You have to set your color printer as your default printer in the windows control panel in order for eQuest to print in color. Then when your done you can change it back to default to your black and white printer.<br><br>lol,<br>
<br><div dir="ltr"><div>Robert Yoakum, <font style="background-color: rgb(255, 102, 102); font-weight: bold;" color="#33cc00"><font style="background-color: rgb(255, 255, 204);"><font size="2">LEED</font></font></font><font style="background-color: rgb(255, 102, 102);" color="#33cc00"><font style="background-color: rgb(255, 255, 204);"><font size="2"><font size="1"><sup><span style="font-size: 10pt; color: rgb(31, 73, 125);"><font color="#33cc00">®</font></span></sup></font></font></font></font><font style="background-color: rgb(255, 102, 102); font-weight: bold;" color="#33cc00"><font style="background-color: rgb(255, 255, 204);"><span style="font-size: 10pt; color: rgb(31, 73, 125);"></span></font></font><font style="background-color: rgb(255, 102, 102); font-weight: bold;" color="#33cc00"><font style="background-color: rgb(255, 255, 204);"><span style="font-size: 10pt; color: rgb(31, 73, 125);"><font color="#33cc00"> <font size="2">AP</font></font></span></font></font><br>
Designer<br>Larsen Engineering, Inc.<br>4662 Larwell Drive<br>Columbus, Ohio 43220 <br><br>614-459-4002 (voice)<br>614-459-3124 (fax)<br><a href="mailto:ryoakum@larseneng.com" target="_blank">ryoakum@larseneng.com</a> (e-mail)<br>
<br>This transmission may contain information that is privileged,
confidential, or exempt from disclosure under applicable law. If you
are not the intended recipient, you are hereby notified that any
disclosure, copying, distribution, or use of the information contained
herein is strictly prohibited. If you received this transmission in
error, please contact the sender and destroy the material in its
entirety.<br>
<br>Email transmission cannot be guaranteed secure or error-free.
Computer viruses can be transmitted via email - check email and any
attachments for viruses. Larsen Engineering Inc. does not accept
liability for errors or omissions resulting from transmission or any
damage caused by a virus transmitted by this email. </div></div><br><br><div class="gmail_quote">On Wed, Aug 5, 2009 at 3:09 PM, <span dir="ltr"><<a href="mailto:equest-users-request@lists.onebuilding.org">equest-users-request@lists.onebuilding.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Send Equest-users mailing list submissions to<br>
<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
<br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:equest-users-request@lists.onebuilding.org">equest-users-request@lists.onebuilding.org</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:equest-users-owner@lists.onebuilding.org">equest-users-owner@lists.onebuilding.org</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of Equest-users digest..."<br>
<br>Today's Topics:<br>
<br>
1. Printing Graphical Reports (Jeff Brown)<br>
2. Re: Printing Graphical Reports (Jeremy McClanathan)<br>
3. Re: Printing Graphical Reports (Dan Myers)<br>
4. Re: Printing Graphical Reports (Charles Land)<br>
5. LEED Related Modeling (ron lamarre)<br>
6. DX/HW Dual-duct AHU (Muldoon, Kevin)<br>
7. Re: DX/HW Dual-duct AHU (B. Fountain)<br>
8. Chiller Type (Zareh, Hassan)<br>
9. Re: Chiller Type (B. Fountain)<br>
10. Pumps & Aux gas load (Crockett, Jim)<br>
11. Re: Pumps & Aux gas load (Frank Hartley)<br>
12. eQUEST Training October 13 & 14 (Lee DeBaillie)<br>
13. Heat recovery from the condenser to heating coil and heat<br>
recovery on air evacuation using a DX system with water-glycol<br>
(Gal, Amandine)<br>
<br><br>---------- Forwarded message ----------<br>From: Jeff Brown <jbrown@WJO.com><br>To: "<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>" <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>
Date: Tue, 4 Aug 2009 16:52:03 -0400<br>Subject: [Equest-users] Printing Graphical Reports<br>
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p>All,</p>
<p> </p>
<p>Is the fact I cannot print graphical reports in color unique
to me? All parameters are set to print in color but sent either to a .pdf file
or a printer the files are black and white.</p>
<p> </p>
<p>The 2D Chart Control Properties, when modified for 3D view,
etc., also revert to default before the document is printed.</p>
<p> </p>
<p>Can anyone offer me some help with this?</p>
<p> </p>
<p>Thank you!</p>
<p> </p>
<p>JJB</p>
<p> </p>
<p><b><span>Jeffrey J.
Brown</span></b></p>
<p><span>Operations
Manager</span></p>
<p><b><span>The
Controls Group</span></b></p>
<p><b><span style="color: green;">W.J.
O'Neil Company</span></b></p>
<p><span><a href="mailto:jbrown@wjo.com" target="_blank">jbrown@wjo.com</a></span></p>
<p> </p>
</div>
</div>
<br><br>---------- Forwarded message ----------<br>From: Jeremy McClanathan <jmcclanathan@CDiengineers.com><br>To: 'Jeff Brown' <jbrown@WJO.com>, "<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>" <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>
Date: Tue, 4 Aug 2009 16:26:16 -0700<br>Subject: Re: [Equest-users] Printing Graphical Reports<br>
<div>
<p>
</p><div>
<p><span style="color: rgb(31, 73, 125);">I had the same problem in the
past. The solution for me was to set the color printer as my default
printer.</span></p>
<p><span style="color: rgb(31, 73, 125);">Jeremy</span></p>
<p><span style="color: rgb(31, 73, 125);"> </span></p>
<div>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;"> Jeff Brown
[mailto:<a href="mailto:jbrown@WJO.com" target="_blank">jbrown@WJO.com</a>] <br>
<b>Sent:</b> Tuesday, August 04, 2009 1:52 PM<br>
<b>To:</b> <a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a><br>
<b>Subject:</b> [Equest-users] Printing Graphical Reports</span></p>
</div>
</div>
<p> </p>
<p>All,</p>
<p> </p>
<p>Is the fact I cannot print graphical reports in color unique
to me? All parameters are set to print in color but sent either to a .pdf file
or a printer the files are black and white.</p>
<p> </p>
<p>The 2D Chart Control Properties, when modified for 3D view, etc.,
also revert to default before the document is printed.</p>
<p> </p>
<p>Can anyone offer me some help with this?</p>
<p> </p>
<p>Thank you!</p>
<p> </p>
<p>JJB</p>
<p> </p>
<p><b><span>Jeffrey J.
