Michael,<br><br>IMHO, you were right in the first place: input the Btuh numbers for the <b>systems</b> using the heating and cooling tabs, <b>System</b> sizes are not zone inputs and I don't know how it was that you could even see any numbers on your zone screens. For my building that uses heat pumps, the sizes <b>only</b> show up on the Air-Side HVAC System screens under heating and cooling.<br>
<br>Now, others can agree or disagree with me. If anyone is willing to speak to total vs sensible please do as you will no doubt do it better than I.<br><br>Cheers,<br>Carol<br><br><div class="gmail_quote">On Mon, Apr 26, 2010 at 2:42 PM, M. Shields <span dir="ltr"><<a href="mailto:mshields@fstrategies.com">mshields@fstrategies.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">








<div link="blue" vlink="purple" lang="EN-US">

<div>

<p class="MsoNormal">Hey eQuesters,</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">I am trying to figure out where to enter the size of my heat
pump equipment in the detailed interface.  As far as I can tell there are
two places.  If I go under the “Air-Side HVAC” tab then all of
my systems are displayed on the left side in the component tree.  Each
system has two options I can right click on, for Example “EL1 Sys1 (PSZ)
(G.ENE1)” and “EL1 ENE Perim Zn (GENE.1)”, the second option
being a sub tab of the first.  When I right click on the main tab and go
to properties there are “cooling” and “heating” tabs
which both have options for Total Capacity, which I would assume is where I
should enter my system sizes.  I then found on the sub tab when you go to properties
on the first tab “Basic Specifications” there is a “Zone
Cooling and Heating” area at the bottom which also has Total Capacity,
which was not the same as what I entered in the first area.  Should these
match, if not does anyone know what the difference between these two is?</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Thanks,</p>

<p class="MsoNormal">Michael Shields </p>

<p class="MsoNormal"> </p>

</div>

</div>


<br>_______________________________________________<br>
Equest-users mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br><div style="visibility: hidden; display: inline;" id="avg_ls_inline_popup"></div><style type="text/css">#avg_ls_inline_popup {  position:absolute;  z-index:9999;  padding: 0px 0px;  margin-left: 0px;  margin-top: 0px;  width: 240px;  overflow: hidden;  word-wrap: break-word;  color: black;  font-size: 10px;  text-align: left;  line-height: 13px;}</style>