<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:x="urn:schemas-microsoft-com:office:excel" xmlns:p="urn:schemas-microsoft-com:office:powerpoint" xmlns:a="urn:schemas-microsoft-com:office:access" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema" xmlns:b="urn:schemas-microsoft-com:office:publisher" xmlns:ss="urn:schemas-microsoft-com:office:spreadsheet" xmlns:c="urn:schemas-microsoft-com:office:component:spreadsheet" xmlns:odc="urn:schemas-microsoft-com:office:odc" xmlns:oa="urn:schemas-microsoft-com:office:activation" xmlns:html="http://www.w3.org/TR/REC-html40" xmlns:q="http://schemas.xmlsoap.org/soap/envelope/" xmlns:rtc="http://microsoft.com/officenet/conferencing" xmlns:D="DAV:" xmlns:Repl="http://schemas.microsoft.com/repl/" xmlns:mt="http://schemas.microsoft.com/sharepoint/soap/meetings/" xmlns:x2="http://schemas.microsoft.com/office/excel/2003/xml" xmlns:ppda="http://www.passport.com/NameSpace.xsd" xmlns:ois="http://schemas.microsoft.com/sharepoint/soap/ois/" xmlns:dir="http://schemas.microsoft.com/sharepoint/soap/directory/" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" xmlns:dsp="http://schemas.microsoft.com/sharepoint/dsp" xmlns:udc="http://schemas.microsoft.com/data/udc" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sub="http://schemas.microsoft.com/sharepoint/soap/2002/1/alerts/" xmlns:ec="http://www.w3.org/2001/04/xmlenc#" xmlns:sp="http://schemas.microsoft.com/sharepoint/" xmlns:sps="http://schemas.microsoft.com/sharepoint/soap/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:udcs="http://schemas.microsoft.com/data/udc/soap" xmlns:udcxf="http://schemas.microsoft.com/data/udc/xmlfile" xmlns:udcp2p="http://schemas.microsoft.com/data/udc/parttopart" xmlns:wf="http://schemas.microsoft.com/sharepoint/soap/workflow/" xmlns:dsss="http://schemas.microsoft.com/office/2006/digsig-setup" xmlns:dssi="http://schemas.microsoft.com/office/2006/digsig" xmlns:mdssi="http://schemas.openxmlformats.org/package/2006/digital-signature" xmlns:mver="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns:mrels="http://schemas.openxmlformats.org/package/2006/relationships" xmlns:spwp="http://microsoft.com/sharepoint/webpartpages" xmlns:ex12t="http://schemas.microsoft.com/exchange/services/2006/types" xmlns:ex12m="http://schemas.microsoft.com/exchange/services/2006/messages" xmlns:pptsl="http://schemas.microsoft.com/sharepoint/soap/SlideLibrary/" xmlns:spsl="http://microsoft.com/webservices/SharePointPortalServer/PublishedLinksService" xmlns:Z="urn:schemas-microsoft-com:" xmlns:st="" xmlns="http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=Content-Type content="text/html; charset=utf-8">
<meta name=Generator content="Microsoft Word 12 (filtered medium)">
<!--[if !mso]>
<style>
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style>
<![endif]-->
<style>
<!--
/* Font Definitions */
@font-face
{font-family:"MS Mincho";
panose-1:2 2 6 9 4 2 5 8 3 4;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Cambria;
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:"Stylus BT";
panose-1:2 14 4 2 2 2 6 2 3 4;}
@font-face
{font-family:"\@MS Mincho";
panose-1:2 2 6 9 4 2 5 8 3 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
h5
{mso-style-priority:9;
mso-style-link:"Heading 5 Char";
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:10.0pt;
font-family:"Times New Roman","serif";
font-weight:bold;}
p.MsoCaption, li.MsoCaption, div.MsoCaption
{mso-style-priority:35;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
p.MsoBodyText, li.MsoBodyText, div.MsoBodyText
{mso-style-priority:99;
mso-style-link:"Body Text Char";
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"Balloon Text Char";
margin:0in;
margin-bottom:.0001pt;
font-size:8.0pt;
font-family:"Tahoma","sans-serif";}
p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph
{mso-style-priority:34;
margin-top:0in;
margin-right:0in;
margin-bottom:0in;
margin-left:.5in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
span.Heading5Char
{mso-style-name:"Heading 5 Char";
mso-style-priority:9;
mso-style-link:"Heading 5";
font-family:"Cambria","serif";
color:#243F60;}
span.BodyTextChar
{mso-style-name:"Body Text Char";
mso-style-priority:99;
mso-style-link:"Body Text";
font-family:"MS Mincho";}
span.BalloonTextChar
{mso-style-name:"Balloon Text Char";
mso-style-priority:99;
mso-style-link:"Balloon Text";
font-family:"Tahoma","sans-serif";}
p.d2hmainlinknav, li.d2hmainlinknav, div.d2hmainlinknav
{mso-style-name:d2hmainlinknav;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
p.tabledata, li.tabledata, div.tabledata
{mso-style-name:tabledata;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
p.doe-2input, li.doe-2input, div.doe-2input
{mso-style-name:doe-2input;
mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
span.heading5char0
{mso-style-name:heading5char;
mso-style-priority:9;
font-family:"Cambria","serif";
color:#243F60;}
span.bodytextchar0
{mso-style-name:bodytextchar;
mso-style-priority:99;
font-family:"MS Mincho";}
span.balloontextchar0
{mso-style-name:balloontextchar;
mso-style-priority:99;
font-family:"Tahoma","sans-serif";}
span.heading5char00
{mso-style-name:heading5char0;
mso-style-priority:9;
font-family:"Cambria","serif";
color:#243F60;}
span.bodytextchar00
{mso-style-name:bodytextchar0;
mso-style-priority:99;
font-family:"MS Mincho";}
span.balloontextchar00
{mso-style-name:balloontextchar0;
mso-style-priority:99;
font-family:"Tahoma","sans-serif";}
span.heading5char000
{mso-style-name:heading5char00;
mso-style-priority:9;
font-family:"Cambria","serif";
color:#243F60;}
span.bodytextchar000
{mso-style-name:bodytextchar00;
mso-style-priority:99;
font-family:"Times New Roman","serif";}
span.balloontextchar000
{mso-style-name:balloontextchar00;
mso-style-priority:99;
font-family:"Tahoma","sans-serif";}
span.EmailStyle37
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle38
{mso-style-type:personal;
font-family:"Arial","sans-serif";
color:navy;}
span.EmailStyle39
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle40
{mso-style-type:personal;
font-family:"Arial","sans-serif";
color:navy;}
span.EmailStyle41
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle42
{mso-style-type:personal;
font-family:"Arial","sans-serif";
color:navy;}
span.d2hbreadcrumbslinkseparator
{mso-style-name:d2hbreadcrumbslinkseparator;}
span.EmailStyle45
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.Section1
{page:Section1;}
/* List Definitions */
@list l0
{mso-list-id:904221164;
mso-list-template-ids:881071202;}
@list l1
{mso-list-id:1475608654;
mso-list-type:hybrid;
mso-list-template-ids:756952050 -935042366 67698691 67698693 67698689 67698691 67698693 67698689 67698691 67698693;}
@list l1:level1
{mso-level-number-format:bullet;
mso-level-text:-;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;
font-family:"Calibri","sans-serif";
mso-fareast-font-family:"MS Mincho";
mso-bidi-font-family:"Times New Roman";}
@list l1:level2
{mso-level-tab-stop:1.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l1:level3
{mso-level-tab-stop:1.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l1:level4
{mso-level-tab-stop:2.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l1:level5
{mso-level-tab-stop:2.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l1:level6
{mso-level-tab-stop:3.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l1:level7
{mso-level-tab-stop:3.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l1:level8
{mso-level-tab-stop:4.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l1:level9
{mso-level-tab-stop:4.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l2
{mso-list-id:1723747571;
mso-list-type:hybrid;
mso-list-template-ids:870495024 67698703 67698713 67698715 67698703 67698713 67698715 67698703 67698713 67698715;}
@list l2:level1
{mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;}
@list l2:level2
{mso-level-tab-stop:1.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l2:level3
{mso-level-tab-stop:1.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l2:level4
{mso-level-tab-stop:2.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l2:level5
{mso-level-tab-stop:2.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l2:level6
{mso-level-tab-stop:3.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l2:level7
{mso-level-tab-stop:3.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l2:level8
{mso-level-tab-stop:4.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l2:level9
{mso-level-tab-stop:4.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l3
{mso-list-id:1811047805;
mso-list-type:hybrid;
mso-list-template-ids:1987988738 -1706630874 67698713 67698715 67698703 67698713 67698715 67698703 67698713 67698715;}
@list l3:level1
{mso-level-number-format:alpha-upper;
mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;
mso-ascii-font-family:Calibri;
mso-fareast-font-family:"MS Mincho";
mso-hansi-font-family:Calibri;
mso-bidi-font-family:"Times New Roman";}
@list l3:level2
{mso-level-tab-stop:1.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l3:level3
{mso-level-tab-stop:1.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l3:level4