Brown</span></b></p>
<p><span>Operations
Manager</span></p>
<p><b><span>The
Controls Group</span></b></p>
<p><b><span style="color: green;">W.J.
O'Neil Company</span></b></p>
<p><span><a href="mailto:jbrown@wjo.com" target="_blank">jbrown@wjo.com</a></span></p>
<p> </p>
</div>
<p><font size="1" color="#808080" face="Verdana">This email message, including any attachments, is for the sole use of the intended recipient and may contain confidential, proprietary, and/or privileged information, as well as content subject to copyright and other intellectual laws. If you are not the intended recipient, you may not disclose, use, copy, or distribute the email message or its attachments. If you believe you have received this email message in error, please contact the sender by reply email, immediately delete this email and destroy copies.</font></p>
</div>
<br><br>---------- Forwarded message ----------<br>From: "Dan Myers" <<a href="mailto:dmyers@rnm-engineers.com">dmyers@rnm-engineers.com</a>><br>To: "'Jeff Brown'" <jbrown@WJO.com>, <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>
Date: Wed, 5 Aug 2009 07:34:07 -0400<br>Subject: Re: [Equest-users] Printing Graphical Reports<br>
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;">We’ve had the same problem in our office.
Even with a color printer as our default, it would still print in black and
white (even though it previews in color). We’ve had to make our PDF
writer our default printer and print to a PDF file.</span></font></p>
<p><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;"> </span></font></p>
<div>
<p><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;">Dan Myers</span></font><font size="2" color="navy"><span style="font-size: 10pt; color: navy;"></span></font></p>
<p><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;">RNM Engineers</span></font><font size="2" color="navy"><span style="font-size: 10pt; color: navy;"></span></font></p>
<p><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;">409 North Haywood Street</span></font><font size="3" color="navy"><span style="font-size: 12pt; color: navy;"></span></font></p>
<p><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;">Waynesville</span></font><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;">, NC 28786</span></font><font color="navy"><span style="color: navy;"></span></font></p>
<p><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;">Tel: 828-456-9851 ext. 110</span></font><font color="navy"><span style="color: navy;"></span></font></p>
<p><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;">Fax: 828-456-6205</span></font><font color="navy"><span style="color: navy;"></span></font></p>
<p><font size="2" color="navy" face="Arial"><span style="font-size: 10pt; font-family: Arial; color: navy;"><a href="mailto:dmyers@rnm-engineers.com" target="_blank">dmyers@rnm-engineers.com</a></span></font><font color="navy"><span style="color: navy;"></span></font></p>
<p><font size="5" color="green" face="Webdings"><span style="font-size: 16pt; font-family: Webdings; color: green;">P</span></font><font size="5" color="navy"><span style="font-size: 16pt; color: navy;"> </span></font><font size="1" color="green" face="Arial Narrow"><span style="font-size: 8pt; font-family: "Arial Narrow"; color: green;">Save resources. Please print with discretion.</span></font><font size="1" color="#1f497d" face="Arial Narrow"><span style="font-size: 8pt; font-family: "Arial Narrow"; color: rgb(31, 73, 125);"></span></font></p>
<p><font size="2" color="navy" face="Calibri"><span style="font-size: 11pt; color: navy;"> </span></font><font size="3" face="Times New Roman"><span style="font-size: 12pt; font-family: "Times New Roman";"></span></font></p>
</div>
<div>
<div style="text-align: center;" align="center"><font size="3" face="Times New Roman"><span style="font-size: 12pt; font-family: "Times New Roman";">
<hr align="center" size="2" width="100%">
</span></font></div>
<p><b><font size="2" face="Tahoma"><span style="font-size: 10pt; font-family: Tahoma; font-weight: bold;">From:</span></font></b><font size="2" face="Tahoma"><span style="font-size: 10pt; font-family: Tahoma;"> <a href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a>
[mailto:<a href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a>] <b><span style="font-weight: bold;">On Behalf Of </span></b>Jeff Brown<br>
<b><span style="font-weight: bold;">Sent:</span></b> Tuesday, August 04, 2009
4:52 PM<br>
<b><span style="font-weight: bold;">To:</span></b>
<a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a><br>
<b><span style="font-weight: bold;">Subject:</span></b> [Equest-users] Printing
Graphical Reports</span></font><font size="3" face="Times New Roman"><span style="font-size: 12pt; font-family: "Times New Roman";"></span></font></p>
</div>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;"> </span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;">All,</span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;"> </span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;">Is
the fact I cannot print graphical reports in color unique to me? All parameters
are set to print in color but sent either to a .pdf file or a printer the files
are black and white.</span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;"> </span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;">The
2D Chart Control Properties, when modified for 3D view, etc., also revert to
default before the document is printed.</span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;"> </span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;">Can
anyone offer me some help with this?</span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;"> </span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;">Thank
you!</span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;"> </span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;">JJB</span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;"> </span></font></p>
<p><b><font size="2" face="Arial"><span style="font-size: 11pt; font-family: Arial; font-weight: bold;">Jeffrey J. Brown</span></font></b></p>
<p><font size="2" face="Arial"><span style="font-size: 11pt; font-family: Arial;">Operations Manager</span></font></p>
<p><b><font size="2" face="Arial"><span style="font-size: 11pt; font-family: Arial; font-weight: bold;">The Controls Group</span></font></b></p>
<p><b><font size="2" color="green" face="Arial"><span style="font-size: 11pt; font-family: Arial; color: green; font-weight: bold;">W.J.
