<div>I have found that this has to do with the system type you choose.  If you have a central system such as VAV reheat, which serves many zones, you'll get one plenum.  If you have PTACs, with one piece of equipment for each zone, you'll have multiple plenums.<br>
</div><div><br></div><div>--</div><div>Karen</div><br><div class="gmail_quote">On Thu, Dec 2, 2010 at 11:03 AM, Pasha Korber-Gonzalez <span dir="ltr"><<a href="mailto:pasha.pkconsulting@gmail.com">pasha.pkconsulting@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div>So, I figured out where my plenum windows were going...Because eQuest set up a single plenum for my entire floor plan, as opposed to multilple plenum spaces for each Zoned space that I have.</div>

<div> </div>
<div>My new question that I haven't been able to figure out is this:</div>
<div> </div>
<div>When (or how to determine when) eQuest will create a single plenum for the entire floor plan, and when does it create a single plenum space for each space zoned in my floor plan?</div>
<div> </div>
<div>Sometimes I'll set up a model and it will do one approach and then sometimes I'll set up a model and it will create a single space plenum??</div>
<div> </div>
<div>Any hints anyone can give me are appreciated.</div>
<div> </div>
<div>thanks,</div>
<div>Pasha<font color="#888888"><br><br></font></div><div><div class="h5">
<div class="gmail_quote">On Wed, Dec 1, 2010 at 3:35 PM, Pasha Korber-Gonzalez <span dir="ltr"><<a href="mailto:pasha.pkconsulting@gmail.com" target="_blank">pasha.pkconsulting@gmail.com</a>></span> wrote:<br>
<blockquote style="border-left:#ccc 1px solid;margin:0px 0px 0px 0.8ex;padding-left:1ex" class="gmail_quote">
<div>Hi All,</div>
<div> </div>
<div>I've always been able to do this before, but its not letting me do it today on a model I am working on...</div>
<div> </div>
<div>I'm am trying to place some windows on the plenum walls.  In real life these are actually a spandrel panel.  I'm in the custom window placement and when I place the window on the plenum wall it shows up in the custom window screen, but when I go to check my 3D view, the window on the plenum wall is not displayed.</div>


<div> </div>
<div>Has anyone had this problem before?   I've always been able to place windows there before (I specifically remember being able to do it in the window wizard for 3.63b version.   I know I can verify thier existance when I move to DDedit, but I'm just trying to be more efficient using my wizard tools first.</div>


<div> </div>
<div>thanks,</div>
<div>pkg</div></blockquote></div><br>
</div></div><br>_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br>