{mso-level-tab-stop:2.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l3:level5
{mso-level-tab-stop:2.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l3:level6
{mso-level-tab-stop:3.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l3:level7
{mso-level-tab-stop:3.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l3:level8
{mso-level-tab-stop:4.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l3:level9
{mso-level-tab-stop:4.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l4
{mso-list-id:1925531006;
mso-list-type:hybrid;
mso-list-template-ids:1348531152 67698703 67698713 67698715 67698703 67698713 67698715 67698703 67698713 67698715;}
@list l4:level1
{mso-level-tab-stop:.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l4:level2
{mso-level-number-format:alpha-lower;
mso-level-tab-stop:1.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l4:level3
{mso-level-tab-stop:1.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l4:level4
{mso-level-tab-stop:2.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l4:level5
{mso-level-tab-stop:2.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l4:level6
{mso-level-tab-stop:3.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l4:level7
{mso-level-tab-stop:3.5in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l4:level8
{mso-level-tab-stop:4.0in;
mso-level-number-position:left;
text-indent:-.25in;}
@list l4:level9
{mso-level-tab-stop:4.5in;
mso-level-number-position:left;
text-indent:-.25in;}
ol
{margin-bottom:0in;}
ul
{margin-bottom:0in;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="2050" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=EN-US link=blue vlink=purple>
<div class=Section1>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Thanks to some extra guidance from John Forester and David
Eldrige, I can tie up some loose ends Ieft on the list this week.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Analyzing the isolated default curves plotted out, I failed to
keep one thing in perspective: while each demonstrates how the variables (CHWT,
CWT, dT, PLR) independently affect a chiller’s performance, the three curves
ultimately work in concert to produce a net effect each hour.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>The EIR-FPLR&dT curve appeared wonky to me because I didn’t
remember the normalized EIR is simulataneously affected by the CHWT and CWT
values, independent of the dT. <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>I expect many eyes are glazing over =). This is really hard to
convey in text alone, so I brought along some show-and-tell pictures for the
group:<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>The following is the two default EIR curves: EIR-f(t1, t2) and
EIR-f(PLR, dT) I showed earlier, multiplied together for a single CHWT and
various CWT’s. </span><o:p></o:p></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>In a nutshell, this illustrates how efficiency changes
independent of the effects of the water temperatures on the chiller’s hourly capacity.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>The combined effects of the 2 curves moves their “sweet spots” into
the range I was expecting:</span><o:p></o:p></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><img width=661 height=512 id="Picture_x0020_5"
src="cid:image001.png@01CB7C2B.4A52A800"
alt="cid:image002.png@01CB7C15.4E6F3720"></span><o:p></o:p></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>…And the following is the same thing, but adding the effects of
the CAP-FT curve to the mix: all 3 default curves applied together in concert.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>This is what you’re modeling for a centrifugal VSD chiller every
time you rely on the library default curves.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'> </span><o:p></o:p></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Condenser water temps straying far from the rated conditions
(85) get an efficiency penalty between these curves, just as the isolated
CAP-FT curve indicated.</span><o:p></o:p></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>These curves pass my personal gut check: they look very
much like some chiller curves I’m used to seeing. </span><o:p></o:p></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Of note: This visual can serve as a great reference for
judging whether developing custom curves is a worthwhile venture for a given chiller.
<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><img width=661 height=512 id="Picture_x0020_6"
src="cid:image002.png@01CB7C2B.4A52A800"
alt="cid:image003.png@01CB7C15.4E6F3720"></span><o:p></o:p></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>In conclusion, the default curves for centrifugal VSD chillers
aren’t that crazy after all, but be cautioned they can definitely be very
different from your actually equipment. <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>I tried briefly to figure out who the author(s) of that EDR guideline
were 5 years ago, but came up empty handed… <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Does anyone else agree or disagree with me & John regarding
whether it should be fundamentally sound to define curves from design
capacities on downward (setting DESIGN-PLR=1.0), as long as those capacities aren’t
exceeded in the model at-hand? I’d feel comfier if it felt like a consensus
=).<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Thanks everyone,<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>~Nick<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><img width=119 height=37 id="Picture_x0020_1"
src="cid:image003.jpg@01CB7C2B.4A52A800" alt="cid:489575314@22072009-0ABB"></span><b><span
style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p> </o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'>NICK CATON, E.I.T.</span></b><b><span style='font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><span style='font-size:7.5pt;font-family:"Calibri","sans-serif";
color:#CC9900'>PROJECT ENGINEER</span><span style='font-size:7.5pt;color:#CC9900'><o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>25501 west valley parkway<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>olathe ks 66061<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>direct 913 344.0036<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>fax 913 345.0617<o:p></o:p></span></p>
<p class=MsoNormal><i><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>Check out our new web-site @ </span></i><span style='font-size:
11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><a
href="www.smithboucher.com" title="blocked::www.smithboucher.com"><span
style='font-size:10.0pt'>www.smithboucher.com</span></a></span><u><span
style='font-size:10.0pt;font-family:"Calibri","sans-serif";color:blue'> </span></u><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p></o:p></span></p>
</div>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> John T. Forester
[mailto:JohnTF@BVHis.com] <br>
<b>Sent:</b> Wednesday, November 03, 2010 3:42 PM<br>
<b>To:</b> Nick Caton; equest-users@lists.onebuilding.org<br>
<b>Subject:</b> RE: [Equest-users] Chiller Curves (oh boy!)<o:p></o:p></span></p>
</div>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>Nick,<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>Thanks for adding your thoughts. I believe you and I are on
the same page here.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>On item 2 below, the help files state that the EIR-FPLR&dT
curve must be normalized to “full-load” or “maximum capacity” and not the
design capacity. Intuitively (maybe), if you normalize these curves to
the design capacity and then set the DESIGN-PLR to 1.0, it seems that this is
locking in your design values as maximum values. Physically, the machine
may have more capacity, but your energy model will be limited to these hard-coded
design values.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>One way to check the model curve accuracy is to use hourly report
blocks/reports to track the CHW supply temp, entering CW temp, chiller PLR,
chiller EIR. Use your normalized curves to calculate the EIR for each
hour with the CHW and CW temps and PLR. Then compare your calculated EIR
with the EIR from eQuest. I believe you can also track the chiller
capacity to see if it is holding the max capacity based on the DESIGN-PLR value
and chiller capacity value you enter.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>John<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<div>
<p class=MsoNormal><span style='font-size:8.5pt;font-family:"Arial","sans-serif";
color:gray'>John T. Forester, P.E., LEED AP, Mechanical Design Engineer </span><strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:#0000A0'>I BVH
Integrated Services I</span></strong><strong><span style='font-size:8.5pt;
font-family:"Arial","sans-serif";color:black'> </span></strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'>617.658.9008
tel </span><strong><span style='font-size:8.5pt;font-family:"Arial","sans-serif";
color:#0000A0'>I</span></strong><strong><span style='font-size:8.5pt;