O'Neil Company</span></font></b></p>
<p><font size="2" face="Arial"><span style="font-size: 11pt; font-family: Arial;"><a href="mailto:jbrown@wjo.com" target="_blank">jbrown@wjo.com</a></span></font></p>
<p><font size="2" face="Calibri"><span style="font-size: 11pt;"> </span></font></p>
<div style="text-align: center;" align="center"><font size="3" face="Times New Roman"><span style="font-size: 12pt; font-family: "Times New Roman";">
size=2 width="100%"
align=center>
</span></font></div>
<table style="width: 100%;" border="0" cellpadding="0" width="100%">
<tbody><tr>
<td style="padding: 0.75pt;">
<table style="width: 100%;" border="0" cellpadding="0" width="100%">
<tbody><tr>
<td style="padding: 0.75pt;">
<p><b><font size="1" color="#5d5f8f" face="Times New Roman"><span style="font-size: 9pt; font-family: "Times New Roman"; color: rgb(93, 95, 143); font-weight: bold;">Total Control Panel</span></font></b></p>
</td>
<td style="padding: 0.75pt;">
<p style="text-align: right;" align="right"><font size="1" color="black" face="Times New Roman"><span style="font-size: 9pt; font-family: "Times New Roman"; color: black;"><a href="https://asp-4.reflexion.net/login?domain=rnm-engineers.com" target="_blank">Login</a></span></font></p>
</td>
</tr>
</tbody></table>
<p><font size="1" color="black" face="Arial"><span style="font-size: 9pt; font-family: Arial; color: black;"></span></font></p>
</td>
</tr>
<tr>
<td style="padding: 0.75pt;">
<table style="width: 100%;" border="0" cellpadding="0" width="100%">
<tbody><tr>
<td style="padding: 0.75pt; width: 30%;" valign="top" width="30%">
<table border="0" cellpadding="0">
<tbody><tr>
<td style="padding: 0.75pt;">
<p><font size="1" color="black" face="Times New Roman"><span style="font-size: 9pt; font-family: "Times New Roman"; color: black;">To: <a href="https://asp-4.reflexion.net/address-properties?aID=54337127" target="_blank">dmyers@rnm-engineers.com</a></span></font></p>
</td>
</tr>
<tr>
<td style="padding: 0.75pt;">
<p><font size="1" color="black" face="Times New Roman"><span style="font-size: 9pt; font-family: "Times New Roman"; color: black;">From: <a href="https://asp-4.reflexion.net/address-properties?aID=54601063" target="_blank">equest-users-bounces@lists.onebuilding.org</a></span></font></p>
</td>
</tr>
</tbody></table>
<p><font size="3" face="Times New Roman"><span style="font-size: 12pt; font-family: "Times New Roman";"></span></font></p>
</td>
<td style="padding: 0.75pt;" valign="top">
<table border="0" cellpadding="0">
<tbody><tr>
<td style="padding: 0.75pt;">
<p><font size="1" color="black" face="Times New Roman"><span style="font-size: 9pt; font-family: "Times New Roman"; color: black;"><a href="https://asp-4.reflexion.net/FooterAction?ver=1&un-wl-sender-address=1&rID=54337127&aID=54601063" target="_blank">Remove</a>
this sender from my allow list</span></font></p>
</td>
</tr>
</tbody></table>
<p><font size="3" face="Times New Roman"><span style="font-size: 12pt; font-family: "Times New Roman";"></span></font></p>
</td>
</tr>
</tbody></table>
<p><font size="1" color="black" face="Arial"><span style="font-size: 9pt; font-family: Arial; color: black;"></span></font></p>
</td>
</tr>
<tr>
<td style="padding: 0.75pt;">
<table border="0" cellpadding="0">
<tbody><tr>
<td style="padding: 0.75pt;">
<p><i><font size="1" color="black" face="Times New Roman"><span style="font-size: 9pt; font-family: "Times New Roman"; color: black; font-style: italic;">You received this message because the sender is on your
allow list.</span></font></i></p>
</td>
</tr>
</tbody></table>
<p><font size="1" color="black" face="Arial"><span style="font-size: 9pt; font-family: Arial; color: black;"></span></font></p>
</td>
</tr>
</tbody></table>
<p><font size="3" face="Times New Roman"><span style="font-size: 12pt; font-family: "Times New Roman";"> </span></font></p>
</div>
</div>
<br><br>---------- Forwarded message ----------<br>From: Charles Land <<a href="mailto:cland@geo-marine.com">cland@geo-marine.com</a>><br>To: "<a href="mailto:dmyers@rnm-engineers.com">dmyers@rnm-engineers.com</a>" <<a href="mailto:dmyers@rnm-engineers.com">dmyers@rnm-engineers.com</a>>, 'Jeff Brown' <jbrown@WJO.com>, "<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>" <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>
Date: Wed, 5 Aug 2009 07:20:08 -0500<br>Subject: Re: [Equest-users] Printing Graphical Reports<br>
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p><span style="color: rgb(31, 73, 125);">You have to go under your start
menu, choose your printer preferences and change to color through there.</span></p>
<p><span style="color: rgb(31, 73, 125);"> </span></p>
<div>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;">
<a href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a>
[mailto:<a href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a>] <b>On Behalf Of </b>Dan
Myers<br>
<b>Sent:</b> Wednesday, August 05, 2009 7:34 AM<br>
<b>To:</b> 'Jeff Brown'; <a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a><br>
<b>Subject:</b> Re: [Equest-users] Printing Graphical Reports</span></p>
</div>
</div>
<p> </p>
<p><span style="font-size: 10pt; color: navy;">We’ve had the same problem in our office. Even with a color
