<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=Content-Type content="text/html; charset=us-ascii">
<meta name=Generator content="Microsoft Word 12 (filtered medium)">
<!--[if !mso]>
<style>
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style>
<![endif]-->
<style>
<!--
/* Font Definitions */
@font-face
{font-family:"MS Mincho";
panose-1:2 2 6 9 4 2 5 8 3 4;}
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:"\@MS Mincho";
panose-1:2 2 6 9 4 2 5 8 3 4;}
@font-face
{font-family:"Stylus BT";
panose-1:2 14 4 2 2 2 6 2 3 4;}
@font-face
{font-family:Consolas;
panose-1:2 11 6 9 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
pre
{mso-style-priority:99;
mso-style-link:"HTML Preformatted Char";
margin:0in;
margin-bottom:.0001pt;
font-size:10.0pt;
font-family:"Courier New";}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"Balloon Text Char";
margin:0in;
margin-bottom:.0001pt;
font-size:8.0pt;
font-family:"Tahoma","sans-serif";}
p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph
{mso-style-priority:34;
margin-top:0in;
margin-right:0in;
margin-bottom:0in;
margin-left:.5in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
span.HTMLPreformattedChar
{mso-style-name:"HTML Preformatted Char";
mso-style-priority:99;
mso-style-link:"HTML Preformatted";
font-family:Consolas;}
span.EmailStyle19
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.BalloonTextChar
{mso-style-name:"Balloon Text Char";
mso-style-priority:99;
mso-style-link:"Balloon Text";
font-family:"Tahoma","sans-serif";}
.MsoChpDefault
{mso-style-type:export-only;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.Section1
{page:Section1;}
/* List Definitions */
@list l0
{mso-list-id:1724795347;
mso-list-type:hybrid;
mso-list-template-ids:-831898842 67698703 67698713 67698715 67698703 67698713 67698715 67698703 67698713 67698715;}
@list l0:level1
{mso-level-tab-stop:none;
mso-level-number-position:left;
text-indent:-.25in;}
ol
{margin-bottom:0in;}
ul
{margin-bottom:0in;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="2050" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=EN-US link=blue vlink=purple>
<div class=Section1>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Pasha,<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>I may be missing something, I think you may have incidentally
answered how this can be done without realizing it =)?<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l0 level1 lfo1'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>1.<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Define a roof construction to match the thermal
massing/conductive properties of the glass framing.<o:p></o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l0 level1 lfo1'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>2.<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Define and assign roof skylights (check all inputs against your
ceiling glass info) as required to match the percentage coverage (minus the
framing) of the glass for the construction. You can do this quickly in
the Wizards by defining % or define and locate with more precision in detailed.
<o:p></o:p></span></p>
<p class=MsoListParagraph style='text-indent:-.25in;mso-list:l0 level1 lfo1'><![if !supportLists]><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><span
style='mso-list:Ignore'>3.<span style='font:7.0pt "Times New Roman"'>
</span></span></span><![endif]><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>I don’t’ believe exact positioning on any given roof
section is necessary if you have no daylighting controls to model or elements
shading these skylights.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Thermals and daylighting controls should be accounted for and affected
correctly using skylights – if you have any building shades/elements
above the glass roof plane be sure to locate them and the skylights accurately
to model their shading effects correctly.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>In Lauren’s case with an irregular polygon, I don’t believe
you have any recourse but to specify a series of rectangles. I think you’ll
find however creating and positioning skylights in detailed to be easier than
you might think, if you haven’t tried already. I always suggest
saving often and separately when going through any detailed window relocations –
things can sometimes go awry if you have a frame falling outside the parent construction
boundaries, for example.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>~Nick<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><img width=119 height=37 id="Picture_x0020_1"
src="cid:image001.jpg@01CAED12.60FF51A0" alt="cid:489575314@22072009-0ABB"></span><b><span
style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p> </o:p></span></b></p>
<p class=MsoNormal><b><span style='font-size:11.0pt;font-family:"Stylus BT","sans-serif";