font-family:"Arial","sans-serif";color:gray'> </span></strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'>617.244.3753
fax</span><span style='font-size:8.5pt;font-family:"Arial","sans-serif";
color:#0000A0'> <strong><span style='font-family:"Arial","sans-serif"'>I</span></strong></span><strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'> </span></strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'>One Gateway
Center Suite 506, Newton MA 02458 </span><strong><span style='font-size:8.5pt;
font-family:"Arial","sans-serif";color:#0000A0'>I <a href="http://www.bvhis.com">www.bvhis.com</a> I
Hartford ● New Haven ● Boston</span></strong><span style='color:gray'><o:p></o:p></span></p>
</div>
<div>
<p class=MsoNormal align=center style='text-align:center'><hr size=2
width="100%" align=center tabindex=-1> <o:p></o:p></p>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> Nick Caton
[mailto:ncaton@smithboucher.com] <br>
<b>Sent:</b> Wednesday, November 03, 2010 3:40 PM<br>
<b>To:</b> John T. Forester; equest-users@lists.onebuilding.org<br>
<b>Subject:</b> RE: [Equest-users] Chiller Curves (oh boy!)</span><o:p></o:p></p>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Yikes… looks like a slew of responses got out before I finished
this one, but I have a lot to say =)… For context you might want to check
which email I’m responding to first, everyone ;).<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>John, thanks very much for the encouragement. I think I
can help further your thoughts:<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l2 level1 lfo2'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>1.<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Getting a manufacturer vendor to cooperate is indeed tricky for
all parties, and I’m not convinced their selection software really affords them
the capability to find maximum loading points for varying condenser/evaporater
temps in a time-efficient fashion… time will tell but I’ve got a very smart rep
right now promising to see what he can do.<o:p></o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l2 level1 lfo2'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>2.<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>I’d rest easier knowing it’s perfectly fine to normalize all
three curves to the design conditions and have a PLR of 1.0 equal the design
conditions… except for the DOE2 help entries explicitly telling us that for
centrifugal chillers, “full load” means “maximum” (see the highlighted
copy-paste job way down below and the entry for EIR-FPLR as well). <o:p></o:p></span></p>
<p class=MsoListParagraph><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoListParagraph><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>That said, your call to better understand the default curves
sounds a lot like a request, so perhaps I can scratch your back in return
;). Here are the three curves eQuest pulls from its library when you
specify a water cooled centrifugal chiller… visualized! <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoListParagraph><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Note that each curve is indeed normalized to (Z=1.0 at) ARI
conditions. I’ve followed each with my (novice) observations/commentary.<o:p></o:p></span></p>
<p class=MsoListParagraph><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><img border=0 width=662 height=532 id="Picture_x005f_x0020_5"
src="cid:image004.jpg@01CB7C2B.4A52A800"><o:p></o:p></span></p>
<p class=MsoListParagraph><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>The EIR-FPLR&dT curve seems, well, kinda wacky to me!
I’ve conferred with a few other mechanical designers, and we seem to
agree that an efficiency “sweet spot” for a centrifugal variable speed chiller
should lie somewhere between zero and full loading conditions – this curve’s
shape seems to demonstrate continually improving efficiencies as you approach
zero loading. Truthfully, there’s a very slight apex that’s hard to see
(you can tell by the curving bands) just off the charted values shown between
the 10% and 20% loading marks, but what chiller has an optimum efficiency at
15% loading? I’d of this as a “normal” shape if the z-axis were on some
scale of straight power (kW)… I’d expect that to continually drop off with the
PLR in this fashion, but that z-axis is normalized EIR (kW/ton conceptually, if
not in magnitude)… shouldn’t the default curve have a “sweet-spot” efficiency
somewhere in the vicinity of 40-60% loading?<o:p></o:p></span></p>
<p class=MsoListParagraph><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><img border=0 width=662 height=512 id="Picture_x005f_x0020_12"
src="cid:image005.jpg@01CB7C2B.4A52A800"><o:p></o:p></span></p>
<p class=MsoListParagraph><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>This EIR-FT curve is again normalized (1.0) at ARI conditions,
and tells us that the chiller will be pretty much linearly more efficient as
you increase the CHWT target temperature, and will exponentially increase in
efficiency as the condenser water temperature drops. Raising either has
less of an inverse effect. Nothing seems odd to me.<o:p></o:p></span></p>
<p class=MsoListParagraph><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><img border=0 width=662 height=512 id="Picture_x005f_x0020_35"
src="cid:image006.jpg@01CB7C2B.4A52A800"><o:p></o:p></span></p>
<p class=MsoListParagraph><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>This curve is also normalized (1.0) at ARI conditions, and is
telling us the chiller loses capacity when the condenser water either rises or
falls from ARI conditions (20-30% drop from ARI, when CWT is at 100F or 50F,
for example). I’m too new at this to know whether that makes total sense,
but my initial guess would be that colder condenser water would always be help
improve capacity… I’d infer from this curve that centrifugal chillers are
designed and optimized around a specific condenser water temperature, and that
hotter <u>or</u> colder condenser water temperatures, for the same CHWT, hurts
your equipment’s potential capacity. I suppose it might well be a
function of the refrigerant’s thermodynamic properties? The CHWT selected
has a linear, but a relative to the CWT minor effect on the capacity of the
chiller. <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l2 level1 lfo2'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>3.<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>You’ve nailed my current approach on the head! I’m just
concerned that going against the explicit instructions in the DOE2 help entries
(mentioned above) may have some significant impact on what I’m modeling…<o:p></o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l2 level1 lfo2'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>4.<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Fully agreeing. And kudos for condensing paragraphs of
fretting into a single line answer =).<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Thanks again so much for everyone’s input so far. I’d be
curious to hear any other thoughts or second-opinions we as a group may have
regarding:<o:p></o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l3 level1 lfo4'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>A.<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Why does the default part load curve above seems such an odd
shape (at least to my eyes) for a centrifugal VSD chiller? Are my chiller
fundamentals off?<o:p></o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l3 level1 lfo4'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>B.<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>To what end/purpose do the DOE2 help docs and the EDR guidelines
emphasis normalizing the EIR-FPLR curve to maximum vs. design capacities at the
rated conditions, when you can normalize and specify to ARI conditions and set
DESIGN-PLR=1.0 as John and I are discussing? I mean, I understand that
you could get a “comprehensive” set of curves allowing you to apply the same
chiller to other projects where you have a higher design capacity (or expect
higher capacities will be required), but is there any inherent loss of accuracy
if you build everything around data points encompassing all extremes present in
the simulated model?<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>~Nick<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><img border=0 width=119 height=37 id="Picture_x005f_x0020_1"
src="cid:image003.jpg@01CB7C2B.4A52A800" alt="cid:489575314@22072009-0ABB"></span><b><span
style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p> </o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'>NICK CATON, E.I.T.</span></b><b><span style='font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><span style='font-size:7.5pt;font-family:"Calibri","sans-serif";
color:#CC9900'>PROJECT ENGINEER</span><span style='font-size:7.5pt;color:#CC9900'><o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>25501 west valley parkway<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>olathe ks 66061<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>direct 913 344.0036<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>fax 913 345.0617<o:p></o:p></span></p>
