good afternoon everyone,<br><br>We are modelling a 2 story multi-family structure in eQuest that contains four 3 bedroom apartments side by side. After simulating the model, we have found that the eQuest estimate for TOTAL gas consumption (space heating + DHW + misc. equipment) is very close to our spreadsheet calculation. The model indicates a total annual gas consumption of 413.14 Million Btu's. We calculated 414.01 Million Btu's. Very close! However, the proportions of Btu's dedicated to space heating, DHW, and misc equipment is very different in our eQuest model and our spreadsheet. Does anyone know a simple way to manipulate the proportions of Btu's dedicated to each of these three categories without affecting the TOTAL annual gas consumption which is nearly dead on? We would like to divy it up based on our calculated usage patterns. We understand that this might be accomplished by adjusting the numbers in the Space Heating/DHW boiler diagrams. Also, that changing the daily/weekly schedules might affect this. Are these the only ways to approach this or is there a more simple solution without having to crunch such numbers?<br>
<br>Thanks.<br><br>Vaughn Slovak<br>Architectural Designer<br>Synergy Design<br>p.845.255.1733<br>f.845.255.1694<br>