<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=us-ascii">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7654.12">
<TITLE>Dedicated Outdoor Air Unit</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/rtf format -->
<P><FONT SIZE=2 FACE="Arial">Fellow eQuesters,</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Could someone please advise me on the best way to model the following systems in eQuest.</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">I have a multizone unit that serves all the zones in my building. However, there are two zones that have a very high occupancy thus very high outdoor air rate a couple of times a year (requiring ~ 2300 cfm extra than during normal occupancy). I would like to serve these two zones using a dedicated outdoor air system (single zone unit) that is enabled once the CO2 levels get too high in the zones. </FONT></P>
<P><FONT SIZE=2 FACE="Arial">Should I set up the multizone unit to borrow conditioned OA from the dedicated OA unit? If so, I'm not sure on exactly how this is done. Any advice is greatly appreciated.</FONT></P>
<P><FONT SIZE=2 FACE="Arial">Thank you,</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Kyle Nisonger</FONT>
<BR><FONT SIZE=2 FACE="Arial">Mechanical Engineer, LEED® AP</FONT>
<BR><FONT SIZE=2 FACE="Arial">US Army Corps of Engineers</FONT>
<BR><FONT SIZE=2 FACE="Arial">Kansas City District</FONT>
<BR><FONT SIZE=2 FACE="Arial">(816) 389-3224 </FONT>
</P>
</BODY>
</HTML>