color:#2D4D5E'>NICK CATON, E.I.T.</span></b><b><span style='font-family:"Stylus BT","sans-serif";
color:#2D4D5E'><o:p></o:p></span></b></p>
<p class=MsoNormal><span style='font-size:7.5pt;font-family:"Calibri","sans-serif";
color:#CC9900'>PROJECT ENGINEER</span><span style='font-size:7.5pt;color:#CC9900'><o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>25501 west valley parkway<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>olathe ks 66061<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>direct 913 344.0036<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>fax 913 345.0617<o:p></o:p></span></p>
<p class=MsoNormal><i><span style='font-size:10.0pt;font-family:"Calibri","sans-serif";
color:#2D4D5E'>Check out our new web-site @ </span></i><span style='font-size:
11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><a
href="www.smithboucher.com" title="blocked::www.smithboucher.com"><span
style='font-size:10.0pt'>www.smithboucher.com</span></a></span><u><span
style='font-size:10.0pt;font-family:"Calibri","sans-serif";color:blue'> </span></u><span
style='font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D'><o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>
equest-users-bounces@lists.onebuilding.org
[mailto:equest-users-bounces@lists.onebuilding.org] <b>On Behalf Of </b>Pasha
Korber-Gonzalez<br>
<b>Sent:</b> Thursday, May 06, 2010 11:27 AM<br>
<b>To:</b> Lauren Rosenthal<br>
<b>Cc:</b> equest-users@lists.onebuilding.org<br>
<b>Subject:</b> Re: [Equest-users] change roof construction to glass<o:p></o:p></span></p>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<div>
<p class=MsoNormal>Lauren,<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>I don't think you can do what you are trying to achieve in
eQuest/DOE2. There's a couple things to think about. You
could effectively assign the thermal properties of your roof construction to
that of your glazing (i.e. U-value, reflectance, etc.) but you will not be able
to simulate the solar gain properties or VLT unless the object is specified as
a window or skylight. If you go this route you will also not be able to
simulate daylight harvesting from the roof glass either. DOE2 needs to
know that it is a window or skylight in order for the daylighting controls to
work.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>I would suggest maybe 2 options to try: 1) You can input
skylights to cover the greatest percentage of your roof area that will fit
within the geometry that you describe and still get some amount of glass roof
effects accounted for in your simulation although we know it won;t be 100%
accurate for the proposed design. 2) you can do all of these thermal
effect calculations outside of eQuest and use your calculated data to integrate
these numbers with your simulation output---this is a much more tedious
approach and you will have to rely on your manual engineering analysis to
describe the anticipated thermal results that can't be simulated within the
program.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>Hope this helps.<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='margin-bottom:12.0pt'>Pasha<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>On Thu, May 6, 2010 at 10:16 AM, Lauren Rosenthal <<a
href="mailto:Lauren.Rosenthal@arup.com">Lauren.Rosenthal@arup.com</a>>
wrote:<o:p></o:p></p>
<div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>All,<o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>Does
anyone know how to change an existing roof in detailed mode of the model to a
glass roof? It is an irregular shape (from a polygon) and therefore creating
child windows all over it will be very hard because they will not fit in the
shape very easily as rectangular windows. Can I change its properties in the
.inp file?<o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>Thanks
in advance,<o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:gray'>____________________________________</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:gray'>Lauren Rosenthal</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:gray'>Mechanical Engineer</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='color:gray'> </span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:gray'>Los Angeles CA</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
</div>
<pre>____________________________________________________________<br>
Electronic mail messages entering and leaving Arup business<br>
systems are scanned for acceptability of content and viruses<o:p></o:p></pre></div>
<p class=MsoNormal style='margin-bottom:12.0pt'><br>
_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org"
target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send a blank message to <a
href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><o:p></o:p></p>
</div>
<p class=MsoNormal><o:p> </o:p></p>
</div>
</body>
</html>