<br>We are trying to perform an energy audit using eQuest 3-63 on a 2
Story multi-family structure located just north of New York City in
Westchester County. This particular building has four 3-bedroom
apartment units side by side each with it's own small boiler room which
contains a single natural gas burning instantaneous hot water boiler
serving both space heating as well as domestic hot water demand. This
is a standard system and I feel that eQUEST should have the capacity to
model such a system accurately. However, we have been unsuccessful thus
far in its modelling and simulation. Through trial and error we were
able to model a single diagram in the "water sided HVAC" window which
shows multiple coils (radiators) that are linked to the DHW Plant and
DHW Res Loop but were unable simulate the building performance due to
some error. I would expect to see a diagram that consists of a single
boiler (DHW Plant) with a closed loop to and from the radiators
(Multiple Coils) and an open loop running from the single boiler with
an arrow pointing out to space. Does anyone know a simple way to model
this type of basic system? Please let us know. Thanks.<br>
<br>Vaughn Slovak<br>Architectural Designer<br>Synergy Design<br>p. 845.255.1733<br>f. 845.255.1694<br>