Proj   "NANOOSE BAY fh-18MAR10-perimeter-core"  
   ProgramVersion = "eQUEST 3.63.6510"
   BDBaseVersion = 24
   ProductCode = "eQUEST"
   WeatherFile = "CWEC\Comox.bin"
   CreateDate = 1266972711
   ModDate = 1269106417
   RunDate = 1268955463
   LibraryFile = "eQ_Lib.dat"
   ActiveMode = 0
   InputModule = 3
   Address = "2471 Nanoose Rd"
   CityStateZip = "Nanoose Bay, BC"
   Owner = "Fire Hall"
   OwnerAddress = "2471 Nanoose Rd"
   OwnerCityStateZip = "Nanoose Bay, BC"
   Render3DObjtype[1] = 1
   Render3DObjtype[2] = 1
   Manip3DMethod = "Full Wire Frame (all components)"
   Background3D = "Black"
   UseCameraData = 1
   ClippingRange = ( 238.3, 598.671 )
   FocalPoint = ( 90.2117, 83.0501, 18.0293 )
   Position = ( 303.814, -200.409, 196.816 )
   ViewUpVector = ( 0, 0, 1 )
   ViewAngle = 30
   InterfaceMode = 1
   AllowWizard = 1
   NotProjFile = "NANOOSE BAY fh-18MAR10-perimeter-core"
   InputUnitsType = "English"
   OutputUnitsType = "English"
   PreviousName = "NANOOSE BAY fh-12MAR10"
   DetailedModelEdits = 1
   ProjTreeType = ( 0, 1, 1, 1, 1, 1 )
   ProjTreeID = ( 10000, 10410000, 10080000, 10480000, 10480000, 
                  10900001 )
   ProjTreeLabel = ( "Project:  'NANOOSE BAY fh-18MAR10-perimeter-core'", 
                     "EL1 Ground Flr", "EL1 West Perim Spc (G.W1)", 
                     "EL1 Sys1 (FC) (G.W1)", "EL1 Sys1 (FC) (G.W1)", 
                     "Custom Gas Uniform Blk1" )
   ..

MainWiz   "NANOOSE BAY fh-18MAR10-perimeter-core"  
   ProductCode = "eQUEST"
   WizardType = "Design Development"
   DebugID = 0
   AllowCustWinDoor = 1
   ScreenIDArrIdx = 6
   ScreenIDArrID = 250
   Coverage = "Canadian Locations"
   State = "British Columbia"
   Location = "Comox"
   ElecUtility = "- custom -"
   GasUtility = "- custom -"
   UserElecRate[1] = "Custom Elec Rate"
   UserFuelRate = "Custom Gas Rate"
   BldgType = "Office Bldg, Two Story"
   ActiveHoliday = "Christmas Day (celebrated)"
   HolidayChecked[2] = 0
   HolidayChecked[3] = 0
   HolidayChecked[4] = 0
   HolidayChecked[8] = 0
   HolidayChecked[11] = 0
   HolidayChecked[12] = 0
   HolidayChecked[13] = 0
   HolidayChecked[14] = 0
   HolidayChecked[15] = 0
   HolidayChecked[19] = 0
   SimulateBaseline = 1
   ..

