<HTML xmlns="http://www.w3.org/TR/REC-html40" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:v="urn:schemas-microsoft-com:vml" xmlns:w="urn:schemas-microsoft-com:office:word"><head><META content="text/html; charset=koi8-r" http-equiv="Content-Type">
<STYLE><!-- /* Style Definitions */ p.72ef503a-27c7-4e95-8e06-4a4b3d9f1534, li.72ef503a-27c7-4e95-8e06-4a4b3d9f1534, div.72ef503a-27c7-4e95-8e06-4a4b3d9f1534, table.72ef503a-27c7-4e95-8e06-4a4b3d9f1534Table {margin:0cm; margin-bottom:.0001pt;}div.Section1 {page:Section1;}--></STYLE>
<meta content="text/html; charset=koi8-r" http-equiv=Content-Type>
<meta content="Microsoft Word 12 (filtered medium)" name=Generator>
<style>
<!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:Consolas;
panose-1:2 11 6 9 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
color:black;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";
color:black;}
pre
{mso-style-priority:99;
mso-style-link:"HTML Preformatted Char";
margin:0in;
margin-bottom:.0001pt;
font-size:10.0pt;
font-family:"Courier New";
color:black;}
span.HTMLPreformattedChar
{mso-style-name:"HTML Preformatted Char";
mso-style-priority:99;
mso-style-link:"HTML Preformatted";
font-family:Consolas;
color:black;}
span.EmailStyle20
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:windowtext;}
span.EmailStyle21
{mso-style-type:personal;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.EmailStyle22
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:56.7pt 42.5pt 56.7pt 85.05pt;}
div.WordSection1
{page:WordSection1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head><BODY>
<P CLASS="72ef503a-27c7-4e95-8e06-4a4b3d9f1534">
<div class=WordSection1>
<p class=MsoNormal><span style='color:#1F497D'>Another option is to save your
model with a diff name, go into the wizard of your new model and create two
zones, one for the area below the second shell and one more for the surrounding
area. Set the HVAC system to create a system per zone so the program will
automatically create two plenums and associated roofs. Set mode to detailed, copy
the two plenum zones, spaces (and associated walls and roofs), and polygons
from the new model and replace the plenum in your original model with the new
plenums once the original model is in the detailed edit mode. Then, delete the
roof of the plenum under the second shell.<o:p></o:p></span></p>
<p class=MsoNormal><span style='color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='color:#1F497D'>This only works if your original
model has plenums, and only one plenum per floor. If you have a simple shape
or only a few zones, this may be over-kill. But, if your footprint has a lot
of vertices or you have a lot of zones that would otherwise need to be broken
up, this method may be a time saver.<o:p></o:p></span></p>
<p class=MsoNormal><span style='color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='color:#1F497D'>Jeremy<o:p></o:p></span></p>
<p class=MsoNormal><span style='color:#1F497D'><o:p> </o:p></span></p>
<div>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif";
color:windowtext'>From:</span></b><span style='font-size:10.0pt;font-family:
"Tahoma","sans-serif";color:windowtext'> Charles Land
[mailto:cland@geo-marine.com] <br>
<b>Sent:</b> Friday, October 29, 2010 6:19 AM<br>
<b>To:</b> Bruce Easterbrook; σΑΝΟΜ£ΤΟΧ νΙΘΑΙΜ<br>
<b>Cc:</b> equest-users@lists.onebuilding.org<br>
<b>Subject:</b> Re: [Equest-users] Different roof and floor.<o:p></o:p></span></p>
</div>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<p class=MsoNormal><span style='color:#1F497D'>I always use the roof and floor
designation in the wizard of below conditioned space and over conditioned
space. And then any area that is not directly under the second floor I
make it a separate shell with the appropriate roof. I suppose either
method would work, but if you have a lot of spaces it could become tedious
having to go through the construction of each one individually.<o:p></o:p></span></p>
<p class=MsoNormal><span style='color:#1F497D'><o:p> </o:p></span></p>
<div>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>
<p class=MsoNormal><b>From:</b> equest-users-bounces@lists.onebuilding.org
[mailto:equest-users-bounces@lists.onebuilding.org] <b>On Behalf Of </b>Bruce Easterbrook<br>
<b>Sent:</b> Friday, October 29, 2010 9:14 AM<br>
