I am new to eQuest and spent a good part of yesterday modelling up my house in Houston.  I have gotten within 10% of my current energy usage with my current model and was looking to start analyzing proposed improvements and their energy consumption impacts.  My first to try was a radiant barrier in the attic and using the dropdown menus in the Schematic Wizard found it had very close to no effect at all on my projected energy consumption.  I ran into a 2007 paper titled "Comparative Testing of the Combined Radiant Barrier and Duct Models in the ESL’s Code-Compliant Simulation Model" by S. Kim that suggested that DOE-2.1 documentation recommends modeling the radiant barrier as an additional R-8.1 of insulation in the attic.  Is this effective at yielding similar results to a real life radiant barrier installation?<br>