<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.6000.17037" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Dear All,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>What would you choose as the minimum efficiency for
baseline modelling for the DX cooling (923 kW) of System Type 5 from Appendix G
(Packaged rooftop VAV with reheat)? I am looking at a model previously done by
someone else and the COP has been chose as 2.96, which could mean that they have
used Table 6.8.1A - Condensing units, air cooled. But I am not sure if this
should be correct.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV>Ömer Moltay, LEED AP<BR>Mimta Ltd.<BR>Hekimsuyu Cad. 559. Sk.
No:39<BR>34255 Kucukkoy Istanbul Turkey<BR>Tel: 90-212-617-2296<BR>Fax:
90-212-617-2297<BR><A href="http://www.mimtarch.com">www.mimtarch.com</A></DIV>
<DIV> </DIV>
<DIV>Sürdürülebilir Binalar Blog<BR><A
href="http://surdurulebilirbina.blogspot.com">http://surdurulebilirbina.blogspot.com</A></DIV>
<DIV> </DIV>
<DIV>Green Building in Turkey on LinkedIn<BR><A
href="http://www.linkedin.com/groups?gid=2278249">http://www.linkedin.com/groups?gid=2278249</A></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=varpiyush@gmail.com href="mailto:varpiyush@gmail.com">Piyush
Varma</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
title=equest-users@lists.onebuilding.org
href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, May 04, 2010 11:55
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [Equest-users] Queries</DIV>
<DIV><BR></DIV>Hi all,
<DIV><BR></DIV>
<DIV>I am an eQuest newbie and had 2 small queries which hopefully would be
answered.</DIV>
<DIV><BR></DIV>
<DIV>01. What's the logic behind eQuest giving positive (+ve) Cooling Loads
& (-ve) negative Heating Loads. (I made an Admittance Method Algorithm
& it gives me the opposite values, eQuest i.e. negative cooling loads
& +ve heating loads, have checked all sign convention...can't figure out
why? My algorithm simulates for Delhi's (India) climate predominantly, cooling
loads.</DIV>
<DIV><BR></DIV>
<DIV>02. I have asked this before...is there any library for data of
alternating solar gain factors, especially for Delhi, India. (As far as i
believe it does'nt take into account the alternating solar gain
factor...) </DIV>
<DIV><BR></DIV>
<DIV>hope these get resolved soon, thanks in advance.</DIV>
<DIV><BR></DIV>
<DIV>Regards,</DIV>
<DIV>Piyush</DIV>
<P>
<HR>
<P></P>_______________________________________________<BR>Equest-users mailing
list<BR>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org<BR>To
unsubscribe from this mailing list send a blank message to
EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG<BR></BLOCKQUOTE></BODY></HTML>