<b>To:</b> σΑΝΟΜ£ΤΟΧ νΙΘΑΙΜ<br>
<b>Cc:</b> equest-users@lists.onebuilding.org<br>
<b>Subject:</b> Re: [Equest-users] Different roof and floor.<o:p></o:p></p>
</div>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<p> One way is to make the zoning on the first floor line up with the
second floor foot print. This I think, is the best way if the second
floor is a complex shape. The addition of a roof or it's deletion can be
geometrically tricky to do if it spans only part of a zone. I have found
lining up the zones with the foot print an easier solution. You may have
to add a few extra zones to get the matching shape. You delete the roof
under the foot print. If the zoning doesn't match your HVAC zones you can
adjust the zone grouping so that it does. Turn any interior walls into
air walls if they don't actually exist on the first floor. You may also
have to adjust or delete the floor of the second story as the ceiling of the
first floor is floor of the second floor. Check through your layers to
make sure they are consistent with the actual construction. Make sure
your boundaries are referencing the proper adjacent zones. This is the
technique, and may not exactly match what you are doing, you will have to check
through everything to make sure everything is consistent.<br>
Bruce Easterbrook<br>
Abode Engineering<o:p></o:p></p>
<p class=MsoNormal><br>
On 29/10/2010 02:48 AM, σΑΝΟΜ£ΤΟΧ νΙΘΑΙΜ wrote: <o:p></o:p></p>
<p class=MsoNormal><span style='font-size:14.0pt'>Hi</span><o:p></o:p></p>
<p class=MsoNormal><span style='font-size:14.0pt'> </span><o:p></o:p></p>
<p class=MsoNormal><span style='font-size:14.0pt'>I have 2-storey building. The
1st storey in a plan is not like the 2nd one. That’s why I created 2
shells (one above the other). For the 1st storey I have created a roof (because
part of a ceiling is outside the building). And for the 2nd storey I have
created a floor. Parameters of the roof of 1st story and the floor of the 2nd
story are different! During the calculation the eQUEST will calculate Heat Flux
through the ceiling/floor. </span><o:p></o:p></p>
<p class=MsoNormal><span style='font-size:14.0pt'>How eQUST calculate it if
ceiling of the 1st storey is not the same as the floor of the 2nd storey?</span><o:p></o:p></p>
<p class=MsoNormal><span style='font-size:14.0pt'>If air condition in 1st and
2nd story same, this question not so important, but if condition has big
different - this question is very actual!</span><o:p></o:p></p>
<p class=MsoNormal> <o:p></o:p></p>
<p class=MsoNormal> <o:p></o:p></p>
<p class=MsoNormal style='margin-top:6.0pt'>Sincerely yours,<o:p></o:p></p>
<p class=MsoNormal style='margin-top:6.0pt'>Mikhail Samoletov<o:p></o:p></p>
<p class=MsoNormal>Chief engineer of<o:p></o:p></p>
<p class=MsoNormal><b>"Numerical Simulation Department"</b><o:p></o:p></p>
<p class=MsoNormal style='margin-top:6.0pt'><b>TECHNIQUE BUREAU</b><o:p></o:p></p>
<p class=MsoNormal>Cvetochnaya str, 25"Zh", 196084 St.Petersburg,
Russia<o:p></o:p></p>
<p class=MsoNormal style='margin-bottom:6.0pt'><a href="http://www.bt-comfort.ru">www.bt-comfort.ru</a><o:p></o:p></p>
<p class=MsoNormal>phone/fax +7 (812) 318-50-30<o:p></o:p></p>
<p class=MsoNormal>mob. +7 (931) 244-83-77<o:p></o:p></p>
<p class=MsoNormal> <o:p></o:p></p>
<pre><o:p> </o:p></pre><pre><o:p> </o:p></pre><pre>_______________________________________________<o:p></o:p></pre><pre>Equest-users mailing list<o:p></o:p></pre><pre><a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><o:p></o:p></pre><pre>To unsubscribe from this mailing list send a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><o:p></o:p></pre></div>
</P>
<P CLASS="72ef503a-27c7-4e95-8e06-4a4b3d9f1534"><FONT COLOR="#808080" FACE="Verdana" SIZE="1">This email message, including any attachments, is for the sole use of the intended recipient and may contain confidential, proprietary, and/or privileged information, as well as content subject to copyright and other intellectual laws. If you are not the intended recipient, you may not disclose, use, copy, or distribute the email message or its attachments. If you believe you have received this email message in error, please contact the sender by reply email, immediately delete this email and destroy copies.</FONT></P></BODY></HTML>