<p class=MsoNormal><i><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>Check out our new web-site @ </span></i><span style='font-size:
11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><a
href="www.smithboucher.com" title="blocked::www.smithboucher.com"><span
style='font-size:10.0pt'>www.smithboucher.com</span></a></span><u><span
style='font-size:10.0pt;font-family:"Calibri","sans-serif";color:blue'> </span></u><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p></o:p></span></p>
</div>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> John T. Forester
[mailto:JohnTF@BVHis.com] <br>
<b>Sent:</b> Wednesday, November 03, 2010 11:49 AM<br>
<b>To:</b> Nick Caton; equest-users@lists.onebuilding.org<br>
<b>Subject:</b> RE: [Equest-users] Chiller Curves (oh boy!)<o:p></o:p></span></p>
</div>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>Nick,<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>I think you’re on the right track. Below are some of my
thoughts on your conclusions. I hope the modeling community will set me
straight if I’m wrong here.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<ol style='margin-top:0in' start=1 type=1>
<li class=MsoNormal style='color:navy;mso-list:l4 level1 lfo7'><span
style='font-size:10.0pt;font-family:"Arial","sans-serif"'>Getting multiple
performance runs from vendors that show part-load performance independent
of the CW and CHW temps can often be challenging. Adding the
“maximum capability” task to that for each of the conditions requires a
pretty detailed understanding of the selection software. I’d say if
you can get PLR data for 3-4 different CHW temps while holding the CW temps
constant at 85, 75, 65 (and sometimes lower) – you’re ahead of most
modelers. Working with the Mechanical Design Engineer and the vendor
together has been successful for me in the past.<o:p></o:p></span></li>
<li class=MsoNormal style='color:navy;mso-list:l4 level1 lfo7'><span
style='font-size:10.0pt;font-family:"Arial","sans-serif"'>Defining the
chiller capabilities at the “maximum” may only come into play if you
expect your model to overload the chiller above the specified design
capacity (I’m thinking building additions or process loads). At this
point, this data (or knowing what the default eQuest curves do in that
range) would be useful. Depending on your project, the time spent on
developing curves for PLR >1.0 may not be justified.<o:p></o:p></span></li>
<li class=MsoNormal style='color:navy;mso-list:l4 level1 lfo7'><span
style='font-size:10.0pt;font-family:"Arial","sans-serif"'>If you don’t
have “max” data and don’t want eQuest to assume performance at a part-load
ratio >1.0, you can set the DESIGN-PLR to 1.0.<o:p></o:p></span></li>
<li class=MsoNormal style='color:navy;mso-list:l4 level1 lfo7'><span
style='font-size:10.0pt;font-family:"Arial","sans-serif"'>Either way, you
want your curves to be normalized at whatever condition you specify
(Design or Rated) and you want to enter those values on the Basic
Specifications tab.<o:p></o:p></span></li>
</ol>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>John<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<div>
<p class=MsoNormal><span style='font-size:8.5pt;font-family:"Arial","sans-serif";
color:gray'>John T. Forester, P.E., LEED AP, Mechanical Design Engineer </span><strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:#0000A0'>I BVH
Integrated Services I</span></strong><strong><span style='font-size:8.5pt;
font-family:"Arial","sans-serif";color:black'> </span></strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'>617.658.9008
tel </span><strong><span style='font-size:8.5pt;font-family:"Arial","sans-serif";
color:#0000A0'>I</span></strong><strong><span style='font-size:8.5pt;
font-family:"Arial","sans-serif";color:gray'> </span></strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'>617.244.3753
fax</span><span style='font-size:8.5pt;font-family:"Arial","sans-serif";
color:#0000A0'> <strong><span style='font-family:"Arial","sans-serif"'>I</span></strong></span><strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'> </span></strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'>One Gateway
Center Suite 506, Newton MA 02458 </span><strong><span style='font-size:8.5pt;
font-family:"Arial","sans-serif";color:#0000A0'>I <a href="http://www.bvhis.com">www.bvhis.com</a> I
Hartford ● New Haven ● Boston</span></strong><span style='color:gray'><o:p></o:p></span></p>
</div>
<div>
<p class=MsoNormal align=center style='text-align:center'><hr size=2
width="100%" align=center tabindex=-1> <o:p></o:p></p>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> Nick Caton
[mailto:ncaton@smithboucher.com] <br>
<b>Sent:</b> Wednesday, November 03, 2010 12:06 PM<br>
<b>To:</b> John T. Forester; equest-users@lists.onebuilding.org<br>
<b>Subject:</b> RE: [Equest-users] Chiller Curves (oh boy!)</span><o:p></o:p></p>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>John,<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>The design/max ratio is exactly what I’m discussing below when I
say “DESIGN-PLR ratio,” so we’re definitely in the same ballpark =).<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>I’d like to apply/paraphrase your advice to a few conditions to
be sure I’m getting it correctly: <o:p></o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l1 level1 lfo9'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>-<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>If we create all 3 custom curves, and normalize each to a point
at maximum (not design) capacity, then the design-to-max ratio (DESIGN-PLR)
should be set to 1.00.<o:p></o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l1 level1 lfo9'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>-<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>If we create <u>only</u> the part load efficiency curve
(EIR-FPLR or EIR-FPLR&dT), and wish to use the library defaults for EIR-FT
and CAP-FT, then we should normalize this curve’s data points to ARI conditions
(as that’s what the library curves are normalized to, per James’s email – I
think I’ve read this somewhere also), specify an ARI capacity, EIR and
conditions on the basic specifications tab, and enter a DESIGN-PLR of [ARI
capacity/maximum capacity (for the same conditions)].<o:p></o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l1 level1 lfo9'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>-<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>If we create all 3 custom curves, and try to normalize each to
either ARI or design conditions, then we should specify capacity, EIR, CHWT,
CWT and condenser GPM corresponding to either the ARI or design conditions of
that normalizing point. In that case, we also specify a DESIGN-PLR using
either the ARI or design capacity divided by the maximum capacity for the same
conditions.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><u><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Profound (to me) Conclusion</span></u><span style='font-size:
11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'>: In <u>No</u>
instance should we <u>Ever</u> attempt creating custom curves and NOT have at
least one run from our manufacturer telling us what the maximum (not design)
capacity is for the normalizing point. This conclusion would only apply
to centrifugal chillers only.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Does this all sound right?<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>~Nick<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>James, <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Yeah, if all the part load data you received held the same CHWT
and CWT equal, you might be able to make your part-load curve if it could have
been a quadratic EIR-FPLR curve (like a reciprocating chiller), but not a
bi-quadratic EIR-FPLR&dT (as with my centrifugal VSD chiller). You
definitely could not approach generating custom EIR-FT or CAP-FT curves without
varying condenser and chilled water temps. That exact issue happened to
me the first few times I tried to reign my chiller reps in =). <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>This time, I convinced my rep to give me multiple part load runs
holding the CHWT constant and varying the CWT incrementally. This let me
build the bi-quadratic EIR-FPLR&dT curve as I had at least three different
dT’s represented in my part load data points. I plotted the 3D curve in
excel to check my work and darned if the generated coefficients seem to be
really accurate =)! It’s currently looking like a bittersweet
revelation however – the library curve for a water-cooled centrifugal VSD chiller
(see attached visualization) seems a LOT more generous (more efficient) at low
part loads than the one I’ve generated which matches my rep’s data… I
might share a visual of my custom curve for comparison once I’m dead-sure it’s
