<div>Hello All,</div>
<div> </div>
<div>I am fairly new to using Equest. (version 3.63). In a 12 page overview, it indicates that future enhancements to Equest will include building energy code compliance checking, initially: California Title 24 and later, ASHRAE 90-1. When modeling the base building for comparisons, I think the goal would be to enter data that allows the base to just pass the 90-1 criteria, such as a minimum btuh/ square foot efficiency. This would permit the greatest difference to be shown in a comparison.  </div>

<div> </div>
<div>How does Equest control the base model to meet this 90-1 minimum? Is there a built-in data checking/ evaluation/ editing mechanism or is it up to the user to enter the exact minimum value data to show the base model just meeting 90-1? Are certain parts of the Equest program calculating mechanism following 90-1? </div>

<div> </div>
<div>Thank you in advance,</div>
<div> <br>-- <br>John Wearstler<br>Senior Designer<br>Larsen Engineering, Inc.<br>4662 Larwell Drive<br>Columbus, Ohio 43220<br><br>614-459-4002 (voice)<br>614-459-3124 (fax)<br><a href="mailto:jwearstler@larseneng.com">jwearstler@larseneng.com</a> (e-mail)<br>
<br>This transmission may contain information that is privileged, confidential, or exempt from disclosure under applicable law.  If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein is strictly prohibited.  If you received this transmission in error, please contact the sender and destroy the material in its entirety.<br>
<br>Email transmission cannot be guaranteed secure or error-free. Computer viruses can be transmitted via email - check email and any attachments for viruses. Larsen Engineering Inc. does not accept liability for errors or omissions resulting from transmission or any damage caused by a virus transmitted by this email. </div>