Hello all,<br>
<br>
I'm officially stymied, I had encountered Error 1 before, so I went back
 to a previous build and modified a couple of things, I went through 5 
changes and all ran successfully (this was yesterday, when the sun was 
shining and the birds were singing). Right now, I can't get the models 
to run at all (which had been working yesterday), and I'm not sure where
 to fix the errors that show up in the BLD file.<br>
<br>
I've attached my .pd2 in case any generous soul can show me how to fix 
this issue and keep it from occurring again.<br>
<br>
 Thanks in advance,<br>
Philip<br>
<br clear="all">Philip Drader, B.A Sc, LEED AP HOMES<br>Sustainable Design Specialist<br>Mindscape Innovations<br>ph:519-744-3592x223<br><a href="mailto:pdrader@mi-group.ca">pdrader@mi-group.ca</a><br><a href="http://www.mi-group.ca">www.mi-group.ca</a><br>
<br>FROM THE HORIZONS OF THE MIND, BUILDING DREAMS INTO REALITIES<br><br>---<br>The content of this email is the confidential property of Mindscape Innovations (Mindscape) and shall not be copied, modified, retransmitted, or used for any purpose except with Mindscape's written authorization. If you are not the intended recipient, please destroy all copies and notify us immediately.<br>
<br><br>