accurate – I’m trying to clarify a few things with my rep right now.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>~Nick<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><img border=0 width=119 height=37
id="Picture_x005f_x005f_x005f_x0020_1" src="cid:image003.jpg@01CB7C2B.4A52A800"
alt="cid:489575314@22072009-0ABB"></span><b><span style='font-size:11.0pt;
font-family:"Stylus BT","sans-serif";color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p> </o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'>NICK CATON, E.I.T.</span></b><b><span style='font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><span style='font-size:7.5pt;font-family:"Calibri","sans-serif";
color:#CC9900'>PROJECT ENGINEER</span><span style='font-size:7.5pt;color:#CC9900'><o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>25501 west valley parkway<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>olathe ks 66061<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>direct 913 344.0036<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>fax 913 345.0617<o:p></o:p></span></p>
<p class=MsoNormal><i><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>Check out our new web-site @ </span></i><span style='font-size:
11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><a
href="www.smithboucher.com" title="blocked::www.smithboucher.com"><span
style='font-size:10.0pt'>www.smithboucher.com</span></a></span><u><span
style='font-size:10.0pt;font-family:"Calibri","sans-serif";color:blue'> </span></u><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p></o:p></span></p>
</div>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> John T. Forester
[mailto:JohnTF@BVHis.com] <br>
<b>Sent:</b> Wednesday, November 03, 2010 10:29 AM<br>
<b>To:</b> Nick Caton; equest-users@lists.onebuilding.org<br>
<b>Subject:</b> RE: [Equest-users] Chiller Curves (oh boy!)<o:p></o:p></span></p>
</div>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>Nick,<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>When defining a centrifugal chiller in eQuest, one of the items on
the Basic Specifications tab under the Design vs. Rated Conditions is a
Design/Max Cap ratio. By default, this is 92% for a water cooled
unit. I believe this gets at the discussion in the help pages that talks
about maximum capacity versus design capacity and how the chiller vendor will
spec a piece of equipment. Typically, vendors don’t often get asked (or
provide) what the “Maximum” capacity of a spec’d unit is. Therefore the
performance data that they provide are at “design conditions.”<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>If you change the chiller type to a reciprocating chiller, this
“Design/Max Cap” ratio is disabled and the default specified condition changes
from “Design Conditions” to “Rated Conditions.” This suggests that there
is little “extra” capacity when a selection is done for that type of chiller.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>If you do get “maximum capacity” data and create curves from that
data, you will want to change the Design/Max Cap ratio to 1.0 so eQuest knows
that there isn’t any spare capacity at the chiller. Also if the data
points you are using to normalize your curves are different than the design
conditions for your energy model, you will want to change the “Chiller Specified
at” value to “Rated Conditions” and enter the rated conditions for CHW temp, CW
temp and CW gpm/ton to match your normalized curves.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>Hope this helps,<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'>John<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:navy'><o:p> </o:p></span></p>
<div>
<p class=MsoNormal><span style='font-size:8.5pt;font-family:"Arial","sans-serif";
color:gray'>John T. Forester, P.E., LEED AP, Mechanical Design Engineer </span><strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:#0000A0'>I BVH
Integrated Services I</span></strong><strong><span style='font-size:8.5pt;
font-family:"Arial","sans-serif";color:black'> </span></strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'>617.658.9008
tel </span><strong><span style='font-size:8.5pt;font-family:"Arial","sans-serif";
color:#0000A0'>I</span></strong><strong><span style='font-size:8.5pt;
font-family:"Arial","sans-serif";color:gray'> </span></strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'>617.244.3753
fax</span><span style='font-size:8.5pt;font-family:"Arial","sans-serif";
color:#0000A0'> <strong><span style='font-family:"Arial","sans-serif"'>I</span></strong></span><strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'> </span></strong><span
style='font-size:8.5pt;font-family:"Arial","sans-serif";color:gray'>One Gateway
Center Suite 506, Newton MA 02458 </span><strong><span style='font-size:8.5pt;
font-family:"Arial","sans-serif";color:#0000A0'>I <a href="http://www.bvhis.com">www.bvhis.com</a> I
Hartford ● New Haven ● Boston</span></strong><span style='color:gray'><o:p></o:p></span></p>
</div>
<div>
<p class=MsoNormal align=center style='text-align:center'><hr size=2
width="100%" align=center tabindex=-1> <o:p></o:p></p>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>
equest-users-bounces@lists.onebuilding.org
[mailto:equest-users-bounces@lists.onebuilding.org] <b>On Behalf Of </b>Nick
Caton<br>
<b>Sent:</b> Wednesday, November 03, 2010 11:03 AM<br>
<b>To:</b> Carol Gardner; equest-users@lists.onebuilding.org<br>
<b>Subject:</b> Re: [Equest-users] Chiller Curves (oh boy!)</span><o:p></o:p></p>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Thanks for the response Carol!<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>That 120% load case is what I’m getting at – let me try to
explain a little further:<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>In the DOE2 help files, the vocabulary for centrifugal chillers
is “design capacity” and “maximum capacity,” where “design” means the capacity
at the rated or designed conditions (at which you define / specify your
chiller), and “maximum” means the capacity the chiller is really capable of
under the same conditions if it runs balls-out (maximum power to the
refrigerant drive).<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>The help file excerpt I copied below with the red line is pretty
explicitly telling us to normalize the part load values to the <u>maximum</u>
capacity for centrifugal chillers. I’ve highlighted a second line for
clarity. The EDR guidelines I linked below are saying you can instead
normalize to the <u>design</u> capacity for the EIR-PLR curve if that’s all
your field measurements or manufacturer rep can provide.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>I’m asking – are both approaches right? <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>My first and second questions are kinda tied together… How would
choosing to normalize to either the maximum or design conditions affect how we
should handle the DESIGN-PLR ratio, if at all?<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>~Nick.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><img border=0 width=119 height=37
id="Picture_x005f_x005f_x005f_x005f_x005f_x005f_x005f_x0020_1"
src="cid:image003.jpg@01CB7C2B.4A52A800" alt="cid:489575314@22072009-0ABB"></span><b><span
style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p> </o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'>NICK CATON, E.I.T.</span></b><b><span style='font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><span style='font-size:7.5pt;font-family:"Calibri","sans-serif";
color:#CC9900'>PROJECT ENGINEER</span><span style='font-size:7.5pt;color:#CC9900'><o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>25501 west valley parkway<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>olathe ks 66061<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>direct 913 344.0036<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>fax 913 345.0617<o:p></o:p></span></p>
<p class=MsoNormal><i><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>Check out our new web-site @ </span></i><span style='font-size:
11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><a
href="www.smithboucher.com" title="blocked::www.smithboucher.com"><span
style='font-size:10.0pt'>www.smithboucher.com</span></a></span><u><span
style='font-size:10.0pt;font-family:"Calibri","sans-serif";color:blue'> </span></u><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> Carol Gardner
[mailto:cmg750@gmail.com] <br>
<b>Sent:</b> Tuesday, November 02, 2010 10:04 PM<br>
<b>To:</b> Nick Caton<br>
<b>Cc:</b> equest-users@lists.onebuilding.org<br>
<b>Subject:</b> Re: [Equest-users] Chiller Curves (oh boy!)<o:p></o:p></span></p>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<p class=MsoNormal style='margin-bottom:12.0pt'>Let me take a crack at this. If
by design capacity you mean the chiller running at 100% load, you would create
the curve(s) by normalizing around your ARI design conditions i.e. the PLR
curve would be 1.0 at this point, call it ARI Cap and the other points would be
90% Cap/ARI Cap, 80% Cap/ARI Cap, etc. The same would go for your temp curves.
