Hi everyone,<div><br></div><div>We have the goal of simulating a ground source heat exchanger as an EEM.  eQuest's GSHP system looks useful and well-constructed, but we've just finished the grueling calibration process and find ourselves unable to create and apply the system in DDE mode. </div>

<div><br></div><div>We can create the individual components, but we're running into two problems: the first is the issue of creating capacity curves, or finding eQuest's default ones (which would be ideal).  The curves don't seem to be accessible through the DDE mode, as if eQuest generates them only if it's been told to through the wizard.</div>

<div><br></div><div>I created a dummy model and reverted to the wizard, so that I could cross-compare inputs, but many of the values, curves etc. that the wizard generated can't be selected or created when I try to work through the process manually.</div>

<div><br></div><div>I know that the first two steps are to create a circulation loop and a ground loop heat exchanger, but I'm at a loss as to what comes next, and how to assign the system to zones once I've completed it.  Can it really be that the only way to accurately simulate the technology is to go through the wizard mode?</div>

<div><br></div><div>Thanks for your help!</div><div><br></div><div>-Taylor Sharpe<br>Energy Modeler-in-Training<br></div>