ShellWiz   "OFFICE AREA"  
   ScreenIDArrIdx = 1
   ScreenIDArrID = 22
   GrossArea = 6082
   ShellPos_Specify = 0
   Footprint = "- custom -"
   FlrToFlr = 12.87
   FlrToCeiling = 10.56
   ZoningPattern = "Multi-Perimeter / Core"
   NumMCZnGrps = 0
   DiagLink = "Bldg Envelope & Loads 1 Diag Data"
   RoofBrdInsType = "4 in. polystyrene (R-20)"
   VertExtBrdInsType = "2 in. polyisocyanurate (R-14)"
   VertExtSecInsType = "- no batt -"
   VertExtIntInsType = "- no board insulation -"
   ZoningCurrent = 1
   NumFloorVertices = 6
   FloorVertX[1] = 26.9
   FloorVertX[2] = 26.9
   FloorVertX[3] = 74.2
   FloorVertX[4] = 74.2
   FloorVertX[5] = 55.6
   FloorVertX[6] = 55.6
   FloorVertY[1] = 102.6
   FloorVertY[2] = 42.5
   FloorVertY[3] = 42.5
   FloorVertY[4] = 113.1
   FloorVertY[5] = 113.1
   FloorVertY[6] = 102.55
   AdiabaticPercent[2] = 16
   AdiabaticPercent[3] = 98
   AdiabaticPercent[4] = 100
   AdiabaticX[2] = 29.7
   AdiabaticX[3] = 0
   AdiabaticHeight[2] = 12.8
   AdiabaticHeight[3] = 24.8
   AdiabaticCurrent = 1
   ZoneGroupsOK = 1
   DfltZnGrpName = ( "EL1 Underground Areas", "EL1 Ground Floor Core", 
                     "EL1 Ground Floor Perimeter", 
                     "EL1 Typical Floor(s) Core", 
                     "EL1 Typical Floor(s) Perimeter", 
                     "EL1 Top Floor Core", "EL1 Top Floor Perimeter" )
   CustomFootprint = 1
   CustomZoning = 0
   ActiveZoneIndex = 1
   CustomRoofZoning = -1
   ActiveRoofZoneIdx = 1
   FloorArea = 3037.31
   FloorPerimLen = 235.85
   LastFootprint = 1
   GTCCategory[1] = "Double Low-E"
   GTCCategory[2] = "- select another -"
   GlassTypeCode[1] = "Dbl Low-E (e2=.1) Tint 1/4in, 1/4in Air (2636)"
   WinFrameType[1] = "Alum w/ Brk, Fixed, Mtl Spacer"
   WinAreaSpecMethod = "Percent of Net Wall Area (floor to ceiling)"
   DoorType[1] = "Opaque"
   NumExtDoors2[1] = 0
   NumExtDoors4[1] = 2
   DoorWidth[1] = 3
   OpaqueDoorType[1] = "Steel, Polyurethane core w/ Brk"
   TypWindowWidth[1] = 4.5
   TypWindowWidth[2] = 4.5
   SkyZonesCurrent = 1
   SkyltZones[1] = 1
   SkyltZones[2] = 1
   SkyltZones[3] = 1
   SkyltZones[4] = 1
   SkyltZones[5] = 1
   SkyPosCurrent = 1
   DayZonesCurrent[1] = 1
   DayZonesCurrent[3] = 1
   DayltZones[1] = 1
   DayltZones[2] = 1
   DayltZones[3] = 1
   DayltZones[4] = 1
   DayltZones[5] = 0
   DayltZones[401] = 1
   DayltZones[402] = 1
   DayltZones[403] = 1
   DayltZones[404] = 1
   DayltZones[405] = 0
   WinDoorCurrent = 1
   DetailsCurrent = ( 1, 1, 1 )
   BDLNumDayltCtrls[1] = 0
   BDLNumDayltCtrls[2] = 0
   BDLNumDayltCtrls[3] = 0
   BDLNumDayltCtrls[4] = 0
   BDLNumDayltCtrls[5] = 0
   BDLNumDayltCtrls[401] = 0
   BDLNumDayltCtrls[402] = 0
   BDLNumDayltCtrls[403] = 0
   BDLNumDayltCtrls[404] = 0
   BDLNumDayltCtrls[405] = 0
   ActAreaType = ( "Classroom/Lecture", "Conference Room", 
                   "Office (General)", "Restrooms", 
                   "Storage (Conditioned)", 
                   "Kitchen and Food Preparation", "Corridor", 
                   "All Others" )
   PercentArea = ( 18, 17.5, 13.1, 9.2, 4.5, 7.1, 9.9, 20.7 )
   PrimFirstFloor[1] = 1
   PrimFirstFloor[2] = 1
   PrimFirstFloor[4] = 1
   PrimFirstFloor[5] = 1
   PrimFirstFloor[7] = 1
   PrimFirstFloor[8] = 1
   PrimTopFloor = ( 1, 1, 1, 1, 1, 1, 1, 1 )
   SeasonType[1] = "Typical Use"
   OpenSeas1[6] = "8 am"
   CloseSeas1[1] = "6 pm"
   CloseSeas1[6] = "6 pm"
   OccShape[1] = "EL1 Occup Profile (S1)"
   ILShape[1] = "EL1 InsLtg Profile (S1)"
   ELDayShapes = ( "EL1 ExtLtg DayShape (Jan)", 
                   "EL1 ExtLtg DayShape (Feb)", 
                   "EL1 ExtLtg DayShape (Mar)", 
                   "EL1 ExtLtg DayShape (Apr)", 
                   "EL1 ExtLtg DayShape (May)", 
                   "EL1 ExtLtg DayShape (Jun)", 
                   "EL1 ExtLtg DayShape (Jul)", 
                   "EL1 ExtLtg DayShape (Aug)", 
                   "EL1 ExtLtg DayShape (Sep)", 
                   "EL1 ExtLtg DayShape (Oct)", 
                   "EL1 ExtLtg DayShape (Nov)", 
                   "EL1 ExtLtg DayShape (Dec)" )
   OEShape[1] = "EL1 OffEq Profile (S1)"
   OEElecIntens[1] = 1
   OEElecIntens[2] = 0.5
   OEElecIntens[3] = 2
   MiscShape[1] = "EL1 Misc Profile (S1)"
   DHWShape[1] = "EL1 DHW Profile (S1)"
   DaylitAreaCurrent[1] = 1
   DaylitAreaCurrent[3] = 1
   RoofZoneErrorCode = 4
   ..

ShapeWiz   "EL1 InsLtg Profile (S1)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Jan)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Feb)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Mar)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Apr)"  
   ..

DayShape   "EL1 ExtLtg DayShape (May)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Jun)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Jul)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Aug)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Sep)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Oct)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Nov)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Dec)"  
   ..

ShapeWiz   "EL1 OffEq Profile (S1)"  
   ..

ShapeWiz   "EL1 Misc Profile (S1)"  
   ..

ShapeWiz   "EL1 DHW Profile (S1)"  
   ..

ShapeWiz   "EL1 Occup Profile (S1)"  
   ..

CustomZone   "Custom Zone 4"  
   NumVerts = 4
   X[1] = 26.9
   X[2] = 26.9
   X[3] = 41.9
   X[4] = 41.9
   Y[1] = 102.6
   Y[2] = 42.5
   Y[3] = 57.5
   Y[4] = 87.5738
   ..

CustomZone   "Custom Zone 5"  
   NumVerts = 4
   X[1] = 26.9
   X[2] = 74.2
   X[3] = 59.2
   X[4] = 41.9
   Y[1] = 42.5
   Y[2] = 42.5
   Y[3] = 57.5
   Y[4] = 57.5
   ..

CustomZone   "Custom Zone 9"  
   NumVerts = 5
   X[1] = 74.2
   X[2] = 74.2
   X[3] = 64.9
   X[4] = 64.9
   X[5] = 59.2
   Y[1] = 42.5
   Y[2] = 113.1
   Y[3] = 103.8
   Y[4] = 93.2338
   Y[5] = 57.5
   ..

