Depends on how many shells you define. I never spend a lot of time in the wizard. I do almost everything in DD edit or directly in the .inp deck.<br><br><br><div class="gmail_quote">On Wed, Jun 2, 2010 at 9:25 PM, Bruce Easterbrook <span dir="ltr"><<a href="mailto:bruce5@bellnet.ca">bruce5@bellnet.ca</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">


  

<div bgcolor="#ffffff" text="#000000">
<font face="Times New Roman, Times, serif">    I have been running into
this for the last few days.  The answer is as far as I can tell you get
to define one wall and one roof type.  Page 2, create one of each by
layer, on page 3, select that as your type.  You will have to change
the different ones in the detailed edit mode.</font>  Make the rest in
detailed edit and paste them in.<br>
    This only applies to simple buildings.  The rule still applies on
complex buildings with different foot prints on different levels.  When
you do them it is best to carry lots of zones, delete items instead of
create from scratch, change items with links, as you progress upwards. 
You can group the zones back together later. Heat transfer areas,
layers, and exposure are most important at this point in the model.<div class="im"><br>
Bruce Easterbrook P.Eng.<br>
Abode Engineering<br>
<br></div><div class="im">
On 02/06/2010 03:35 PM, Paul Brooks wrote:
</div><blockquote type="cite"><div class="im">
  
  <div style="font-family: times new roman,new york,times,serif; font-size: 12pt;">
  <div>Question:  On screen 2 of 25, "Building Footprint" I had
selected the Zone Characterisitcs button, and for each zone attempted
to define the exterior walls and roof.  When I go to the spreadsheet
view, I find that the walls are defined by the information on screen 3
of 25, "Building Envelope Constructions".  the defined walls do show up
in the "Construcion" list.  I had assumed by defining walls as I had I
was golden.  I now realize I have to go to detailed edit mode to apply
the correct walls and roofs. </div>
  <div> </div>
  <div>Does anyone know 1) why the information i input does not
automatically become the construction, and 2) by defining walls this
way, have i inadvetantly screwed up my model?  </div>
  </div>
  <br>
  </div><pre><fieldset></fieldset>
_______________________________________________
Equest-users mailing list
<div class="im"><a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
  </div></pre>
</blockquote>
</div>

<br>_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br><br clear="all"><br>-- <br>Carol Gardner PE<br>
<div style="visibility: hidden; display: inline;" id="avg_ls_inline_popup"></div><style type="text/css">#avg_ls_inline_popup {  position:absolute;  z-index:9999;  padding: 0px 0px;  margin-left: 0px;  margin-top: 0px;  width: 240px;  overflow: hidden;  word-wrap: break-word;  color: black;  font-size: 10px;  text-align: left;  line-height: 13px;}</style>