Hello,<br><br>I'm trying to conduct several simple sensitivity analyses for a building model.  I understand how to create a Global Parameter and then implement it into the Detailed Mode for a given input.  However, I'm confused on how to correlate the input in Wizard mode I want to change to the input value in Detailed Mode.<br>
<br>For example, I want to compare the change in energy consumption for Ground Floor Construction concrete thickness (that is, comparing 4, 6, 8, and 12 in.).  In Wizard Mode, I change this parameter on the <i>Building Envelope Construction </i>page, <i>Ground Floor</i> section, under <i>Construction</i>.  However, in Detailed Mode where can I find this specific parameter?  In the Component Tree, Construction and Layers have IFlr Constructin, but don't know which floor is refers.  I can also found in Materials Concrete at a thickness of t = 12 in. (the nominal setting I chose), but I can only assume choosing this changes other sections of the building.<br>
<br>Is there a simple way to correlate the parameter inputs in Wizard Mode to Detailed Mode?<br><br>Thanks!<br>Katie<br><br>Note: I know the example I gave shouldn't haven't significant change in energy consumption, but that's what I'm trying to prove.<br clear="all">
<br>-- <br>Katie MacKenzie<br>Undergraduate Student<br>Smith College, Picker Engineering Program<br><br>503.730.6354<br><a href="mailto:kmacken2@smith.edu" target="_blank">kmacken2@smith.edu</a><br><a href="http://www.ktmackenzie.com" target="_blank">www.ktmackenzie.com</a><br>
<br>