<html><head><style type="text/css"><!-- DIV {margin:0px;} --></style></head><body><div style="font-family:arial, helvetica, sans-serif;font-size:10pt"><DIV>To eQuest Users,</DIV>
<DIV> </DIV>
<DIV>Good Day!</DIV>
<DIV> </DIV>
<DIV>We are generating unsual results with one of our model with regards to unmet load hours.</DIV>
<DIV> </DIV>
<DIV>Is it possible that in proposed design, all spaces (not even one space was below 100) to have 500+ unmet load hours each?</DIV>
<DIV>All the required inputs as per equipment schedule are already encoded in the model.</DIV>
<DIV>Seeing the sizes of the equipment in an engineering point of view were oversized by around 10% to 15%.</DIV>
<DIV>Even the baseline (though a little lower than the proposed) has unaccpetable unmet load hours.</DIV>
<DIV> </DIV>
<DIV>This could have been discussed before, but looking for this discussion in the forum with the right information we need may take a longer time.</DIV>
<DIV> </DIV>
<DIV>What are the usual/S.O.P procedures in counter-checking the model that we need to do to bring down the unmet load hours to acceptable level?</DIV>
<DIV>What parameters do we need to check and correct?</DIV>
<DIV> </DIV>
<DIV>We are in the final stage of our energy model, immediate and workable solutions that will be provided will be greatly appreciated.</DIV>
<DIV> </DIV>
<DIV>Thanks in advance.</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>Reniel</DIV>
<DIV> </DIV>
<DIV><BR> </DIV></div><br>
<hr size=1> <a href="http://sg.rd.yahoo.com/aa/mail/domainchoice/mail/signature/*http://mail.promotions.yahoo.com/newdomains/aa/"> New Email addresses available on Yahoo! </a> <br>
Get the Email name you've always wanted on the new @ymail and @rocketmail.<br>
Hurry before someone else does!</body></html>