<br><font size=2 face="sans-serif">I do agree that the initiative is a
bit on the "Star Trek" side, however I can't think of any other
way to harvest the data and display it on a screen.  So I want to
thank all for your input. </font>
<br><font size=2 face="sans-serif"><br>
<br>
<br>
Michael Hupel, LEED AP<br>
Account Executive<br>
Project & Business Development<br>
Johnson Controls L. P.<br>
3070 Mainway Drive <br>
Burlington, ON L7N 3X1<br>
(905) 335-3325 ext. 237<br>
(905) 730-9642 cell</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">From:</font>
<td><font size=1 face="sans-serif">John Aulbach <jra_sac@yahoo.com></font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">To:</font>
<td><font size=1 face="sans-serif">Michael.Hupel@jci.com, equest-users@lists.onebuilding.org</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Date:</font>
<td><font size=1 face="sans-serif">12/07/2010 01:15 PM</font>
<tr valign=top>
<td><font size=1 color=#5f5f5f face="sans-serif">Subject:</font>
<td><font size=1 face="sans-serif">Re: [Equest-users] Display Kiosk</font></table>
<br>
<hr noshade>
<br>
<br>
<br><font size=3 face="Roman">Michael:</font>
<br><font size=3 face="Roman"> </font>
<br><font size=3 face="Roman">This is getting a bit "Star Trek".
eQuest does its 8,760 hour simulation based on input provided by both the
user and the weather file. What you seem to be seeking is REAL TIME information,
avalable only through multple sensor inputs. For that skin load parameter,
you might use eQuest to generate the building skin loss baseed on outdoor
temperature, place these numbers in a spreadsheet, thern have an outdoor
air temperature sensor pick the number based on the delta T (indoor to
outdoor).</font>
<br><font size=3 face="Roman"> </font>
<br><font size=3 face="Roman">You could use eQuest to generate your range,
based on whatever is the driving parameter is, then have a number come
from a programmed calculation to display "Real Time" output.</font>
<br><font size=3 face="Roman"> </font>
<br><font size=3 face="Roman">You can always ask Chief Engineering Officer
Montgomery Scott. Scotty can fix anything..</font>
<br><font size=3 face="Roman"> </font>
<br><a name=_MailAutoSig></a><font size=3 color=#004080 face="Calibri">John
R. Aulbach, PE, CEM</font>
<br><font size=3 color=#004080 face="Calibri">Senior Energy Engineer</font>
<br>
<hr noshade>
<br><font size=3 color=#000080 face="Calibri"><b>Partner</b></font><font size=3 color=#008000 face="Calibri"><b>
</b></font><font size=3 color=#006000 face="Calibri"><b>Energy</b></font>
<br><font size=3 color=#004080 face="Calibri">1990 E. Grand Avenue, El
Segundo, CA 90245<br>
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745</font>
<br><a href=http://www.ptrenergy.com/><font size=3 color=blue face="Calibri"><u>www.ptrenergy.com</u></font></a><font size=3 color=#004080 face="Calibri">
</font><a href=mailto:%7C%20jaulbach@ptrenergy.com><font size=3 color=blue face="Calibri"><u>|
jaulbach@ptrenergy.com</u></font></a>
<br><font size=3 face="Calibri"> </font>
<br>
<br>
<br>
<hr><font size=2 face="Tahoma"><b>From:</b> "Michael.Hupel@jci.com"
<Michael.Hupel@jci.com><b><br>
To:</b> equest-users@lists.onebuilding.org<b><br>
Sent:</b> Tue, December 7, 2010 9:19:14 AM<b><br>
Subject:</b> [Equest-users] Display Kiosk</font><font size=3 face="Roman"><br>
<br>
</font><font size=2 face="sans-serif"><br>
We are the controls contractor for a LEED Platinum building and have been
asked to supply points and information that can be displayed on a Kiosk
Screen.  I have attached a list of what is expected of us to provide.
 Although most of the list will involve the installation of meters/sensors
to harvest the information I struggle as to how to measure items such as
No. 6 (Current overall building skin loss)?  E-Quest can establish
the baseline of what the skin loss would be so I was wondering if e-quest
can somehow be manipulated to supply on-going parametric runs?  Can
e-quest be programmed to have regular automatic inputs which would generate
automatic outputs that can be displayed?</font><font size=3 face="Roman">
<br>
</font><font size=2 face="sans-serif"><br>
Probably something that has never been done.  </font><font size=3 face="Roman">
<br>
<br>
</font><font size=2 face="sans-serif"><br>
<br>
<br>
<br>
Michael Hupel, LEED AP<br>
Account Executive<br>
Project & Business Development<br>
Johnson Controls L. P.<br>
3070 Mainway Drive <br>
Burlington, ON L7N 3X1<br>
(905) 335-3325 ext. 237<br>
(905) 730-9642 cell</font>
<br>
<br>
<br>