If, however, your chiller is operating at 120%, or some such other level, I
would normalize the curve around the ARI design conditions of the chiller at
120%. I had to do this for a VRV hp that was selected at the 120% design
condition.<br>
<br>
I find this from the DOE2 manual the most helpful:<o:p></o:p></p>
<div style='border-top:solid #999999 1.0pt;border-left:none;border-bottom:solid #999999 1.0pt;
border-right:none;padding:0in 0in 0in 0in' id=nsbanner>
<div id=TitleRow>
<div id=ienav>
<p class=d2hmainlinknav> <o:p></o:p></p>
</div>
</div>
</div>
<div id=nstext>
<div id="d2h_breadcrumbs">
<p class=MsoNormal><a href="volume2dictionary.htm">Volume 2: Dictionary</a><span
class=d2hbreadcrumbslinkseparator> > </span><a href="hvaccomponents.htm">HVAC
Components</a><span class=d2hbreadcrumbslinkseparator> > </span><a
href="curvefit.htm"><span style='color:white;background:#316AC5'>CURVE</span>-<span
style='color:white;background:#316AC5'>FIT</span></a><span
class=d2hbreadcrumbslinkseparator> > </span><a href="inputtypedata.htm">INPUT-TYPE
= DATA</a><o:p></o:p></p>
</div>
<h5>INDEPENDENT-2<o:p></o:p></h5>
<p class=MsoBodyText>Used for all <span style='color:white;background:#316AC5'>curves</span>
having two independent variables. A list of up to twenty values of the second
independent variable. The number of values should be the same as for DEPENDENT.<o:p></o:p></p>
<p class=MsoBodyText><b><span style='font-family:"Arial","sans-serif"'>Example
1</span></b>: defining a <span style='color:white;background:#316AC5'>curve</span>
by inputting a set of data points.<o:p></o:p></p>
<p class=MsoBodyText>A packaged system (PZS) has cooling performance
significantly different from that used in the default model. The
manufacturer lists the data shown in Table 46, for cooling capacity, at 2000
cfm design air flow rate, as a function of outside dry-bulb temperature and
entering wet-bulb temperature.<o:p></o:p></p>
<p class=MsoCaption><a name="_Ref490744859"></a><a name="_Ref490744804"></a>Table
46 Cooling capacity (kBtu/hr) vs. temperature<o:p></o:p></p>
<div style='margin-top:2.0pt;margin-bottom:2.0pt'>
<div align=center>
<table class=MsoNormalTable border=0 cellspacing=0 cellpadding=0
style='border-collapse:collapse'>
<tr style='page-break-inside:avoid'>
<td width=96 rowspan=2 valign=top style='width:1.0in;border:solid windowtext 1.0pt;
background:aqua;padding:0in 5.4pt 0in 5.4pt;background-position-x:0%;
background-position-y:0%;background-attachment:scroll'>
<p class=tabledata align=center style='margin-top:0in;text-align:center'><b>Outside<br>
Dry-bulb</b><o:p></o:p></p>
</td>
<td width=288 colspan=3 valign=top style='width:3.0in;border-top:solid windowtext 1.0pt;
border-left:none;border-bottom:none;border-right:solid windowtext 1.0pt;
background:aqua;padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color -moz-use-text-color;
background-position-x:0%;background-position-y:
0%;background-attachment:
scroll'>
<p class=tabledata align=center style='text-align:center'><b>Entering
Wet-bulb</b><o:p></o:p></p>
</td>
</tr>
<tr style='page-break-inside:avoid'>
<td width=96 valign=top style='width:1.0in;border:none;border-bottom:solid windowtext 1.0pt;
background:aqua;padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color -moz-use-text-color windowtext;
background-position-x:0%;background-position-y:
0%;background-attachment:
scroll'>
<p class=tabledata align=center style='text-align:center'><b>72F</b><o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-bottom:solid windowtext 1.0pt;
background:aqua;padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color -moz-use-text-color windowtext;
background-position-x:0%;background-position-y:
0%;background-attachment:
scroll'>
<p class=tabledata align=center style='text-align:center'><b>67F</b><o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border-top:none;border-left:none;
border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;
background:aqua;padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext windowtext -moz-use-text-color;
background-position-x:0%;background-position-y:
0%;background-attachment:
scroll'>
<p class=tabledata align=center style='text-align:center'><b>62F</b><o:p></o:p></p>
</td>
</tr>
<tr>
<td width=96 valign=top style='width:1.0in;border-top:none;border-left:solid windowtext 1.0pt;
border-bottom:none;border-right:solid windowtext 1.0pt;padding:0in 5.4pt 0in 5.4pt;
border-color:-moz-use-text-color windowtext'>
<p class=tabledata align=center style='text-align:center'>85F<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>69<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>65<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-right:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext -moz-use-text-color -moz-use-text-color'>
<p class=tabledata align=center style='text-align:center'>60<o:p></o:p></p>
</td>
</tr>
<tr>
<td width=96 valign=top style='width:1.0in;border-top:none;border-left:solid windowtext 1.0pt;
border-bottom:none;border-right:solid windowtext 1.0pt;padding:0in 5.4pt 0in 5.4pt;
border-color:-moz-use-text-color windowtext'>
<p class=tabledata align=center style='text-align:center'>95F<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>68<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>63 (ARI)<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-right:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext -moz-use-text-color -moz-use-text-color'>
<p class=tabledata align=center style='text-align:center'>57<o:p></o:p></p>
</td>
</tr>
<tr>
<td width=96 valign=top style='width:1.0in;border-top:none;border-left:solid windowtext 1.0pt;
border-bottom:none;border-right:solid windowtext 1.0pt;padding:0in 5.4pt 0in 5.4pt;
border-color:-moz-use-text-color windowtext'>
<p class=tabledata align=center style='text-align:center'>105F<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>65<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>60<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-right:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext -moz-use-text-color -moz-use-text-color'>
<p class=tabledata align=center style='text-align:center'>53<o:p></o:p></p>
</td>
</tr>
<tr>
<td width=96 valign=top style='width:1.0in;border:solid windowtext 1.0pt;
border-top:none;padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext windowtext'>
<p class=tabledata align=center style='text-align:center'>115F<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-bottom:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color -moz-use-text-color windowtext'>
<p class=tabledata align=center style='text-align:center'>62<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-bottom:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color -moz-use-text-color windowtext'>
<p class=tabledata align=center style='text-align:center'>55<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border-top:none;border-left:none;
border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext windowtext -moz-use-text-color'>
<p class=tabledata align=center style='margin-bottom:0in;margin-bottom:.0001pt;
text-align:center'>49<o:p></o:p></p>
</td>
</tr>
</table>
</div>
</div>
<p class=MsoBodyText> <o:p></o:p></p>
<p class=MsoBodyText>In this example the independent variables are the entering