CustomZone   "Custom Zone 10"  
   NumVerts = 7
   X[1] = 74.2
   X[2] = 55.6
   X[3] = 55.6
   X[4] = 26.9
   X[5] = 41.9
   X[6] = 64.9
   X[7] = 64.9
   Y[1] = 113.1
   Y[2] = 113.1
   Y[3] = 102.55
   Y[4] = 102.6
   Y[5] = 87.5738
   Y[6] = 93.2338
   Y[7] = 103.8
   ..

CustomZone   "Custom Zone 11"  
   NumVerts = 4
   X[1] = 41.9
   X[2] = 59.2
   X[3] = 64.9
   X[4] = 41.9
   Y[1] = 57.5
   Y[2] = 57.5
   Y[3] = 93.2338
   Y[4] = 87.5738
   ..

ZnGrpWiz   "EL1 Ground Floor Core"  
   ShortName = "GndCor"
   ..

ZnGrpWiz   "EL1 Ground Floor Perimeter"  
   ShortName = "GndPrm"
   ..

ZnGrpWiz   "EL1 Top Floor Core"  
   ShortName = "TopCor"
   ..

ZnGrpWiz   "EL1 Top Floor Perimeter"  
   ShortName = "TopPrm"
   ..

AdjWall   "Adjoining Wall 1"  
   ..

ShellWiz   "GARAGE"  
   ModelEnduse[3] = 1
   ScreenIDArrIdx = 0
   ScreenIDArrID = 15
   BldgType = "Unknown, Custom or Mixed Use"
   GrossArea = 4090
   ShellPos_Dir = "East"
   ShellPos_Dist = 0
   ShellPos_Specify = 0
   ShellMult = 1
   Footprint = "- custom -"
   FlrToFlr = 24.75
   FlrToCeiling = 21.78
   ZoningPattern = "Perimeter / Core"
   NumMCZnGrps = 0
   DiagLink = "EL2 Bldg Envelope & Loads 1 Diag Data"
   RoofBrdInsType = "4 in. polyisocyanurate (R-28)"
   VertExtBrdInsType = "3 in. polyurethane (R-18)"
   VertExtSecInsType = "- no batt -"
   VertExtIntInsType = "- no board insulation -"
   PerimInfil = 0.1
   ZoningCurrent = 1
   NumFloorVertices = 4
   FloorVertX[1] = 74.2
   FloorVertX[2] = 74.2
   FloorVertX[3] = 128
   FloorVertX[4] = 128.1
   FloorVertY[1] = 124.5
   FloorVertY[2] = 37.2
   FloorVertY[3] = 37.2
   FloorVertY[4] = 124.4
   AdiabaticPercent[1] = 100
   AdiabaticCurrent = 1
   ZoneGroupsOK = 1
   DfltZnGrpName = ( "EL2 Underground Areas", "EL2 Ground Floor Core", 
                     "EL2 Ground Floor Perimeter", 
                     "EL2 Typical Floor(s) Core", 
                     "EL2 Typical Floor(s) Perimeter", 
                     "EL2 Top Floor Core", "EL2 Top Floor Perimeter" )
   CustomFootprint = 1
   CustomZoning = 0
   ActiveZoneIndex = 2
   CustomRoofZoning = -1
   ActiveRoofZoneIdx = 1
   FloorArea = 4698.42
   FloorPerimLen = 282.2
   LastFootprint = 9
   OverhangOption = "None"
   GTCCategory[1] = "Double Low-E"
   GTCCategory[2] = "- select another -"
   GlassTypeCode[1] = "Dbl Low-E (e2=.1) Tint 1/4in, 1/4in Air (2636)"
   WinAssignSpcType[1] = "Multi-level"
   WinAssignSpcType[2] = "Multi-level"
   WinFrameType[1] = "Alum w/ Brk, Fixed, Mtl Spacer"
   WinAreaSpecMethod = "Percent of Gross Wall Area (floor to floor)"
   PercentGlassI3[1] = 18.6
   DoorType[1] = "Opaque"
   DoorType[2] = "Overhead"
   NumExtDoors1[1] = 0
   NumExtDoors1[2] = 0
   NumExtDoors2[1] = 1
   NumExtDoors2[2] = 0
   NumExtDoors3[1] = 3
   NumExtDoors3[2] = 0
   NumExtDoors4[1] = 0
   NumExtDoors4[2] = 3
   DoorWidth[1] = 3
   DoorWidth[2] = 14.2
   DoorHeight[2] = 13.6
   TypWindowWidth[1] = 14
   TypWindowWidth[2] = 14
   SkyZonesCurrent = 1
   SkyltZones[1] = 1
   SkyltZones[2] = 1
   SkyltZones[3] = 1
   SkyltZones[4] = 1
   SkyltZones[5] = 1
   SkyltZones[6] = 1
   SkyPosCurrent = 1
   DayZonesCurrent[3] = 1
   DayltZones[1] = 1
   DayltZones[2] = 1
   DayltZones[3] = 1
   DayltZones[4] = 1
   DayltZones[5] = 0
   DayltZones[401] = 1
   DayltZones[402] = 1
   DayltZones[403] = 1
   DayltZones[404] = 1
   DayltZones[405] = 0
   DayltZones[406] = 1
   WinDoorCurrent = 1
   DetailsCurrent = ( 1, 1, 1 )
   BDLNumDayltCtrls[1] = 0
   BDLNumDayltCtrls[2] = 0
   BDLNumDayltCtrls[3] = 0
   BDLNumDayltCtrls[4] = 0
   BDLNumDayltCtrls[5] = 0
   BDLNumDayltCtrls[401] = 0
   BDLNumDayltCtrls[402] = 0
   BDLNumDayltCtrls[403] = 0
   BDLNumDayltCtrls[404] = 0
   BDLNumDayltCtrls[405] = 0
   BDLNumDayltCtrls[406] = 0
   ActAreaType = ( "Comm/Ind Work (General, High Bay)", 
                   "Storage (Conditioned)", "- select another -", 
                   "- select another -", "- select another -", 
                   "- select another -", "- select another -", 
                   "- select another -" )
   PercentArea[1] = 89
   PercentArea[2] = 11
   SeasonType[1] = "Typical Use"
   OpenSeas1[6] = "8 am"
   CloseSeas1[1] = "6 pm"
   CloseSeas1[6] = "6 pm"
   OccShape[1] = "EL2 Occup Profile (S1)"
   ILShape[1] = "EL2 InsLtg Profile (S1)"
   ILElecIntens[1] = 2
   ELDayShapes = ( "EL2 ExtLtg DayShape (Jan)", 
                   "EL2 ExtLtg DayShape (Feb)", 
                   "EL2 ExtLtg DayShape (Mar)", 
                   "EL2 ExtLtg DayShape (Apr)", 
                   "EL2 ExtLtg DayShape (May)", 
                   "EL2 ExtLtg DayShape (Jun)", 
                   "EL2 ExtLtg DayShape (Jul)", 
                   "EL2 ExtLtg DayShape (Aug)", 
                   "EL2 ExtLtg DayShape (Sep)", 
                   "EL2 ExtLtg DayShape (Oct)", 
                   "EL2 ExtLtg DayShape (Nov)", 
                   "EL2 ExtLtg DayShape (Dec)" )
   OEShape[1] = "EL2 OffEq Profile (S1)"
   MiscShape[1] = "EL2 Misc Profile (S1)"
   MiscDivEIntens[1] = 0
   DHWShape[1] = "EL1 DHW Profile (S1)"
   DaylitAreaCurrent[3] = 1
   RoofZoneErrorCode = 4
   ..