printer as our default, it would still print in black and white (even though it
previews in color). We’ve had to make our PDF writer our default printer
and print to a PDF file.</span></p>
<p><span style="font-size: 10pt; color: navy;"> </span></p>
<div>
<p><span style="font-size: 10pt; color: navy;">Dan Myers</span><span style="font-size: 10pt; color: navy;"></span></p>
<p><span style="font-size: 10pt; color: navy;">RNM Engineers</span><span style="font-size: 10pt; color: navy;"></span></p>
<p><span style="font-size: 10pt; color: navy;">409 North Haywood Street</span><span style="font-size: 12pt; color: navy;"></span></p>
<p><span style="font-size: 10pt; color: navy;">Waynesville, NC 28786</span><span style="color: navy;"></span></p>
<p><span style="font-size: 10pt; color: navy;">Tel: 828-456-9851 ext. 110</span><span style="color: navy;"></span></p>
<p><span style="font-size: 10pt; color: navy;">Fax: 828-456-6205</span><span style="color: navy;"></span></p>
<p><span style="font-size: 10pt; color: navy;"><a href="mailto:dmyers@rnm-engineers.com" target="_blank">dmyers@rnm-engineers.com</a></span><span style="color: navy;"></span></p>
<p><span style="font-size: 16pt; font-family: Webdings; color: green;">P</span><span style="font-size: 16pt; color: navy;"> </span><span style="font-size: 8pt; color: green;">Save
resources. Please print with discretion.</span><span style="font-size: 8pt; color: rgb(31, 73, 125);"></span></p>
<p><span style="color: navy;"> </span><span style="font-size: 12pt; font-family: "Times New Roman","serif";"></span></p>
</div>
<div>
<div style="text-align: center;" align="center"><span style="font-size: 12pt; font-family: "Times New Roman","serif";">
<hr align="center" size="2" width="100%">
</span></div>
<p><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;">
<a href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a>
[mailto:<a href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a>] <b>On Behalf Of </b>Jeff
Brown<br>
<b>Sent:</b> Tuesday, August 04, 2009 4:52 PM<br>
<b>To:</b> <a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a><br>
<b>Subject:</b> [Equest-users] Printing Graphical Reports</span><span style="font-size: 12pt; font-family: "Times New Roman","serif";"></span></p>
</div>
<p> </p>
<p>All,</p>
<p> </p>
<p>Is the fact I cannot print graphical reports in color unique
to me? All parameters are set to print in color but sent either to a .pdf file
or a printer the files are black and white.</p>
<p> </p>
<p>The 2D Chart Control Properties, when modified for 3D view,
etc., also revert to default before the document is printed.</p>
<p> </p>
<p>Can anyone offer me some help with this?</p>
<p> </p>
<p>Thank you!</p>
<p> </p>
<p>JJB</p>
<p> </p>
<p><b><span>Jeffrey J.
Brown</span></b></p>
<p><span>Operations
Manager</span></p>
<p><b><span>The
Controls Group</span></b></p>
<p><b><span style="color: green;">W.J.
O'Neil Company</span></b></p>
<p><span><a href="mailto:jbrown@wjo.com" target="_blank">jbrown@wjo.com</a></span></p>
<p> </p>
<p style="text-align: center;" align="center"><span style="font-size: 12pt; font-family: "Times New Roman","serif";"><hr size=2
width="100%" align=center> </span></p>
<table style="width: 100%;" border="0" cellpadding="0" cellspacing="3" width="100%">
<tbody><tr>
<td style="padding: 0.75pt;">
<table style="width: 100%;" border="0" cellpadding="0" cellspacing="3" width="100%">
<tbody><tr>
<td style="padding: 0.75pt;">
<p><b><span style="font-size: 9pt; font-family: "Times New Roman","serif"; color: rgb(93, 95, 143);">Total Control Panel</span></b></p>
</td>
<td style="padding: 0.75pt;">
<p style="text-align: right;" align="right"><span style="font-size: 9pt; font-family: "Times New Roman","serif"; color: black;"><a href="https://asp-4.reflexion.net/login?domain=rnm-engineers.com" target="_blank">Login</a></span></p>
</td>
</tr>
</tbody></table>
</td>
</tr>
<tr>
<td style="padding: 0.75pt;">
<table style="width: 100%;" border="0" cellpadding="0" cellspacing="3" width="100%">
<tbody><tr>
<td style="padding: 0.75pt; width: 30%;" valign="top" width="30%">
<table border="0" cellpadding="0" cellspacing="3">
<tbody><tr>
<td style="padding: 0.75pt;">
<p><span style="font-size: 9pt; font-family: "Times New Roman","serif"; color: black;">To: <a href="https://asp-4.reflexion.net/address-properties?aID=54337127" target="_blank">dmyers@rnm-engineers.com</a></span></p>
</td>
</tr>
<tr>
<td style="padding: 0.75pt;">
<p><span style="font-size: 9pt; font-family: "Times New Roman","serif"; color: black;">From: <a href="https://asp-4.reflexion.net/address-properties?aID=54601063" target="_blank">equest-users-bounces@lists.onebuilding.org</a></span></p>
</td>
</tr>
</tbody></table>
</td>
<td style="padding: 0.75pt;" valign="top">
<table border="0" cellpadding="0" cellspacing="3">
<tbody><tr>
<td style="padding: 0.75pt;">
<p><span style="font-size: 9pt; font-family: "Times New Roman","serif"; color: black;"><a href="https://asp-4.reflexion.net/FooterAction?ver=1&un-wl-sender-address=1&rID=54337127&aID=54601063" target="_blank">Remove</a>
this sender from my allow list</span></p>
</td>
</tr>
</tbody></table>
</td>
</tr>
</tbody></table>
</td>
</tr>
<tr>
