At the equipment level, you need to change the meter to reflect FM2, otherwise FM1 will record all information on energy usage for that piece of equipment. This is similar if you want to meter HVAC systems, zones or water systems separately.<br>
<br><div class="gmail_quote">On Thu, Jun 17, 2010 at 10:11 AM, Synergy Team <span dir="ltr"><<a href="mailto:synergydesignteam@gmail.com">synergydesignteam@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
We are developing an eQUEST model for a 10-story brick residential
tower. The boilers which provide space heat/DHW burn Fuel Oil #2 which
we have managed to link to a meter (FM1) and the reports reflect this.
However, we have added a new fuel meter (FM2) which needs to be
associated with the natural gas consumption of the stoves/ranges and
clothes dryers in the facility. When we run the reports, they do not
reflect any natural gas consumption. There are zeros across the board
for FM2 - Natural Gas in the BEPU and BEPS reports. Does anyone know
how to link the newly created meter (FM2) to reflect the N.G. used by
these appliances? <br>
<br>Regards,<br><br>Vaughn Slovak<br>Architectural Designer<br>Synergy Design<br>p.845.255.1733<br>f.845.255.1694<br>
<br>_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br><br clear="all"><br>-- <br>Rob Hudson<br>