ShapeWiz   "EL2 InsLtg Profile (S1)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Jan)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Feb)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Mar)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Apr)"  
   ..

DayShape   "EL2 ExtLtg DayShape (May)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Jun)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Jul)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Aug)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Sep)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Oct)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Nov)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Dec)"  
   ..

ShapeWiz   "EL2 OffEq Profile (S1)"  
   ..

ShapeWiz   "EL2 Misc Profile (S1)"  
   ..

ShapeWiz   "EL2 DHW Profile (S1)"  
   ..

ShapeWiz   "EL2 Occup Profile (S1)"  
   ..

CustomZone   "Custom Zone 6"  
   NumVerts = 8
   X[1] = 74.2
   X[2] = 74.2
   X[3] = 128
   X[4] = 128.15
   X[5] = 121.5
   X[6] = 121.5
   X[7] = 92.2
   X[8] = 92.2
   Y[1] = 124.5
   Y[2] = 37.2
   Y[3] = 37.2
   Y[4] = 106.1
   Y[5] = 106.1
   Y[6] = 109.1
   Y[7] = 109.1
   Y[8] = 124.5
   ..

CustomZone   "Custom Zone 7"  
   NumVerts = 6
   X[1] = 92.2
   X[2] = 92.2
   X[3] = 121.5
   X[4] = 121.5
   X[5] = 128.15
   X[6] = 128.1
   Y[1] = 124.5
   Y[2] = 109.1
   Y[3] = 109.1
   Y[4] = 106.1
   Y[5] = 106.1
   Y[6] = 124.4
   MultiLevel = 1
   MLLowerSpcHeight = 10
   PctOccupLowerML = 5
   PctOtherLowerML = 10
   ..

ZnGrpWiz   "EL2 Ground Floor Core"  
   ShortName = "GndCor"
   ..

ZnGrpWiz   "EL2 Ground Floor Perimeter"  
   ShortName = "GndPrm"
   ..