<td style="padding: 0.75pt;">
<table border="0" cellpadding="0" cellspacing="3">
<tbody><tr>
<td style="padding: 0.75pt;">
<p><i><span style="font-size: 9pt; font-family: "Times New Roman","serif"; color: black;">You received this message because the sender is on your allow
list.</span></i></p>
</td>
</tr>
</tbody></table>
</td>
</tr>
</tbody></table>
<p><span style="font-size: 12pt; font-family: "Times New Roman","serif";"> </span></p>
</div>
</div>
<br><br>---------- Forwarded message ----------<br>From: ron lamarre <<a href="mailto:lamarre_arch@yahoo.com">lamarre_arch@yahoo.com</a>><br>To: <a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a><br>
Date: Wed, 5 Aug 2009 06:41:47 -0700 (PDT)<br>Subject: [Equest-users] LEED Related Modeling<br><div><div style="font-family: arial,helvetica,sans-serif; font-size: 10pt; color: rgb(0, 0, 0);"><div></div>
<div>Hi to all:</div>
<div> </div>
<div>I'd like to see if anyone else has run into the following issues and/or can assist with the resolution.</div>
<div> </div>
<div>1. How does one model an ERV for one zone on a multi-zone PVVT system. ie: one constant-volume RTU with four zones with change-over bypass dampers. The ERV is placed in the supply duct to one zone and is controlled with demand control sensors. It appears in eQuest, the DCV controls only work system wide.</div>
<div> </div>
<div>2. We're using a low-temp condensing DHW to heat potable water as well as two split system AHUs. There does not seem to be a selection for this type of DHW under the HVAC heating coil options; however, there is a condensing boiler option. When we reduce the water load (40% DHW reduction) and input the low temp (110F) and high efficiency of the actual DHW, we are seeing a 58% saving in fuel (gas) over the 80% Et baseline. Does this sound correct?</div>
<div> </div>
<div>3. We have tsak lighting in each office/workspace of this commercial office building for individual occupant controllability. We included the task lighting power density in the Space-by-Space allowable W/SF for the baseline. In the proposed model, the task lighting power is added to the fixed lighting power for the total lighting W/SF. Should the power for the task lighting also be added to the baseline as a process load?</div>
<div> </div>
<div> </div>
<div>Thanks for your help.<br> </div>
<div>
<div>
<div>
<div><font size="1" face="verdana"><b>Ron Lamarre, AIA, NCARB</b></font></div>
<div><font face="verdana"><font size="1">Architect - <b>LEED AP</b></font></font></div>
<div><br><font face="verdana"><font size="1"><b>L A M A R R E A R C H I T E C T S</b> <br>3 Hoyt Circle <br>Atkinson NH 03811 <br></font></font></div></div></div></div>
<div></div></div><br>
</div><br><br>---------- Forwarded message ----------<br>From: "Muldoon, Kevin" <<a href="mailto:kmuldoon@ameresco.com">kmuldoon@ameresco.com</a>><br>To: "<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>" <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>
Date: Wed, 5 Aug 2009 11:21:41 -0400<br>Subject: [Equest-users] DX/HW Dual-duct AHU<br>
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p><span style="color: rgb(0, 101, 164);">I am trying to model a HVAC
system that is a multi-zone AHU (one AHU for the building (1 floor)) and it has
HW heat with DX cooling but it is also a double duct system. I need some help
on getting around to model this system.</span></p>
<p><span style="color: rgb(0, 101, 164);"> </span></p>
<p><span style="color: rgb(0, 101, 164);">Thanks</span></p>
<p><span style="color: rgb(0, 101, 164);">Kevin
Muldoon</span><span style="color: rgb(0, 101, 164);"></span></p>
<p><span style="color: rgb(0, 101, 164);">Mechanical
Engineering Co-op</span></p>
<p><span style="color: rgb(0, 101, 164);"><img src="cid:image001.jpg@01CA15BE.E84BED20" alt="cid:710031015@04062009-29F5" height="32" width="150"></span></p>
<p><span style="color: rgb(0, 101, 164);">9000
Wessex Place Suite #304</span><span style="color: rgb(0, 101, 164);"></span></p>
<p><span style="color: rgb(0, 101, 164);">Louisville,
Kentucky 40222</span></p>
<p><span style="color: rgb(0, 133, 63);">P
502 420 1980</span><span style="color: rgb(0, 133, 63);"></span></p>
<p><span style="color: rgb(0, 133, 63);">F
502 420 1998</span><span style="color: rgb(0, 133, 63);"></span></p>
<p><span style="color: rgb(0, 133, 63);">C
502 552 5930</span></p>
<p><span style="color: rgb(0, 133, 63);">E
<a href="mailto:kmuldoon@ameresco.com" target="_blank"><span style="color: rgb(0, 133, 63);">kmuldoon@ameresco.com</span></a></span><span style="color: rgb(0, 133, 63);"></span></p>
<p> </p>
</div>
</div>
<pre> **************************************************************************************
NOTE: This e-mail may contain PRIVILEGED and CONFIDENTIAL information and is intended only for the use of the specific individual(s) to which it is addressed. If you are not an intended recipient of this e-mail, you are hereby notified that any unauthorized use, dissemination or copying of this e-mail or the information contained in it or attached to it is strictly prohibited. If you have received this e-mail in error, please delete it and immediately notify the person named above by reply e-mail. Thank you.
