<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
</head>
<body class='hmmessage'>
I am running a simulation to compare various systems. When I run the
4-pipe fan coil and I look at SS-D I get a building load for heating and
cooling with what it should be but when I use the same building and
change the system to Standard VAV with HW and CW the building cooling
load is 20% higher and the building heating load is 65% higher. Does
anyone have any suggestions as why this would be happening?<br><br>Kevin Hupf, LEED AP <br><br><font style="font-size: 10pt;" size="2" face="Arial">K</font>ucirek <font style="font-size: 10pt;" size="2" face="Verdana">E</font>ngineering, <font style="font-size: 10pt;" size="2" face="Verdana">I</font>nc.<br>7587 Main St.<br>Omaha, NE 68127<br>Ph: (402)951-0022<br>Fax: (402)951-0023<br>kucirekengineering@hotmail.com<br>www.kucirekengineering.com<br><br><br> </body>
</html>