ShellWiz   "HOSE TOWER"  
   ScreenIDArrIdx = 1
   ScreenIDArrID = 22
   BldgType = "Storage, Conditioned Low Bay"
   GrossArea = 290
   ShellPos_Ref = "OFFICE AREA"
   ShellPos_Dist = 0
   ShellPos_Specify = 1
   BldgX = 0
   BldgY = 0
   Footprint = "- custom -"
   FlrToFlr = 36
   FlrToCeiling = 36
   ZoningPattern = "One Per Floor"
   NumMCZnGrps = 0
   DiagLink = "HOSE TOWER Diag Data"
   RoofBrdInsType = "4 in. polystyrene (R-20)"
   VertExtBrdInsType = "2 in. polyisocyanurate (R-14)"
   VertExtSecInsType = "- no batt -"
   VertExtIntInsType = "- no board insulation -"
   ZoningCurrent = 1
   NumFloorVertices = 4
   FloorVertX[1] = 59.2
   FloorVertX[2] = 74.2
   FloorVertX[3] = 74.3
   FloorVertX[4] = 59.2
   FloorVertY[1] = 113
   FloorVertY[2] = 113.1
   FloorVertY[3] = 136.2
   FloorVertY[4] = 136.1
   AdiabaticPercent[1] = 89
   AdiabaticPercent[2] = 30
   AdiabaticX[1] = 32.47
   AdiabaticX[2] = 0
   AdiabaticHeight[1] = 32
   AdiabaticHeight[2] = 24.5
   AdiabaticCurrent = 1
   ZoneGroupsOK = 1
   DfltZnGrpName = ( "EL3 Underground Areas", "EL3 Ground Floor", 
                     "EL3 Ground Floor", "EL3 Typical Floor(s)", 
                     "EL3 Typical Floor(s)", "EL3 Top Floor", 
                     "EL3 Top Floor" )
   CustomFootprint = 1
   CustomRoofZoning = -1
   ActiveRoofZoneIdx = 1
   FloorArea = 347.65
   FloorPerimLen = 76.3009
   LastFootprint = 1
   GTCCategory[1] = "Double Low-E"
   GTCCategory[2] = "- select another -"
   GlassTypeCode[1] = "Dbl Low-E (e2=.1) Tint 1/4in, 1/4in Air (2636)"
   WindowHeight[1] = 7.9
   WinFrameType[1] = "Alum w/ Brk, Fixed, Mtl Spacer"
   WinAreaSpecMethod = "Percent of Net Wall Area (floor to ceiling)"
   PercentGlass1[1] = 7
   PercentGlass2[1] = 7
   DoorType[1] = "Opaque"
   NumExtDoors3[1] = 2
   NumExtDoors4[1] = 0
   DoorWidth[1] = 3
   OpaqueDoorType[1] = "Steel, Polyurethane core w/ Brk"
   DoorHeight[1] = 7
   TypWindowWidth[1] = 3.96
   SkyZonesCurrent = 1
   SkyltZones[1] = 1
   SkyltZones[2] = 1
   SkyltZones[3] = 1
   SkyltZones[4] = 1
   SkyltZones[5] = 1
   SkyPosCurrent = 1
   DayZonesCurrent[3] = 1
   DayltZones[1] = 1
   DayltZones[2] = 1
   DayltZones[3] = 1
   DayltZones[4] = 1
   DayltZones[5] = 0
   DayltZones[401] = 1
   DayltZones[402] = 1
   DayltZones[403] = 1
   DayltZones[404] = 1
   DayltZones[405] = 0
   WinDoorCurrent = 1
   DetailsCurrent = ( 1, 1, 1 )
   BDLNumDayltCtrls[1] = 0
   BDLNumDayltCtrls[2] = 0
   BDLNumDayltCtrls[3] = 0
   BDLNumDayltCtrls[4] = 0
   BDLNumDayltCtrls[5] = 0
   BDLNumDayltCtrls[401] = 0
   BDLNumDayltCtrls[402] = 0
   BDLNumDayltCtrls[403] = 0
   BDLNumDayltCtrls[404] = 0
   BDLNumDayltCtrls[405] = 0
   ActAreaType[1] = "Storage (Conditioned)"
   ActAreaType[2] = "- select another -"
   ActAreaType[3] = "- select another -"
   ActAreaType[4] = "- select another -"
   ActAreaType[5] = "- select another -"
   PercentArea[1] = 100
   SeasonType[1] = "Typical Use"
   OpenSeas1[7] = "7 am"
   CloseSeas1[1] = "6 pm"
   CloseSeas1[6] = "6 pm"
   OccShape[1] = "EL3 Occup Profile (S1)"
   ILShape[1] = "EL3 InsLtg Profile (S1)"
   ELDayShapes = ( "EL3 ExtLtg DayShape (Jan)", 
                   "EL3 ExtLtg DayShape (Feb)", 
                   "EL3 ExtLtg DayShape (Mar)", 
                   "EL3 ExtLtg DayShape (Apr)", 
                   "EL3 ExtLtg DayShape (May)", 
                   "EL3 ExtLtg DayShape (Jun)", 
                   "EL3 ExtLtg DayShape (Jul)", 
                   "EL3 ExtLtg DayShape (Aug)", 
                   "EL3 ExtLtg DayShape (Sep)", 
                   "EL3 ExtLtg DayShape (Oct)", 
                   "EL3 ExtLtg DayShape (Nov)", 
                   "EL3 ExtLtg DayShape (Dec)" )
   OEShape[1] = "EL3 OffEq Profile (S1)"
   MiscShape[1] = "EL3 Misc Profile (S1)"
   DHWShape[1] = "EL3 DHW Profile (S1)"
   DaylitAreaCurrent[3] = 1
   RoofZoneErrorCode = 4
   ..

ShapeWiz   "EL3 InsLtg Profile (S1)"  
   ..

DayShape   "EL3 ExtLtg DayShape (Jan)"  
   ..

DayShape   "EL3 ExtLtg DayShape (Feb)"  
   ..

DayShape   "EL3 ExtLtg DayShape (Mar)"  
   ..

DayShape   "EL3 ExtLtg DayShape (Apr)"  
   ..

DayShape   "EL3 ExtLtg DayShape (May)"  
   ..

DayShape   "EL3 ExtLtg DayShape (Jun)"  
   ..

DayShape   "EL3 ExtLtg DayShape (Jul)"  
   ..

DayShape   "EL3 ExtLtg DayShape (Aug)"  
   ..

DayShape   "EL3 ExtLtg DayShape (Sep)"  
   ..

DayShape   "EL3 ExtLtg DayShape (Oct)"  
   ..

DayShape   "EL3 ExtLtg DayShape (Nov)"  
   ..

DayShape   "EL3 ExtLtg DayShape (Dec)"  
   ..

ShapeWiz   "EL3 OffEq Profile (S1)"  
   ..

ShapeWiz   "EL3 Misc Profile (S1)"  
   ..

ShapeWiz   "EL3 DHW Profile (S1)"  
   ..

ShapeWiz   "EL3 Occup Profile (S1)"  
   ..

ZnGrpWiz   "EL3 Ground Floor"  
   ShortName = "GndFlr"
   ..

AdjWall   "Adjoining Wall 2"  
   ..

