<font class="Apple-style-span" face="tahoma, sans-serif">Hi Folks!<br>

<p class="MsoNormal"> </p><p class="MsoNormal"><br></p>

<p class="MsoNormal">I've got assigned in one project in eQuest which
does not have LEED baseline model and I’ve to create it.</p>

<p class="MsoNormal">They have already done the model for incentive from the
local gas&electric company which is very detailed and it’s in ‘Detail mode’
in eQuest.</p>

<p class="MsoNormal">For the LEED baseline, I need to create windows 40% of the
wall area but here in the model everything is according to the design (more
than 40%windows)!</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">I don’t want to go every single window and re-size them! </p>

<p class="MsoNormal">Is there any shortcut way to reduce the window by multiplying
‘the’ fraction (40%/current window percent)?</p>

<p class="MsoNormal">To be specific, I am looking for some help using “if…then…else..if”
or any other kind of function; that way may be just creating a single global
parameter the window area can be reduced in a very less tedious way.</p>

<p class="MsoNormal">Is there any particular help-file to write parameter-codes
in eQuest?</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Hope you understand my question.</p>

<p class="MsoNormal">Thanks for your time.</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal"> </p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Best,</p><p class="MsoNormal">Aru</p></font>