**************************************************************************************
</pre><br><br>---------- Forwarded message ----------<br>From: "B. Fountain" <<a href="mailto:bfountain@greensim.com">bfountain@greensim.com</a>><br>To: "Muldoon, Kevin" <<a href="mailto:kmuldoon@ameresco.com">kmuldoon@ameresco.com</a>><br>
Date: Wed, 5 Aug 2009 11:28:51 -0400 (EDT)<br>Subject: Re: [Equest-users] DX/HW Dual-duct AHU<br>Sounds like a packaged multizone system to me -- have a look at the system<br>
diagram in the DOE2 help file to see if it meets your requirements. It is<br>
even available in the DD wizard.<br>
<br>
> I am trying to model a HVAC system that is a multi-zone AHU (one AHU for<br>
> the building (1 floor)) and it has HW heat with DX cooling but it is also<br>
> a double duct system. I need some help on getting around to model this<br>
> system.<br>
><br>
> Thanks<br>
> Kevin Muldoon<br>
> Mechanical Engineering Co-op<br>
> [cid:image001.jpg@01CA15BE.E84BED20]<br>
> 9000 Wessex Place Suite #304<br>
> Louisville, Kentucky 40222<br>
> P 502 420 1980<br>
> F 502 420 1998<br>
> C 502 552 5930<br>
> E <a href="mailto:kmuldoon@ameresco.com">kmuldoon@ameresco.com</a><mailto:<a href="mailto:kmuldoon@ameresco.com">kmuldoon@ameresco.com</a>><br>
><br>
><br>
> **************************************************************************************<br>
> NOTE: This e-mail may contain PRIVILEGED and CONFIDENTIAL information and<br>
> is intended only for the use of the specific individual(s) to which it is<br>
> addressed. If you are not an intended recipient of this e-mail, you are<br>
> hereby notified that any unauthorized use, dissemination or copying of<br>
> this e-mail or the information contained in it or attached to it is<br>
> strictly prohibited. If you have received this e-mail in error, please<br>
> delete it and immediately notify the person named above by reply e-mail.<br>
> Thank you.<br>
> **************************************************************************************<br>
><br>
_______________________________________________<br>
> Equest-users mailing list<br>
> <a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
> To unsubscribe from this mailing list send a blank message to<br>
> <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
><br>
<br>
<br>
<br>
<br><br>---------- Forwarded message ----------<br>From: "Zareh, Hassan" <<a href="mailto:Hassan.Zareh@stantec.com">Hassan.Zareh@stantec.com</a>><br>To: <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>
Date: Wed, 5 Aug 2009 09:34:29 -0600<br>Subject: [Equest-users] Chiller Type<br>
<div style="font-size: 10pt; color: rgb(0, 0, 0); font-family: Arial;">
<div><span>Hi,</span></div>
<div><span>I'm modeling a high rise residential
building. The proposed building has one centrifugal chiller but based on ASHRAE,
the reference building should have two rotary screw chillers, but eQuest doesn't
allow me to have different type of chillers in parametric run. In parametric run
when I try to change the type of the chiller, the program crashes. Any
comment?</span></div>
<div><span></span> </div>
<div><span>Thanks in advance.</span></div>
<div> </div>
<div style="font-size: 9pt; font-family: Arial;" align="left"><b>Hassan Zareh,
M.Eng., P.Eng., LEED® AP</b><br>Project Engineer<br>Stantec Consulting
Ltd.<br><font color="gray">100 - 401 Wellington Street West<br>Toronto ON M5V
1E7<br>Ph: (416) 598-7642<br>Fx: (416) 596-6680<br><a href="mailto:hzareh@stantec.com" target="_blank">hzareh@stantec.com</a>
</font></div>
<div style="font-size: 13pt; font-family: Arial Narrow;" align="left"><a style="text-decoration: none;" href="http://www.stantec.com/" target="_blank"><b><font color="#993333">stantec</font></b><font color="#003f6e">.com</font></a>
</div>
<div style="font-size: 9pt; font-family: Arial;" align="left"> </div>
<div style="font-size: 9pt; font-family: Arial;" align="left">The content of this
email is the confidential property of Stantec and should not be copied,
modified, retransmitted, or used for any purpose except with Stantec's written
authorization. If you are not the intended recipient, please delete all copies
and notify us immediately.</div>
<div style="font-size: 10pt; font-family: Arial;" align="left"> </div>
<div><span style="font-size: 13.5pt; color: rgb(0, 128, 64); font-family: Webdings;">ü</span> <span style="font-size: 10pt; color: rgb(0, 128, 64); font-family: 'Arial Narrow';" lang="EN-GB">Please
consider the environment before printing this email.</span></div></div>
<br><br>---------- Forwarded message ----------<br>From: "B. Fountain" <<a href="mailto:bfountain@greensim.com">bfountain@greensim.com</a>><br>To: "Zareh, Hassan" <<a href="mailto:Hassan.Zareh@stantec.com">Hassan.Zareh@stantec.com</a>><br>
Date: Wed, 5 Aug 2009 12:09:51 -0400 (EDT)<br>Subject: Re: [Equest-users] Chiller Type<br>One possible solution would be to define both refrigeration plants in the<br>
baseline model and then create two Equipment Controls -- one for the<br>
proposed building with only the single centrifugal chiller enabled and one<br>
for the ASHRAE reference with the 2 screw chillers enabled (without the<br>
centrifugal). In the parametric run for the chilled water loop you can<br>
change the Cool Equipment Control selection under loop control.<br>
<br>
Check the PS-H report for all chillers to see that the strategy worked.<br>
<br>
<br>
> Hi,<br>
> I'm modeling a high rise residential building. The proposed building has<br>
> one centrifugal chiller but based on ASHRAE, the reference building should<br>
> have two rotary screw chillers, but eQuest doesn't allow me to have<br>
> different type of chillers in parametric run. In parametric run when I try<br>
> to change the type of the chiller, the program crashes. Any comment?<br>
><br>
> Thanks in advance.<br>
><br>
> Hassan Zareh, M.Eng., P.Eng., LEED® AP<br>
> Project Engineer<br>
> Stantec Consulting Ltd.<br>
> 100 - 401 Wellington Street West<br>
> Toronto ON M5V 1E7<br>
> Ph: (416) 598-7642<br>
> Fx: (416) 596-6680<br>
> <a href="mailto:hzareh@stantec.com">hzareh@stantec.com</a><br>