ShellWiz   "RADIO RM"  
   ModelEnduse[3] = 1
   ScreenIDArrIdx = 1
   ScreenIDArrID = 22
   BldgType = "Unknown, Custom or Mixed Use"
   GrossArea = 202
   ShellPos_Ref = "OFFICE AREA"
   ShellPos_Dir = "South"
   ShellPos_Dist = 0
   ShellPos_Specify = 1
   BldgX = 0
   BldgY = 0
   Footprint = "- custom -"
   FlrToFlr = 12.54
   FlrToCeiling = 11.55
   ZoningPattern = "- custom -"
   NumMCZnGrps = 0
   DiagLink = "REDIO RM Diag Data"
   RoofBrdInsType = "4 in. polystyrene (R-20)"
   VertExtBrdInsType = "2 in. polyisocyanurate (R-14)"
   VertExtSecInsType = "- no batt -"
   VertExtIntInsType = "- no board insulation -"
   ZoningCurrent = 1
   NumFloorVertices = 4
   FloorVertX[1] = 55.5
   FloorVertX[2] = 74.1
   FloorVertX[3] = 74.1
   FloorVertX[4] = 55.5
   FloorVertY[1] = 29.9
   FloorVertY[2] = 29.9
   FloorVertY[3] = 42.4
   FloorVertY[4] = 42.4
   AdiabaticPercent[3] = 100
   AdiabaticCurrent = 1
   ZoneGroupsOK = 1
   DfltZnGrpName = ( "EL4 Underground Areas", "EL4 Ground Floor", 
                     "EL4 Ground Floor", "EL4 Typical Floor(s)", 
                     "EL4 Typical Floor(s)", "EL4 Top Floor", 
                     "EL4 Top Floor" )
   CustomFootprint = 1
   CustomZoning = 1
   ActiveZoneIndex = 1
   CustomRoofZoning = -1
   ActiveRoofZoneIdx = 1
   FloorArea = 232.5
   FloorPerimLen = 62.2
   LastFootprint = 1
   GTCCategory[1] = "Double Low-E"
   GTCCategory[2] = "- select another -"
   GlassTypeCode[1] = "Dbl Low-E (e2=.1) Tint 1/4in, 1/4in Air (2636)"
   WinFrameType[1] = "Alum w/ Brk, Fixed, Mtl Spacer"
   PercentGlass1[1] = 21
   PercentGlass2[1] = 0
   DoorType[1] = "- select another -"
   TypWindowWidth[1] = 4.95
   SkyZonesCurrent = 1
   SkyltZones[1] = 1
   SkyltZones[2] = 1
   SkyltZones[3] = 1
   SkyltZones[4] = 1
   SkyltZones[5] = 1
   SkyPosCurrent = 1
   DayZonesCurrent[3] = 1
   DayltZones[1] = 1
   DayltZones[2] = 1
   DayltZones[3] = 1
   DayltZones[4] = 1
   DayltZones[5] = 0
   DayltZones[401] = 1
   DayltZones[402] = 1
   DayltZones[403] = 1
   DayltZones[404] = 1
   DayltZones[405] = 0
   WinDoorCurrent = 1
   DetailsCurrent = ( 1, 1, 1 )
   BDLNumDayltCtrls[1] = 0
   BDLNumDayltCtrls[2] = 0
   BDLNumDayltCtrls[3] = 0
   BDLNumDayltCtrls[4] = 0
   BDLNumDayltCtrls[5] = 0
   BDLNumDayltCtrls[401] = 0
   BDLNumDayltCtrls[402] = 0
   BDLNumDayltCtrls[403] = 0
   BDLNumDayltCtrls[404] = 0
   BDLNumDayltCtrls[405] = 0
   ActAreaType = ( "Unknown", "- select another -", "- select another -", 
                   "- select another -", "- select another -", 
                   "- select another -", "- select another -", 
                   "- select another -" )
   PercentArea[1] = 100
   SeasonType[1] = "Typical Use"
   OpenSeas1[6] = "8 am"
   CloseSeas1[1] = "6 pm"
   CloseSeas1[6] = "6 pm"
   OccShape[1] = "EL4 Occup Profile (S1)"
   ILShape[1] = "EL4 InsLtg Profile (S1)"
   ELDayShapes = ( "EL4 ExtLtg DayShape (Jan)", 
                   "EL4 ExtLtg DayShape (Feb)", 
                   "EL4 ExtLtg DayShape (Mar)", 
                   "EL4 ExtLtg DayShape (Apr)", 
                   "EL4 ExtLtg DayShape (May)", 
                   "EL4 ExtLtg DayShape (Jun)", 
                   "EL4 ExtLtg DayShape (Jul)", 
                   "EL4 ExtLtg DayShape (Aug)", 
                   "EL4 ExtLtg DayShape (Sep)", 
                   "EL4 ExtLtg DayShape (Oct)", 
                   "EL4 ExtLtg DayShape (Nov)", 
                   "EL4 ExtLtg DayShape (Dec)" )
   OEShape[1] = "EL4 OffEq Profile (S1)"
   OEElecIntens[1] = 2.5
   MiscShape[1] = "EL4 Misc Profile (S1)"
   DHWShape[1] = "EL4 DHW Profile (S1)"
   DaylitAreaCurrent[3] = 1
   RoofZoneErrorCode = 4
   ..

ShapeWiz   "EL4 InsLtg Profile (S1)"  
   ..

DayShape   "EL4 ExtLtg DayShape (Jan)"  
   ..

DayShape   "EL4 ExtLtg DayShape (Feb)"  
   ..

DayShape   "EL4 ExtLtg DayShape (Mar)"  
   ..

DayShape   "EL4 ExtLtg DayShape (Apr)"  
   ..

DayShape   "EL4 ExtLtg DayShape (May)"  
   ..

DayShape   "EL4 ExtLtg DayShape (Jun)"  
   ..

DayShape   "EL4 ExtLtg DayShape (Jul)"  
   ..

DayShape   "EL4 ExtLtg DayShape (Aug)"  
   ..

DayShape   "EL4 ExtLtg DayShape (Sep)"  
   ..