wet-bulb temperature and the outside dry-bulb temperature. Because there are
two independent variables and they have units of temperature, we input a <span
style='color:white;background:#316AC5'>curve</span> of TYPE BI-QUADRATIC-T
using the given data points. The dependent variable is not the cooling capacity
listed in the table but rather the cooling capacity divided by the cooling
capacity at the ARI rating point (95 F outside dry-bulb and 67 F entering
wet-bulb). In other words, the capacities should be normalized to the ARI
rating point., as shown in Table 47<o:p></o:p></p>
<p class=MsoCaption><a name="_Ref490745029">Table </a>47 Normalized
capacity vs. temperature<o:p></o:p></p>
<div style='margin-top:2.0pt;margin-bottom:2.0pt'>
<div align=center>
<table class=MsoNormalTable border=0 cellspacing=0 cellpadding=0
style='border-collapse:collapse'>
<tr style='page-break-inside:avoid'>
<td width=96 rowspan=2 valign=top style='width:1.0in;border:solid windowtext 1.0pt;
background:aqua;padding:0in 5.4pt 0in 5.4pt;background-position-x:0%;
background-position-y:0%;background-attachment:scroll'>
<p class=tabledata align=center style='margin-top:0in;text-align:center'><b>Outside<br>
Dry-bulb</b><o:p></o:p></p>
</td>
<td width=288 colspan=3 valign=top style='width:3.0in;border-top:solid windowtext 1.0pt;
border-left:none;border-bottom:none;border-right:solid windowtext 1.0pt;
background:aqua;padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color -moz-use-text-color;
background-position-x:0%;background-position-y:
0%;background-attachment:
scroll'>
<p class=tabledata align=center style='text-align:center'><b>Entering
Wet-bulb</b><o:p></o:p></p>
</td>
</tr>
<tr style='page-break-inside:avoid'>
<td width=96 valign=top style='width:1.0in;border:none;border-bottom:solid windowtext 1.0pt;
background:aqua;padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color -moz-use-text-color windowtext;
background-position-x:0%;background-position-y:
0%;background-attachment:
scroll'>
<p class=tabledata align=center style='text-align:center'><b>72F</b><o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-bottom:solid windowtext 1.0pt;
background:aqua;padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color -moz-use-text-color windowtext;
background-position-x:0%;background-position-y:
0%;background-attachment:
scroll'>
<p class=tabledata align=center style='text-align:center'><b>67F</b><o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border-top:none;border-left:none;
border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;
background:aqua;padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext windowtext -moz-use-text-color;
background-position-x:0%;background-position-y:
0%;background-attachment:
scroll'>
<p class=tabledata align=center style='text-align:center'><b>62F</b><o:p></o:p></p>
</td>
</tr>
<tr>
<td width=96 valign=top style='width:1.0in;border-top:none;border-left:solid windowtext 1.0pt;
border-bottom:none;border-right:solid windowtext 1.0pt;padding:0in 5.4pt 0in 5.4pt;
border-color:-moz-use-text-color windowtext'>
<p class=tabledata align=center style='text-align:center'>85F<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>1.095<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>1.032<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-right:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext -moz-use-text-color -moz-use-text-color'>
<p class=tabledata align=center style='text-align:center'>0.952<o:p></o:p></p>
</td>
</tr>
<tr>
<td width=96 valign=top style='width:1.0in;border-top:none;border-left:solid windowtext 1.0pt;
border-bottom:none;border-right:solid windowtext 1.0pt;padding:0in 5.4pt 0in 5.4pt;
border-color:-moz-use-text-color windowtext'>
<p class=tabledata align=center style='text-align:center'>95F<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>1.079<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>1.0 (ARI)<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-right:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext -moz-use-text-color -moz-use-text-color'>
<p class=tabledata align=center style='text-align:center'>0.905<o:p></o:p></p>
</td>
</tr>
<tr>
<td width=96 valign=top style='width:1.0in;border-top:none;border-left:solid windowtext 1.0pt;
border-bottom:none;border-right:solid windowtext 1.0pt;padding:0in 5.4pt 0in 5.4pt;
border-color:-moz-use-text-color windowtext'>
<p class=tabledata align=center style='text-align:center'>105F<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>1.032<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;padding:0in 5.4pt 0in 5.4pt'>
<p class=tabledata align=center style='text-align:center'>0.952<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-right:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext -moz-use-text-color -moz-use-text-color'>
<p class=tabledata align=center style='text-align:center'>0.841<o:p></o:p></p>
</td>
</tr>
<tr>
<td width=96 valign=top style='width:1.0in;border:solid windowtext 1.0pt;
border-top:none;padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext windowtext'>
<p class=tabledata align=center style='text-align:center'>115F<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-bottom:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color -moz-use-text-color windowtext'>
<p class=tabledata align=center style='text-align:center'>0.984<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border:none;border-bottom:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color -moz-use-text-color windowtext'>
<p class=tabledata align=center style='text-align:center'>0.873<o:p></o:p></p>
</td>
<td width=96 valign=top style='width:1.0in;border-top:none;border-left:none;
border-bottom:solid windowtext 1.0pt;border-right:solid windowtext 1.0pt;
padding:0in 5.4pt 0in 5.4pt;border-color:-moz-use-text-color windowtext windowtext -moz-use-text-color'>
<p class=tabledata align=center style='margin-bottom:0in;margin-bottom:.0001pt;
text-align:center'>0.778<o:p></o:p></p>
</td>
</tr>
</table>
</div>
</div>
<p class=MsoBodyText> <o:p></o:p></p>
<p class=MsoBodyText>The <span style='color:white;background:#316AC5'>CURVE</span>-<span
style='color:white;background:#316AC5'>FIT</span> input will look like the
following:<o:p></o:p></p>
<p class=doe-2input>CAP-<span style='color:white;background:#316AC5'>CURVE</span>-1
= <span style='color:white;background:#316AC5'>CURVE</span>-<span
style='color:white;background:#316AC5'>FIT</span><br>
TYPE
= BI-QUADRATIC-T<br>
INPUT-TYPE = DATA<br>
DEPENDENT =
(1.000,1.079,0.905,1.032,0.952,0.841,<br>
0.984,0.873,0.778,1.095,1.032,0.952) ..<br>
IN-TEMP1 =
( 67, 72, 62, 72,
67, 62,<br>
72, 67, 62,
72, 67, 62) ..<br>
IN-TEMP2 =
( 95, 95, 95, 105, 105,
105,<br>
115, 115, 115,
85 85, 85) ..<o:p></o:p></p>
<p class=MsoBodyText><b><span style='font-family:"Arial","sans-serif"'>Example
2:</span></b> Defining a <span style='color:white;background:#316AC5'>curve</span>
by inputting coefficients<o:p></o:p></p>
<p class=MsoBodyText>We want a furnace to have a constant efficiency as a
function of part load. To do this we must replace the default FURNACE-HIR-FPLR
with a <span style='color:white;background:#316AC5'>curve</span> that will give
a constant efficiency. The <span style='color:white;background:#316AC5'>curve</span>
TYPE is QUADRATIC in the part load ratio (PLR). PLR correction <span
