<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=KOI8-R" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
<p><font size="+1"><font face="Helvetica, Arial, sans-serif"> One
way is to make the zoning on the first floor line up with the
second floor foot print. This I think, is the best way if the
second floor is a complex shape. The addition of a roof or
it's deletion can be geometrically tricky to do if it spans
only part of a zone. I have found lining up the zones with
the foot print an easier solution. You may have to add a few
extra zones to get the matching shape. You delete the roof
under the foot print. If the zoning doesn't match your HVAC
zones you can adjust the zone grouping so that it does.</font></font>
<font size="+1" face="Helvetica, Arial, sans-serif">Turn any
interior walls into air walls if they don't actually exist on
the first floor. </font><font size="+1"><font face="Helvetica,
Arial, sans-serif">You may also have to adjust or delete the
floor of the second story as the ceiling of the first floor is
floor of the second floor. Check through your layers to make
sure they are consistent with the actual construction. Make
sure your boundaries are referencing the proper adjacent
zones. This is the technique, and may not exactly match what
you are doing, you will have to check through everything to
make sure everything is consistent.<br>
Bruce Easterbrook<br>
Abode Engineering<br>
</font></font></p>
<br>
On 29/10/2010 02:48 AM, σΑΝΟΜ£ΤΟΧ νΙΘΑΙΜ wrote:
<blockquote
cite="mid:A8EB83401734BB4CBC8A1455396DCD5B01EDCC6A@exch.hvac.spb.ru"
type="cite">
<meta http-equiv="Content-Type" content="text/html;
charset=KOI8-R">
<meta name="Generator" content="Microsoft Word 12 (filtered
medium)">
<style>
<!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;}
@page WordSection1
{size:612.0pt 792.0pt;
margin:2.0cm 42.5pt 2.0cm 3.0cm;}
div.WordSection1
{page:WordSection1;}
-->
</style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="WordSection1">
<p class="MsoNormal"><span style="font-size: 14pt;" lang="EN-US">Hi<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size: 14pt;" lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size: 14pt;" lang="EN-US">I
have 2-storey building. The 1st storey in a plan is not like
the 2nd one. That’s why I created 2 shells (one above the
other). For the 1st storey I have created a roof (because
part of a ceiling is outside the building). And for the 2nd
storey I have created a floor. Parameters of the roof of 1st
story and the floor of the 2nd story are different! During
the calculation the eQUEST will calculate Heat Flux through
the ceiling/floor.
<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size: 14pt;" lang="EN-US">How
eQUST calculate it if ceiling of the 1st storey is not the
same as the floor of the 2nd storey?<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size: 14pt;" lang="EN-US">If
air condition in 1st and 2nd story same, this question not
so important, but if condition has big different - this
question is very actual!<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal" style="margin-top: 6pt;"><span
style="font-family:
"Arial","sans-serif";" lang="EN-US">Sincerely
yours,<o:p></o:p></span></p>
<p class="MsoNormal" style="margin-top: 6pt;"><span
style="font-family:
"Arial","sans-serif";" lang="EN-US">Mikhail
Samoletov<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-family:
"Arial","sans-serif";" lang="EN-US">Chief
engineer of<o:p></o:p></span></p>
<p class="MsoNormal"><b><span style="font-size: 8pt;
font-family: "Arial","sans-serif";"
lang="EN-US">"Numerical Simulation Department"<o:p></o:p></span></b></p>
<p class="MsoNormal" style="margin-top: 6pt;"><b><span
style="font-family:
"Arial","sans-serif";" lang="EN-US">TECHNIQUE
BUREAU<o:p></o:p></span></b></p>
<p class="MsoNormal"><span style="font-size: 9pt; font-family:
"Arial","sans-serif";" lang="EN-US">Cvetochnaya
str, 25"Zh", 196084 St.Petersburg, Russia<o:p></o:p></span></p>
<p class="MsoNormal" style="margin-bottom: 6pt;"><span
lang="EN-US"><a class="moz-txt-link-abbreviated" href="http://www.bt-comfort.ru">www.bt-comfort.ru</a><o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size: 9pt; font-family:
"Arial","sans-serif";" lang="EN-US">phone/fax
+7 (812) 318-50-30<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-size: 9pt; font-family:
"Arial","sans-serif";">mob. +7 (931)
244-83-77</span><span style="font-size: 9pt; font-family:
"Arial","sans-serif";" lang="EN-US"><o:p></o:p></span></p>
<p class="MsoNormal"><o:p></o:p></p>
</div>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_______________________________________________
Equest-users mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send a blank message to <a class="moz-txt-link-abbreviated" href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
</blockquote>
</body>
</html>