Hi everyone,<br><br>I am performing energy analysis for a University hall of residence using solar water heaters to provide the hot water requirements both for DHW and for an absorption chiller system.<br>From previous posts on equest-users, I came to understand that solar water heaters cannot be directly implemented in equest, but the energy saving can be discounted from the total energy consumption. Is that the correct approach?<br>
<br>I tried specifying a two-stage absorption chiller as the chiller type in DD wizard but the simulation is not completed successfully, terminating at around 18% with 1 error. I would be grateful to receive help related to modeling the absorption chiller system. Is there any specific parameter(s) I need to give in the chiller properties dialog which am missing or are the default values given sufficient to run the simulation.<br>
<br>Thanks,<br>Kishan <br>