style='color:white;background:#316AC5'>curves</span> are always multiplied by
the unit capacity, not the load, to obtain the energy (fuel or electricity)
use. Thus the <span style='color:white;background:#316AC5'>curve</span> we want
is: 0.0 + 1.0*PLR + 0.0*PLR*PLR. The input will look like:<o:p></o:p></p>
<p class=doe-2input>New-Furnace-HIR-fPLR = <span style='color:white;background:
#316AC5'>CURVE</span>-<span style='color:white;background:#316AC5'>FIT</span><br>
TYPE
= QUADRATIC<br>
INPUT-TYPE = COEFFICIENTS<br>
COEFFICIENTS = (0.0,1.0,0.0) ..<o:p></o:p></p>
<p class=MsoBodyText>Then in the SYSTEM command we include:<o:p></o:p></p>
<p class=doe-2input> FURNACE-HIR-FPLR = New-Furnace-HIR-fPLR<o:p></o:p></p>
</div>
<p class=MsoNormal style='margin-bottom:12.0pt'><o:p> </o:p></p>
<div>
<p class=MsoNormal>On Tue, Nov 2, 2010 at 3:21 PM, Nick Caton <<a
href="mailto:ncaton@smithboucher.com">ncaton@smithboucher.com</a>> wrote:<o:p></o:p></p>
<div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='color:#1F497D'>Hi everyone!</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='color:#1F497D'> </span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='color:#1F497D'>I think I have <u>finally</u> wrapped my mind completely
around custom chiller performance curves for a centrifugal VSD chiller. I’ve
got a few specific questions now that I’m on the other side of the fence:</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='color:#1F497D'> </span><o:p></o:p></p>
<p><span style='color:#1F497D'>1.</span><span style='font-size:7.0pt;
color:#1F497D'> </span><span
style='color:#1F497D'>Is it necessary for the data points of a part load
efficiency curve (EIR-FPLR&dT in my case) to originate from data with a 1.0
(100%) PLR ratio corresponding to a maximum vs. a design load capacity?
From what I gather in <a
href="http://www.energydesignresources.com/Portals/0/documents/DesignGuidelines/EDR_DesignGuidelines_%20HVAC_Simulation.pdf"
target="_blank">the EDR reference</a> (re: “Method 2” on PDF page 32/65), this
curve can be generated using part-load readings assuming a <u>design</u>
capacity at the 100% loading mark… but the DOE2 help entry for “EIR-FPLR” seems
to suggest otherwise (copied below – see highlighted line).</span><o:p></o:p></p>
<p><span style='color:#1F497D'>2.</span><span style='font-size:7.0pt;
color:#1F497D'> </span><span
style='color:#1F497D'>If the above part load efficiency curve is created based
on data where the 100% loading point corresponds to the maximum (not design)
capacity, should “DESIGN-PLR” (the ratio of design to maximum capacity) be set
to 1.00 and the capacity of the chiller be specified at its maximum (not design)
for the design/rated conditions? As I write this question it sounds like
I’m chasing my tail – someone straighten me out =)!</span><o:p></o:p></p>
<p><span style='color:#1F497D'>3.</span><span style='font-size:7.0pt;
color:#1F497D'> </span><span
style='color:#1F497D'>When you veterans finish a project with sets of custom
performance curves, do you have any suggestions for a naming scheme for future
reference/re-use? I’m currently thinking to keep the curves grouped in an
.inp snippet I for importing along with an equipment cutsheet… but I’m certain
I’ll forget the all the details as quickly as humanly possible when this project
is behind me…</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='color:#1F497D'> </span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto;
margin-left:.25in'><span style='color:#1F497D'> ~Nick</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='color:#1F497D'> </span><o:p></o:p></p>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='color:#1F497D'><img border=0 width=119 height=37 id="_x0000_i1031"
src="cid:image003.jpg@01CB7C2B.4A52A800" alt="cid:489575314@22072009-0ABB"></span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='color:#2D4D5E'> </span></b><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='color:#2D4D5E'>NICK CATON, E.I.T.</span></b><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:7.5pt;color:#CC9900'>PROJECT ENGINEER</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:#2D4D5E'>25501 west valley parkway</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:#2D4D5E'>olathe ks 66061</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:#2D4D5E'>direct 913 344.0036</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:#2D4D5E'>fax 913 345.0617</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><i><span
style='font-size:10.0pt;color:#2D4D5E'>Check out our new web-site @ </span></i><span
style='color:#1F497D'><a href="http://www.smithboucher.com" target="_blank"
title="blocked::www.smithboucher.com"><span style='font-size:10.0pt'>www.smithboucher.com</span></a></span><u><span
style='font-size:10.0pt;color:blue'> </span></u><o:p></o:p></p>
</div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='font-size:10.0pt'>EIR-FPLR</span></b><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>Takes
the U-name of a curve that adjusts the electric input ratio as a function of<o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto;
margin-left:.5in'><span style='font-family:Symbol'>· </span><u>The part load
ratio (PLR)</u> – The PLR is defined as the ratio of the hourly load to
the hourly capacity; Load / Cap<sub>hour</sub><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto;
margin-left:.5in'><span style='font-family:Symbol'>· </span><u>The
evaporator/condenser dT</u> - The temperature differential between the
condenser and leaving chilled-water. The meaning of the condenser
temperature varies according to condenser type. <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto;
margin-left:2.7pt'>For most chillers, the dT has a relatively small effect on
part-load performance. However, for variable-speed centrifugal chillers, the
effect of dT is as important as the PLR. This is because the pressure
rise across the impeller is proportional to the square of the impeller’s speed.
Unless some form on condenser temperature relief is employed to reduce the
temperature (and pressure) differential across the chiller at part load, the
performance of a variable-speed chiller may not be significantly different than
that of a constant-speed chiller.<o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>To
model power consumption as a function of the PLR only, use a CURVE-FIT of TYPE
= QUADRATIC or CUBIC. To model as a function of both PLR and dT, use a
BI-QUADRATIC-RATIO&DT curve. <b><span style='color:red'>The curve must be
normalized to 1.0 at full load and the rated temperature differential. <o:p></o:p></span></b></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='color:red'>Note that, for centrifugal chillers, ‘full load’ is defined
as the ‘maximum capacity’, not the ‘design capacity’.</span></b> Refer to the
DESIGN-PLR keyword for more information.<o:p></o:p></p>
<p style='margin-bottom:12.0pt'> <o:p></o:p></p>
</div>
</div>
<p class=MsoNormal style='margin-bottom:12.0pt'><br>
_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org"
target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send a blank message to <a
href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><o:p></o:p></p>
</div>
<p class=MsoNormal><br>
<br clear=all>
<br>
-- <br>
Carol Gardner PE<o:p></o:p></p>
</div>
</body>
</html>