DayShape   "EL4 ExtLtg DayShape (Oct)"  
   ..

DayShape   "EL4 ExtLtg DayShape (Nov)"  
   ..

DayShape   "EL4 ExtLtg DayShape (Dec)"  
   ..

ShapeWiz   "EL4 OffEq Profile (S1)"  
   ..

ShapeWiz   "EL4 Misc Profile (S1)"  
   ..

ShapeWiz   "EL4 DHW Profile (S1)"  
   ..

ShapeWiz   "EL4 Occup Profile (S1)"  
   ..

CustomZone   "Custom Zone 8"  
   NumVerts = 4
   X[1] = 55.5
   X[2] = 74.1
   X[3] = 74.1
   X[4] = 55.5
   Y[1] = 29.9
   Y[2] = 29.9
   Y[3] = 42.4
   Y[4] = 42.4
   ..

ZnGrpWiz   "EL4 Ground Floor"  
   ShortName = "GndFlr"
   ..

DiagData   "Bldg Envelope & Loads 1 Diag Data"  
   PolyWndGridRes = 2
   PolyWndLwrLeftX = -110
   PolyWndLwrLeftY = -28
   PolyWndWidth = 468
   ShowCADLayer[1] = 1
   ShowCADLayer[2] = 0
   ShowCADLayer[3] = 0
   ShowCADLayer[4] = 1
   ShowCADLayer[5] = 1
   ShowCADLayer[6] = 1
   ShowCADLayer[7] = 1
   ShowCADLayer[8] = 1
   ShowCADLayer[9] = 1
   ShowCADLayer[10] = 1
   ShowCADLayer[11] = 1
   ShowCADLayer[12] = 1
   ShowCADLayer[13] = 1
   ShowCADLayer[14] = 1
   ShowCADLayer[15] = 1
   ShowCADLayer[16] = 0
   ShowCADLayer[17] = 1
   ShowCADLayer[18] = 1
   ShowCADLayer[19] = 1
   ShowCADLayer[20] = 1
   ShowCADLayer[21] = 1
   ShowCADLayer[22] = 1
   ShowCADLayer[23] = 0
   ShowCADLayer[24] = 1
   ShowCADLayer[25] = 1
   ShowCADLayer[26] = 1
   ShowCADLayer[27] = 1
   ShowCADLayer[28] = 1
   ShowCADLayer[29] = 1
   ShowCADLayer[30] = 1
   ShowCADLayer[31] = 0
   ShowCADLayer[32] = 1
   ShowCADLayer[33] = 1
   ShowCADLayer[34] = 1
   ShowCADLayer[35] = 1
   ShowCADLayer[36] = 1
   ShowCADLayer[37] = 1
   ShowCADLayer[38] = 1
   ShowCADLayer[39] = 1
   ShowCADLayer[40] = 1
   ShowCADLayer[41] = 1
   ShowCADLayer[42] = 1
   ShowCADLayer[43] = 1
   ShowCADLayer[44] = 1
   ShowCADLayer[45] = 1
   ShowCADLayer[46] = 1
   ShowCADLayer[47] = 1
   ShowCADLayer[48] = 1
   ShowCADLayer[49] = 1
   ShowCADLayer[50] = 1
   ShowCADLayer[51] = 1
   ShowCADLayer[52] = 1
   ShowCADLayer[53] = 1
   ShowCADLayer[54] = 1
   ShowCADLayer[55] = 1
   ShowCADLayer[56] = 1
   ShowCADLayer[57] = 1
   ShowCADLayer[58] = 1
   ShowCADLayer[59] = 1
   ShowCADLayer[60] = 1
   ShowCADLayer[61] = 1
   ShowCADLayer[62] = 1
   CADFileComp = "0820 DD floor plans - DWG"
   ..

DiagData   "EL2 Bldg Envelope & Loads 1 Diag Data"  
   PolyWndGridRes = 2
   PolyWndLwrLeftX = -15.3
   PolyWndLwrLeftY = 32.4
   PolyWndWidth = 159.886
   ShowCADLayer[1] = 1
   ShowCADLayer[2] = 0
   ShowCADLayer[3] = 0
   ShowCADLayer[4] = 1
   ShowCADLayer[5] = 1
   ShowCADLayer[6] = 1
   ShowCADLayer[7] = 1
   ShowCADLayer[8] = 1
   ShowCADLayer[9] = 1
   ShowCADLayer[10] = 1
   ShowCADLayer[11] = 1
   ShowCADLayer[12] = 1
   ShowCADLayer[13] = 1
   ShowCADLayer[14] = 1
   ShowCADLayer[15] = 1
   ShowCADLayer[16] = 0
   ShowCADLayer[17] = 1
   ShowCADLayer[18] = 1
   ShowCADLayer[19] = 1
   ShowCADLayer[20] = 1
   ShowCADLayer[21] = 1
   ShowCADLayer[22] = 1
   ShowCADLayer[23] = 0
   ShowCADLayer[24] = 1
   ShowCADLayer[25] = 1
   ShowCADLayer[26] = 1
   ShowCADLayer[27] = 1
   ShowCADLayer[28] = 1
   ShowCADLayer[29] = 1
   ShowCADLayer[30] = 1
   ShowCADLayer[31] = 0
   ShowCADLayer[32] = 1
   ShowCADLayer[33] = 1
   ShowCADLayer[34] = 1
   ShowCADLayer[35] = 1
   ShowCADLayer[36] = 1
   ShowCADLayer[37] = 1
   ShowCADLayer[38] = 1
   ShowCADLayer[39] = 1
   ShowCADLayer[40] = 1
   ShowCADLayer[41] = 1
   ShowCADLayer[42] = 1
   ShowCADLayer[43] = 1
   ShowCADLayer[44] = 1
   ShowCADLayer[45] = 1
   ShowCADLayer[46] = 1
   ShowCADLayer[47] = 1
   ShowCADLayer[48] = 1
   ShowCADLayer[49] = 1
   ShowCADLayer[50] = 1
   ShowCADLayer[51] = 1
   ShowCADLayer[52] = 1
   ShowCADLayer[53] = 1
   ShowCADLayer[54] = 1
   ShowCADLayer[55] = 1
   ShowCADLayer[56] = 1
   ShowCADLayer[57] = 1
   ShowCADLayer[58] = 1
   ShowCADLayer[59] = 1
   ShowCADLayer[60] = 1
   ShowCADLayer[61] = 1
   ShowCADLayer[62] = 1
   CADFileComp = "0820 DD floor plans - DWG"
   ..

