have to be used for these models, this will make it very difficult to support the purpose of LEED in general and would put me out of business as an independent simulator if I was forced to pay for sim programs that I can't afford or really dont' even know how to use...I can see this being a very bad industry situation in your market if that's the case....Am I sensing "simulation discrimination"?    :)</div>

<div> </div>
<div>Let's talk more if you want some of the finer details of my experience.  </div>
<div> </div>
<div>Cheers,</div>
<div>Pasha<br><br></div>
<div class="gmail_quote">On Wed, Feb 9, 2011 at 6:33 AM, Paul Diglio <span dir="ltr"><<a href="mailto:paul.diglio@sbcglobal.net">paul.diglio@sbcglobal.net</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT: #ccc 1px solid; MARGIN: 0px 0px 0px 0.8ex; PADDING-LEFT: 1ex" class="gmail_quote">
<div>
<div style="FONT-FAMILY: times new roman,new york,times,serif; COLOR: #000000; FONT-SIZE: 10pt">
<div>Ladies & Gentlemen:<br><br>There has been some discussion on this forum about modeling VRV Heat Recovery using the exceptional calculation method described in the Energy Trust of Oregon BSUG presentation of April 15, 2009.<br>
<br>Has anyone actually had this methodology accepted on a LEED project using custom curves built from the manufacturers' performance tables?<br><br>If so, could you provide the name of the project?<br><br>The utility companies in CT are offering a modeling incentive ($6,000), a dollar per Ft2 improvement over 90.1 (Up to $2.00 Ft2) and a LEED incentive ($5,000 Silver, $10,000 Gold, $15,000 Platinum).  They are hesitant to accept the above calculation method and are leaning toward requiring Energy Pro or Trace models.<br>
<br>I would like to verify that the GBCI will accept this procedure rather than purchase and learn new software.<br><br>Thank you for your help,<br><br>Paul Diglio<br></div></div></div><br>_______________________________________________<br>
Equest-users mailing list<br><a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br>