<div dir="ltr"><font face="verdana,sans-serif">Folks, <br clear="all"></font><div dir="ltr"><font class="Apple-style-span" face="verdana, sans-serif">First up, thanks to Bill and David for answering my last question. </font>
</div><div dir="ltr"><font class="Apple-style-span" face="verdana, sans-serif">My follow up is this:</font></div><div dir="ltr"><font class="Apple-style-span" face="verdana, sans-serif"><br></font></div><div dir="ltr"><font class="Apple-style-span" face="verdana, sans-serif">I'm trying to model a separate outside air system with heat recovery. So I set it up so all systems take outside air from my OA system (defined first). But if I then try to add heat recovery to the OA system total energy (due to cooling and fans) goes up.</font></div>

<div dir="ltr"><font class="Apple-style-span" face="verdana, sans-serif"><br></font></div><div dir="ltr"><font class="Apple-style-span" face="verdana, sans-serif">I'm guessing that a factor in this is that the air goes to all the other systems but then doesn't come back to the original OA system. (How to you specify that?) Although, cooling loads should still go down since exhaust air, whose quantify I specified, is still cooler than outside air. </font></div>

<br>
<div>So, how do I show any saving with OA heat (or coolth) recovery, which I know will be huge?</div><div><br></div><div>thanks in advance.</div><div>Nick</div></div>