DiagData   "HOSE TOWER Diag Data"  
   PolyWndGridRes = 3
   PolyWndLwrLeftX = -29.9
   PolyWndLwrLeftY = 36.9
   PolyWndWidth = 160.457
   CADFileComp = "0820 DD floor plans - DWG"
   ..

DiagData   "REDIO RM Diag Data"  
   PolyWndGridRes = 3
   PolyWndLwrLeftX = -143.65
   PolyWndLwrLeftY = -18
   PolyWndWidth = 526.5
   CADFileComp = "0820 DD floor plans - DWG"
   ..

DiagData   "test Diag Data"  
   ..

CADFile   "0820 DD floor plans - DWG"  
   FileName = "3-CAD\Source\2009-12-16\0820 DD floor plans.dwg"
   FilePathOffset = 4
   ScaleUnits = 2
   ScaleValue = 0.1
   OriginX = -7280.43
   OriginY = 102693
   Azimuth = 0
   ..

HVACWiz   "HVAC System 1"  
   ScreenIDArrIdx = 0
   ScreenIDArrID = 112
   CoolSource[1] = "Chilled Water Coils"
   HVACSysType[1] = "4-Pipe Fan Coils with HW Heat"
   CoolOccTemp[1] = 72
   DesignCoolTemp[1] = 72
   SystemPerWhat[1] = "System per Zone"
   ..

HVACWiz   "HVAC System-Garage"  
   ScreenIDArrIdx = 0
   ScreenIDArrID = 112
   CoolSource[1] = "Chilled Water Coils"
   HVACSysType[1] = "4-Pipe Fan Coils with HW Heat"
   CoolOccTemp[1] = 76
   HeatOccTemp[1] = 60
   DesignCoolTemp[1] = 76
   DesignHeatTemp[1] = 60
   SystemPerWhat[1] = "System per Zone"
   ..

DXCWWiz   "Water-Cooled DX System"  
   ..

WSECWWiz   "Wtr-Side Econo System"  
   ..

WLHPWiz   "WSHP System"  
   ScreenIDArrIdx = 0
   BoilerCombEff = 90
   ..

GSHPWiz   "GSHP System"  
   ScreenIDArrIdx = 0
   ScreenIDArrID = 184
   GHXDepth = 30
   ..

PrimWiz   "Primary HVAC Plant"  
   CHWScrnIDArrIdx = 2
   CHWScrnIDArrID = 211
   HWScrnIDArrIdx = 1
   HWScrnIDArrID = 231
   ChillerType[1] = "Electric Reciprocating Hermetic"
   ChillerType[2] = "Electric Reciprocating Hermetic"
   CondenserType[1] = "Water-Cooled"
   CondenserType[2] = "Water-Cooled"
   HWSysSetpoint[1] = 140
   BoilerCount[1] = 2
   BoilerCombEff[1] = 90
   ..

DHWWiz   "DHW Plant 1"  
   ScreenIDArrIdx = 0
   ScreenIDArrID = 241
   DHWStorageCap = 70
   DHWEffSpec = "Efficiency and Standby Loss"
   DHWEfficiency = 0.88
   DHWStandbyLoss = 1
   ..

FacetColor   "By Wall Type"  
   FacetType = "Walls"
   ColorOption = "By Wall Type"
   ..

FacetColor   "By Construction"  
   FacetType = "Walls"
   ColorOption = "By Construction"
   ..

FacetColor   "Uniform"  
   FacetType = "Windows"
   ColorOption = "Uniform"
   ..

FacetColor   "By Glass Type"  
   FacetType = "Windows"
   ColorOption = "By Glass Type"
   ..

Light3D   "Light3D - Default"  
   Type = "Default"
   ..

Light3D   "Light3D - User1"  
   Type = "User Defined 1"
   ..

Light3D   "Light3D - User2"  
   Type = "User Defined 2"
   ..

Light3D   "Light3D - User3"  
   Type = "User Defined 3"
   ..

Light3D   "Light3D - User4"  
   Type = "User Defined 4"
   ..

Light3D   "Light3D - User5"  
   Type = "User Defined 5"
   ..

ERateWiz   "Custom Elec Rate"  
   Version = 1
   RateType = "Uniform Charges"
   HaveSecSeason = 0
   CustChargeType = "$ / Day"
   CustChargeAmt[1] = 0.1617
   UniformChargeKWH[1] = 0.0769
   TOUPeriodsChecked = 1
   TOUPeriodErrSeas1 = " "
   TOUPeriodErrS1b = " "
   ..

FRateWiz   "Custom Gas Rate"  
   Version = 1
   RateType = "Uniform Charges"
   CustChargeAmt[1] = 33.53
   UniformChargeUse[1] = 1.7361
   EBlockTypeSeas1[1] = "Therm Block"
   ..

DHWEEM   "DHW EEM Comp"  
   ..


END_OF_FILE