> <a href="http://stantec.com" target="_blank">stantec.com</a> <<a href="http://www.stantec.com/" target="_blank">http://www.stantec.com/</a>><br>
><br>
> The content of this email is the confidential property of Stantec and<br>
> should not be copied, modified, retransmitted, or used for any purpose<br>
> except with Stantec's written authorization. If you are not the intended<br>
> recipient, please delete all copies and notify us immediately.<br>
><br>
> ü Please consider the environment before printing this email.<br>
> _______________________________________________<br>
> Equest-users mailing list<br>
> <a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
> To unsubscribe from this mailing list send a blank message to<br>
> <a href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
><br>
<br>
<br>
<br>
<br><br>---------- Forwarded message ----------<br>From: "Crockett, Jim" <<a href="mailto:Jcrockett@nexant.com">Jcrockett@nexant.com</a>><br>To: <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>
Date: Wed, 5 Aug 2009 10:01:07 -0700<br>Subject: [Equest-users] Pumps & Aux gas load<br>
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;">Any idea what type of gas loads would show up in the “Pumps
& Aux” category? The BEPS report shows 69 therms of Natural Gas
consumption in the “Pumps & Aux” category. Have combed through
the model, but can’t find where this is coming from. I checked the
meter, and no direct loads have been assigned to this category. Any thoughts?</span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;"> </span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;">Thanks,</span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;"> </span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;"> </span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;">Jim Crockett, P.E.</span></font></p>
<p><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> </span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;">Senior Project Engineer</span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;">Energy & Carbon Management</span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;">Nexant, Inc.</span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;">4021 S. 700 E., Suite 250</span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;">Salt Lake City</span></font><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;">, Utah 84107</span></font></p>
<p><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> </span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;">(801) 639-5603 - phone</span></font></p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;">(801) 266-4786 - fax</span></font></p>
<p><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> </span></font></p>
</div>
</div>
<br><br>---------- Forwarded message ----------<br>From: Frank Hartley <<a href="mailto:fhartley@dynamix-ltd.com">fhartley@dynamix-ltd.com</a>><br>To: "Crockett, Jim" <<a href="mailto:Jcrockett@nexant.com">Jcrockett@nexant.com</a>>, "<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>" <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>
Date: Wed, 5 Aug 2009 13:06:04 -0400<br>Subject: Re: [Equest-users] Pumps & Aux gas load<br>
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Equest includes furnace pilot lights in this category. Check the
unitary power tab under your system’s heating and look for Furnace Fuel
Auxiliary.</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<div>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0in 0in;">
<p><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;">
<a href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a>
[mailto:<a href="mailto:equest-users-bounces@lists.onebuilding.org" target="_blank">equest-users-bounces@lists.onebuilding.org</a>] <b>On Behalf Of </b>Crockett,
Jim<br>
<b>Sent:</b> Wednesday, August 05, 2009 1:01 PM<br>
<b>To:</b> <a href="mailto:equest-users@lists.onebuilding.org" target="_blank">equest-users@lists.onebuilding.org</a><br>
<b>Subject:</b> [Equest-users] Pumps & Aux gas load</span></p>
</div>
</div>
<p> </p>
<p><span style="font-size: 10pt;">Any
idea what type of gas loads would show up in the “Pumps & Aux”
category? The BEPS report shows 69 therms of Natural Gas consumption in
the “Pumps & Aux” category. Have combed through the model, but can’t
find where this is coming from. I checked the meter, and no direct loads
have been assigned to this category. Any thoughts?</span></p>
<p><span style="font-size: 10pt;"> </span></p>
<p><span style="font-size: 10pt;">Thanks,</span></p>
<p><span style="font-size: 10pt;"> </span></p>
<p><span style="font-size: 10pt;"> </span></p>
<p><span style="font-size: 10pt;">Jim
Crockett, P.E.</span></p>
<p> </p>
<p><span style="font-size: 10pt;">Senior
Project Engineer</span></p>
<p><span style="font-size: 10pt;">Energy
& Carbon Management</span></p>
<p><span style="font-size: 10pt;">Nexant,
Inc.</span></p>
<p><span style="font-size: 10pt;">4021 S.
700 E., Suite 250</span></p>
<p><span style="font-size: 10pt;">Salt
Lake City, Utah 84107</span></p>
<p> </p>
<p><span style="font-size: 10pt;">(801)
639-5603 - phone</span></p>
<p><span style="font-size: 10pt;">(801)
266-4786 - fax</span></p>
<p> </p>
</div>
</div>
<br><br>---------- Forwarded message ----------<br>From: Lee DeBaillie <<a href="mailto:ldebaillie@ecw.org">ldebaillie@ecw.org</a>><br>To: "<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>" <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>
Date: Wed, 5 Aug 2009 10:31:27 -0700<br>Subject: [Equest-users] eQUEST Training October 13 & 14<br>
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;">eQUESTers,</span></font></p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> </span></font></p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;">The Energy Center of
Wisconsin will be sponsoring Introductory and Intermediate eQUEST training on October
13th & 14th 2009 in Wauwatosa,</span></font></p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;">Wisconsin</span></font>
- just outside of Milwaukee.
