<div>Hello, Fernando,</div><div><br></div>You can give a specific meter for this room in the model - if you have the whole building model already.<div><br></div><div>If not, I suggest you build a simple model that keep the CT room and X-ray room the same with your proposed, as external wall still external wall, internal wall still internal wall. Be careful to set the internal wall to suitable type - most of time <b>air</b> is not the best choice as eQuest default.</div>
<div><br></div><div>I am also looking forward to other better idea for this scenario.</div><div><br></div><div>Grammy<br><br><div class="gmail_quote">On Wed, Dec 1, 2010 at 11:48 PM, Fernando Valenzuela <span dir="ltr"><<a href="mailto:fer.val.dom@gmail.com">fer.val.dom@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">Hello everyone I need a simulation of the heating and cooling consumption but only for a CT room and X-ray room on hospital. I know the year rates for HVAC for the whole building.<div>
<br></div><div>Is it possible to run a simulation on equest just for a single room?. If so, which building type should I use "health medical (outpatient)" </div>
<div><br></div><div><br></div><div>Thanks</div>
<br>_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br></div>