</p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> </span></font></p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;">The first day will
provide instruction on early design modeling approaches using the SD and DD
wizards. The second day will focus on more in-depth modeling using the eQUEST
detailed interface. </span></font></p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> </span></font></p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;">Follow the link below for
details, training agenda, and to register on-line.</span></font></p>
<p style=""><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;"><a href="http://www.ecw.org/university/ecuevent.php?ecuid=232" title="http://www.ecw.org/university/ecuevent.php?ecuid=232" target="_blank">http://www.ecw.org/university/ecuevent.php?ecuid=232</a>
</span></font></p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> </span></font></p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;">Registration is $289/day
or $469 for both days.</span></font></p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;"> </span></font></p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;">Lee DeBaillie</span></font></p>
<p style=""><font size="3" face="Times New Roman"><span style="font-size: 12pt;">Energy</span></font>
Center of Wisconsin</p>
<p><font size="2" face="Arial"><span style="font-size: 10pt; font-family: Arial;"> </span></font></p>
</div>
</div>
<br><br>---------- Forwarded message ----------<br>From: "Gal, Amandine" <<a href="mailto:Amandine.Gal@snclavalin.com">Amandine.Gal@snclavalin.com</a>><br>To: <<a href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>><br>
Date: Wed, 5 Aug 2009 14:15:52 -0400<br>Subject: [Equest-users] Heat recovery from the condenser to heating coil and heat recovery on air evacuation using a DX system with water-glycol<br>
<div>
<div><font size="2" face="Arial"><span>Dear Equest users,
</span></font></div>
<div><font size="2" face="Arial"><span></span></font> </div>
<div><font size="2" face="Arial"><span>I just arrived to
Canada and I have to make a model of a building in Montréal for LEED. I would
like to know if Equest has the features to model the HVAC systems of this
building.</span></font></div>
<div><font size="2" face="Arial"><span></span></font> </div>
<div><font size="2" face="Arial"><span>To reduce the
heating consumption, we would like to take the heat from the condensers of the
different chillers to use it to heat the heating coils of the ventilation
system. Moreover, we would like to recover the heat for the air evacuation with
direct expansion system to heat the condenser.</span></font></div>
<div><font size="2" face="Arial"><span></span></font> </div>
<div><font size="2" face="Arial"><span>Do you think that is
possible to model it with EQuest? and if yes, ( I hope because if not, I have to
model it with EnergyPlus but it will be quite more complicated), how to do
it?</span></font></div>
<div><font size="2" face="Arial"><span></span></font> </div>
<div><font size="2" face="Arial"><span>Thank you in
advance.</span></font></div>
<div><font size="2" face="Arial"><span></span></font> </div>
<div><font size="2" face="Arial"><span>Regards</span></font></div>
<div> </div>
<div align="left">
<p style="margin: 0cm 0cm 0pt;" align="left"><b><span style="font-size: 10pt; font-family: Arial;">Amandine Gal</span></b><span style="font-size: 7.5pt; font-family: Arial;"> </span></p>
<p style="margin: 0cm 0cm 0pt;"><span style="font-size: 7.5pt; font-family: Arial;">Spécialiste en
ingénierie</span></p>
<p style="margin: 0cm 0cm 0pt;"><span style="font-size: 7.5pt; font-family: Arial;">Division Transport, Infrastructures
et Bâtiment</span></p>
<p style="margin: 0cm 0cm 0pt;"> </p>
<p style="margin: 0cm 0cm 0pt;"><b><span style="font-size: 10pt; font-family: Arial;">SNC-Lavalin inc.</span></b></p>
<p style="margin: 0cm 0cm 0pt;"><span style="font-size: 7.5pt; font-family: Arial;">8000 boul. Décarie, 3e étage</span>
</p>
<p style="margin: 0cm 0cm 0pt;"><span style="font-size: 7.5pt; font-family: Arial;">Montréal (Québec)</span></p>
<p style="margin: 0cm 0cm 0pt;"><span style="font-size: 7.5pt; font-family: Arial;">Canada H4P 2S4</span></p>
<p style="margin: 0cm 0cm 0pt;"><span style="font-size: 7.5pt; font-family: Arial;">Téléphone: 514-735-5651 poste
2346</span></p>
<p style="margin: 0cm 0cm 0pt;"><span style="font-size: 7.5pt; font-family: Arial;">Télécopieur:
514-737-7988</span></p>
<p style="margin: 0cm 0cm 0pt;"><span style="font-size: 7.5pt; font-family: Arial;">Courriel: <u><span style="color: blue;">amandine.gal</span></u></span><span style="font-size: 7.5pt;"><a title="mailto:amandine.gal@snclavalin.com
mailto:prénom.nom@snclavalin.com"><span style="font-family: Arial;"><span title="mailto:amandine.gal@snclavalin.com">@snclavalin.com</span></span></a></span></p>
<p style="margin: 0cm 0cm 0pt;"><span style="font-size: 7.5pt; font-family: Arial;"><a title="http://www.snclavalin.com/">www.snclavalin.com</a></span></p></div>
<div> </div></div>
<br>_______________________________________________<br>
Equest-users mailing list<br>
<a href="mailto:Equest-users@lists.onebuilding.org">Equest-users@lists.onebuilding.org</a><br>
<a href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a><br>
<br></blockquote></div><br>